Download or read book Control Strategies and Co Design of Networked Control Systems written by Héctor Benítez-Pérez and published by Springer. This book was released on 2018-07-31 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Networked Control System (NCS) as a particular kind of a real-time distributed system (RTDS), composed of a set of nodes, interconnected by a network, and able to develop a complete control process. It describes important parts of the control process such as sensor and actuator activities, which rely on a real-time operating system, and a real-time communication network. As the use of common bus network architecture introduces different forms of uncertainties between sensors, actuators, and controllers, several approaches such as reconfigurable systems have been developed to tackle this problem. Moreover, modeling NCS is a challenging procedure, since there are several non-linear situations, like local saturations, uncertain time delays, dead-zones, or local situations, it is necessary to deal with. The book describes a novel strategy for modelling and control based on a fuzzy control approach and codesign strategies.

Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.

Download or read book Networked Control Systems written by Fei-Yue Wang and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked control systems (NCS) confer advantages of cost reduction, system diagnosis and flexibility, minimizing wiring and simplifying the addition and replacement of individual elements; efficient data sharing makes taking globally intelligent control decisions easier with NCS. The applications of NCS range from the large scale of factory automation and plant monitoring to the smaller networks of computers in modern cars, places and autonomous robots. Networked Control Systems presents recent results in stability and robustness analysis and new developments related to networked fuzzy and optimal control. Many chapters contain case-studies, experimental, simulation or other application-related work showing how the theories put forward can be implemented. The state-of-the art research reported in this volume by an international team of contributors makes it an essential reference for researchers and postgraduate students in control, electrical, computer and mechanical engineering and computer science.

Download or read book Networked Control Systems with Intermittent Feedback written by Domagoj Tolić and published by CRC Press. This book was released on 2017-03-31 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems (NCSs) are spatially distributed systems for which the communication between sensors, actuators and controllers is realized by a shared (wired or wireless) communication network. NCSs offer several advantages, such as reduced installation and maintenance costs, as well as greater flexibility, over conventional control systems in which parts of control loops exchange information via dedicated point-to-point connections. The principal goal of this book is to present a coherent and versatile framework applicable to various settings investigated by the authors over the last several years. This framework is applicable to nonlinear time-varying dynamic plants and controllers with delayed dynamics; a large class of static, dynamic, probabilistic and priority-oriented scheduling protocols; delayed, noisy, lossy and intermittent information exchange; decentralized control problems of heterogeneous agents with time-varying directed (not necessarily balanced) communication topologies; state- and output-feedback; off-line and on-line intermittent feedback; optimal intermittent feedback through Approximate Dynamic Programming (ADP) and Reinforcement Learning (RL); and control systems with exogenous disturbances and modeling uncertainties.

Download or read book Delays and Networked Control Systems written by Alexandre Seuret and published by Springer. This book was released on 2016-06-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students.

Download or read book Networked Control Systems written by Magdi S. Mahmoud and published by Butterworth-Heinemann. This book was released on 2019-02-09 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems: Cloud Control and Secure Control explores new technological developments in networked control systems (NCS), including new techniques, such as event-triggered, secure and cloud control. It provides the fundamentals and underlying issues of networked control systems under normal operating environments and under cyberphysical attack. The book includes a critical examination of the principles of cloud computing, cloud control systems design, the available techniques of secure control design to NCS's under cyberphysical attack, along with strategies for resilient and secure control of cyberphysical systems. Smart grid infrastructures are also discussed, providing diagnosis methods to analyze and counteract impacts. Finally, a series of practical case studies are provided to cover a range of NCS's. This book is an essential resource for professionals and graduate students working in the fields of networked control systems, signal processing and distributed estimation. - Provides coverage of cloud-based approaches to control systems and secure control methodologies to protect cyberphysical systems against various types of malicious attacks - Provides an overview of control research literature and explores future developments and solutions - Includes case studies that offer solutions for issues with modeling, quantization, packet dropout, time delay and communication constraints

Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2013-03-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.

