Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 1 Executive Summary written by Linda L. Lamatrice and published by . This book was released on 1978 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed over a period of two and a half years. The system was developed to project shipyard resource requirements (i.e., labor mandays and costs as well as material costs) by shipyard production shop and by ship work breakdown structure (SWBS). It enables management to assess the impact on the shipyards and ship systems of: Changes in depot-level maintenance/alterations policy; Major changes in force levels and/or composition; and Budgetary constraints.
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 3 Alterations Subsystem written by Michael J. Lamatrice and published by . This book was released on 1978 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed over a period of two and a half years by the David W. Taylor Naval Ship Research and Development Center (DTNSRDC), Code 186 for the Naval Sea Systems Command (NAVSEA), Code 070T. The System was developed to project shipyard resource requirements (i.e., labor mandays and costs as well as material costs) by shipyard production shop and by ship work breakdown structure (SWBS). It enables management to assess the impact on the shipyards and ship systems of changes in depot-level maintenance/alterations policy, major changes in force levels and/or composition and budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. It was developed at DTNSRDC using the CDC 6000 series computers and was subsequently converted for the IBM 360/370 series computers. It is now installed and operational at the NAVSEA 070 computer terminal (which accesses an IBM 370/168 computer). This document presents the IBM 360/370 version of the DMPPS program modules. The modules have been grouped into six subsystems. Each of Volumes 2-7 of this document describes, in detail, one of these subsystems. An executive summary of the entire DMPPS is presented in Volume 1.
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 2 Preprocessor Subsystem written by Linda L. Lamatrice and published by . This book was released on 1978 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed over a period of two and a half years by the David W. Taylor Naval Ship Research and Development Center. The System was developed to project shipyard resource requirements (i.e., labor mandays and costs as well as material costs) by shipyard production shop and by ship work breakdown structure (SWBS). It enables management to assess the impact on the shipyard and ship systems of: Changes in depot-level maintenance/alterations policy; Major changes in force levels and/or composition; and Budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. This document presents the IBM 360/370 version of the DMPPS program modules. The modules have been grouped into six subsystems. Each of Volumes 2-7 of this document describes, in detail, one of these subsystems. An executive summary of the entire DMPPS is presented in Volume 1.
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 7 Feedback Subsystem written by Michael J. Lamatrice and published by . This book was released on 1978 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed by this Center (DTNSRDC) for the Naval Sea Systems Command (NAVSEA). The system was developed to project shipyard resource requirements (i.e., labor man-days and costs as well as material costs) by shipyard production shop and by ship work breakdown structure. It enables management to assess the impact on the shipyards and ship systems of: Changes in depot-level maintenance/alterations policy; Major changes in force levels and/or composition; and Budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. It was developed at DTNSRDC using the CDC 6000 series computers and was subsequently converted for the IBM 360/370 series computers. It is now installed and operational at the NAVSEA 070 computer terminal (which accesses an IBM 370/168 computer). This document presents the IBM 360/370 version of the DMPPS program modules. Each of Volumes 2-7 of this document describes, in detail, one of the program's six subsystems. An executive summary of the entire DMPPS is presented in Volume 1 (AD-A048 416).
Download or read book Computers Control Information Theory written by and published by . This book was released on 1978 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1978 with total page 1716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 5 Synthesizer Subsystem written by Jean K. St Laurent and published by . This book was released on 1978 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DMPPS (Depot Maintenance Programming and Planning System) consists of several separate modules which interface through various files. The Synthesizer module, using the program XPLODE, combines the appropriate repair and alterations matrices with estimates of direct labor mandays required for each availability from the Depot Maintenance Assignment File (DMAF) and produces a Shop File, A SWBS File, and a SWBS-Shop Matrix File. These files, which show the distribution of the projected workloads among the 9 single-digit SWBS categories and the 20 shops (19 production shop categories plus other direct), are used by the Report Generator Subsystem (Volume 6) to produce summary reports.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1978 with total page 1204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 6 Report Generator Subsystem written by Jean K. St Laurent and published by . This book was released on 1978 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed over a period of two and a half years. The System was developed to project shipyard resource requirements (i.e., labor mandays and costs as well as material costs) by shipyard production shop and by ship work breakdown structure (SWBS). It enables management to assess the impact on the shipyards and ship systems of changes in depot-level maintenance/alterations policy, major changes in force levels and/or composition, and budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. This document presents the IBM 360/370 version of the DMPPS program Report Generator Subsystem.