Download or read book Control Theory of Digitally Networked Dynamic Systems written by Jan Lunze and published by Springer Science & Business Media. This book was released on 2013-07-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an introduction to networked control systems and describes new modeling paradigms, analysis methods for event-driven, digitally networked systems, and design methods for distributed estimation and control. Networked model predictive control is developed as a means to tolerate time delays and packet loss brought about by the communication network. In event-based control the traditional periodic sampling is replaced by state-dependent triggering schemes. Novel methods for multi-agent systems ensure complete or clustered synchrony of agents with identical or with individual dynamics. The book includes numerous references to the most recent literature. Many methods are illustrated by numerical examples or experimental results.

Download or read book Modelling Analysis and Control of Networked Dynamical Systems written by Ziyang Meng and published by Springer Nature. This book was released on 2021-10-15 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a comprehensive exploration of new tools for modelling, analysis, and control of networked dynamical systems. Expanding on the authors’ previous work, this volume highlights how local exchange of information and cooperation among neighboring agents can lead to emergent global behaviors in a given networked dynamical system. Divided into four sections, the first part of the book begins with some preliminaries and the general networked dynamical model that is used throughout the rest of the book. The second part focuses on synchronization of networked dynamical systems, synchronization with non-expansive dynamics, periodic solutions of networked dynamical systems, and modulus consensus of cooperative-antagonistic networks. In the third section, the authors solve control problems with input constraint, large delays, and heterogeneous dynamics. The final section of the book is devoted to applications, studying control problems of spacecraft formation flying, multi-robot rendezvous, and energy resource coordination of power networks. Modelling, Analysis, and Control of Networked Dynamical Systems will appeal to researchers and graduate students interested in control theory and its applications, particularly those working in networked control systems, multi-agent systems, and cyber-physical systems. This volume can also be used in advanced undergraduate and graduate courses on networked control systems and multi-agent systems.

Download or read book Stability Control and Computation for Time Delay Systems written by Wim Michiels and published by SIAM. This book was released on 2014-12-11 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time delays are important components of many systems in, for instance, engineering, physics, economics, and the life sciences, because the transfer of material, energy, and information is usually not instantaneous. Time delays may appear as computation and communication lags, they model transport phenomena and heredity, and they arise as feedback delays in control loops. This monograph addresses the problem of stability analysis, stabilization, and robust fixed-order control of dynamical systems subject to delays, including both retarded- and neutral-type systems. Within the eigenvalue-based framework, an overall solution is given to the stability analysis, stabilization, and robust control design problem, using both analytical methods and numerical algorithms and applicable to a broad class of linear time-delay systems.? In this revised edition, the authors make the leap from stabilization to the design of robust and optimal controllers and from retarded-type to neutral-type delay systems, thus enlarging the scope of the book within control; include new, state-of-the-art material on numerical methods and algorithms to broaden the book?s focus and to reach additional research communities, in particular numerical linear algebra and numerical optimization; and increase the number and range of applications to better illustrate the effectiveness and generality of their approach.?

Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.

Download or read book Nonlinear Control Under Nonconstant Delays written by Nikolaos Bekiaris-Liberis and published by SIAM. This book was released on 2013-09-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors have developed a methodology for control of nonlinear systems in the presence of long delays, with large and rapid variation in the actuation or sensing path, or in the presence of long delays affecting the internal state of a system. In addition to control synthesis, they introduce tools to quantify the performance and the robustness properties of the designs provided in the book. The book is based on the concept of predictor feedback and infinite-dimensional backstepping transformation for linear systems and the authors guide the reader from the basic ideas of the concept?with constant delays only on the input?all the way through to nonlinear systems with state-dependent delays on the input as well as on system states. Readers will find the book useful because the authors provide elegant and systematic treatments of long-standing problems in delay systems, such as systems with state-dependent delays that arise in many applications. In addition, the authors give all control designs by explicit formulae, making the book especially useful for engineers who have faced delay-related challenges and are concerned with actual implementations and they accompany all control designs with Lyapunov-based analysis for establishing stability and performance guarantees.

Download or read book Piecewise Affine Control Continuous Time Sampled Data and Networked Systems written by Luis Rodrigues and published by SIAM. This book was released on 2019-11-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering systems operate through actuators, most of which will exhibit phenomena such as saturation or zones of no operation, commonly known as dead zones. These are examples of piecewise-affine characteristics, and they can have a considerable impact on the stability and performance of engineering systems. This book targets controller design for piecewise affine systems, fulfilling both stability and performance requirements. The authors present a unified computational methodology for the analysis and synthesis of piecewise affine controllers, taking an approach that is capable of handling sliding modes, sampled-data, and networked systems. They introduce algorithms that will be applicable to nonlinear systems approximated by piecewise affine systems, and they feature several examples from areas such as switching electronic circuits, autonomous vehicles, neural networks, and aerospace applications. Piecewise Affine Control: Continuous-Time, Sampled-Data, and Networked Systems is intended for graduate students, advanced senior undergraduate students, and researchers in academia and industry. It is also appropriate for engineers working on applications where switched linear and affine models are important.

Download or read book Internet based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.

Download or read book Analysis and Synthesis of Dynamical Systems with Time Delays written by Yuanqing Xia and published by Springer. This book was released on 2009-10-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-delay occurs in many dynamical systems such as biological systems, chemical systems, metallurgical processing systems, nuclear reactor, long transmission lines in pneumatic, hydraulic systems and electrical networks. Especially, in recent years, time-delay which exists in networked control s- temshasbroughtmorecomplexproblemintoanewresearcharea.Frequently, itisasourceofthegenerationofoscillation,instabilityandpoorperformance. Considerable e?ort has been applied to di?erent aspects of linear time-delay systems during recent years. Because the introduction of the delay factor renders the system analysis more complicated, in addition to the di?culties caused by the perturbation or uncertainties, in the control of time-delay s- tems, the problems of robust stability and robust stabilization are of great importance. This book presents some basic theories of stability and stabilization of systems with time-delay, which are related to the main results in this book. More attention will be paid on synthesis of systems with time-delay. That is, sliding mode control of systems with time-delay; networked control systems with time-delay; networked data fusion with random delay.

Download or read book Stability and Control of Time delay Systems written by Luc Dugard and published by Springer. This book was released on 1997-10-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the last decade has witnessed significant advances in control theory for finite and infinite dimensional systems, the stability and control of time-delay systems have not been fully investigated. Many problems exist in this field that are still unresolved, and there is a tendency for the numerical methods available either to be too general or too specific to be applied accurately across a range of problems. This monograph brings together the latest trends and new results in this field, with the aim of presenting methods covering a large range of techniques. Particular emphasis is placed on methods that can be directly applied to specific problems. The resulting book is one that will be of value to both researchers and practitioners.

Download or read book Control of Complex Systems written by Kyriakos Vamvoudakis and published by Butterworth-Heinemann. This book was released on 2016-07-27 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the era of cyber-physical systems, the area of control of complex systems has grown to be one of the hardest in terms of algorithmic design techniques and analytical tools. The 23 chapters, written by international specialists in the field, cover a variety of interests within the broader field of learning, adaptation, optimization and networked control. The editors have grouped these into the following 5 sections: "Introduction and Background on Control Theory, "Adaptive Control and Neuroscience, "Adaptive Learning Algorithms, "Cyber-Physical Systems and Cooperative Control, "Applications.The diversity of the research presented gives the reader a unique opportunity to explore a comprehensive overview of a field of great interest to control and system theorists. This book is intended for researchers and control engineers in machine learning, adaptive control, optimization and automatic control systems, including Electrical Engineers, Computer Science Engineers, Mechanical Engineers, Aerospace/Automotive Engineers, and Industrial Engineers. It could be used as a text or reference for advanced courses in complex control systems. • Collection of chapters from several well-known professors and researchers that will showcase their recent work • Presents different state-of-the-art control approaches and theory for complex systems • Gives algorithms that take into consideration the presence of modelling uncertainties, the unavailability of the model, the possibility of cooperative/non-cooperative goals and malicious attacks compromising the security of networked teams • Real system examples and figures throughout, make ideas concrete - Includes chapters from several well-known professors and researchers that showcases their recent work - Presents different state-of-the-art control approaches and theory for complex systems - Explores the presence of modelling uncertainties, the unavailability of the model, the possibility of cooperative/non-cooperative goals, and malicious attacks compromising the security of networked teams - Serves as a helpful reference for researchers and control engineers working with machine learning, adaptive control, and automatic control systems