Download or read book A Directory of Computer Software Applications written by and published by . This book was released on 1980 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Depot Maintenance Planning and Programming System DMPPS Repair Profile Generation Programs written by Jay Madelbaum and published by . This book was released on 1977 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report documents the computer programs used for the development of the Depot Maintenance Planning and Programming System repair data base. The introduction presents an overview of the concepts behind the creation of the data base. Section 2 describes the programs which were used to convert raw input data into a usable format. Section 3 explains the program which analyzed the reformatted data. Section 4 documents the program which produced the actual elements of the repair data base after the analyses. (Author).
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 4 Repair Subsystem written by Linda L. Lamatrice and published by . This book was released on 1978 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed over a period of two and a half years by the David W. Taylor Naval Ship Research and Development Center (DTNSRDC), Code 186 for the Naval Sea Systems Command (NAVSEA), Code 070T. The System was developed to project shipyard resource requirements (i.e., labor mandays and costs as well as material costs) by shipyard production shop and by ship work breakdown structure (SWBS). It enables management to assess the impact on the shipyards and ship systems of changes in depot-level maintenance/alterations policy, major changes in force levels and/or composition, and budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. It was developed at DTNSRDC using the CDC 6000 series computers and was subsequently converted for the IBM 360/370 series computers. It is now installed and operational at the NAVSEA 070 computer terminal (which accesses an IBM 370/168 computer). This document presents the IBM 360/370 version of the DMPPS program modules.
Download or read book How I Became a Quant written by Richard R. Lindsey and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for How I Became a Quant "Led by two top-notch quants, Richard R. Lindsey and Barry Schachter, How I Became a Quant details the quirky world of quantitative analysis through stories told by some of today's most successful quants. For anyone who might have thought otherwise, there are engaging personalities behind all that number crunching!" --Ira Kawaller, Kawaller & Co. and the Kawaller Fund "A fun and fascinating read. This book tells the story of how academics, physicists, mathematicians, and other scientists became professional investors managing billions." --David A. Krell, President and CEO, International Securities Exchange "How I Became a Quant should be must reading for all students with a quantitative aptitude. It provides fascinating examples of the dynamic career opportunities potentially open to anyone with the skills and passion for quantitative analysis." --Roy D. Henriksson, Chief Investment Officer, Advanced Portfolio Management "Quants"--those who design and implement mathematical models for the pricing of derivatives, assessment of risk, or prediction of market movements--are the backbone of today's investment industry. As the greater volatility of current financial markets has driven investors to seek shelter from increasing uncertainty, the quant revolution has given people the opportunity to avoid unwanted financial risk by literally trading it away, or more specifically, paying someone else to take on the unwanted risk. How I Became a Quant reveals the faces behind the quant revolution, offering you?the?chance to learn firsthand what it's like to be a?quant today. In this fascinating collection of Wall Street war stories, more than two dozen quants detail their roots, roles, and contributions, explaining what they do and how they do it, as well as outlining the sometimes unexpected paths they have followed from the halls of academia to the front lines of an investment revolution.
Download or read book Journal of Abstracts of the British Ship Research Association written by British Ship Research Association and published by . This book was released on 1978 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consists largely of abstracts of articles and papers of interest to shipbuilders, ship owners and marine engineers.
Download or read book My Life as a Quant written by Emanuel Derman and published by John Wiley & Sons. This book was released on 2016-01-11 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In My Life as a Quant, Emanuel Derman relives his exciting journey as one of the first high-energy particle physicists to migrate to Wall Street. Page by page, Derman details his adventures in this field—analyzing the incompatible personas of traders and quants, and discussing the dissimilar nature of knowledge in physics and finance. Throughout this tale, he also reflects on the appropriate way to apply the refined methods of physics to the hurly-burly world of markets.
Download or read book Intermediate level Image Processing written by M. J. B. Duff and published by . This book was released on 1986 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here are current and wide-ranging discussions of intermediate-level image processing. This volume identifies and fills the gap between low- and high-level image processing, and will be a vital reference for computer architects, computer scientists, and researchers in image processing.
Download or read book A Guide to Complex Variables written by Steven G. Krantz and published by American Mathematical Soc.. This book was released on 2014-05-14 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quick and easy-to-use introduction to the key topics in complex variables, for mathematicians and non-mathematicians alike.
