Download or read book Degradation of Lipid Based Drug Delivery Systems and Characterization of Semi synthetic Spider Silk Proteins for the Application in Pharmaceutical Technology written by Martin Schwab and published by . This book was released on 2009 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silk based Drug Delivery Systems written by Elia Bari and published by Royal Society of Chemistry. This book was released on 2020-10-07 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering spider silk and silk worm cocoons, the editors elucidate the extraction, structure and properties of silk sericin and silk fibroin.
Download or read book Cellulose Based Superabsorbent Hydrogels written by Md. Ibrahim H. Mondal and published by Springer. This book was released on 2019-02-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the prospect of revolutionizing specific technologies, this book highlights the most exciting and impactful current research in the fields of cellulose-based superabsorbent hydrogels with their smart applications. The book assembles the newest synthetic routes, characterization methods, and applications in the emergent area. Leading experts in the field have contributed chapters representative of their most recent research results, shedding light on the enormous potential of this field and thoroughly presenting cellulose-based hydrogel functioning materials. The book is intended for the polymer chemists, academic and industrial scientists and engineers, pharmaceutical and biomedical scientists and agricultural engineers engaged in research and development on absorbency, absorbent products and superabsorbent hydrogels. It can also be supportive for undergraduate and graduate students.
Download or read book Natural Polymers written by Ololade Olatunji and published by Springer. This book was released on 2015-12-24 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the most recent innovations in natural polymer applications in the food, construction, electronics, biomedical, pharmaceutical, and engineering industries. The authors provide perspectives from their respective range of industries covering classification, extraction, modification, and application of natural polymers from various sources in nature. They discuss the techniques used in analysis of natural polymers in various systems incorporating natural polymers as well as their intrinsic properties.
Download or read book Biopolymers for Biomedical and Biotechnological Applications written by Bernd H. A. Rehm and published by John Wiley & Sons. This book was released on 2020-12-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight into biopolymers, their physicochemical properties, and their biomedical and biotechnological applications This comprehensive book is a one-stop reference for the production, modifications, and assessment of biopolymers. It highlights the technical and methodological advancements in introducing biopolymers, their study, and promoted applications. "Biopolymers for Biomedical and Biotechnological Applications" begins with a general overview of biopolymers, properties, and biocompatibility. It then provides in-depth information in three dedicated sections: Biopolymers through Bioengineering and Biotechnology Venues; Polymeric Biomaterials with Wide Applications; and Biopolymers for Specific Applications. Chapters cover: advances in biocompatibility; advanced microbial polysaccharides; microbial cell factories for biomanufacturing of polysaccharides; exploitation of exopolysaccharides from lactic acid bacteria; and the new biopolymer for biomedical application called nanocellulose. Advances in mucin biopolymer research are presented, along with those in the synthesis of fibrous proteins and their applications. The book looks at microbial polyhydroxyalkanoates (PHAs), as well as natural and synthetic biopolymers in drug delivery and tissue engineering. It finishes with a chapter on the current state and applications of, and future trends in, biopolymers in regenerative medicine. * Offers a complete and thorough treatment of biopolymers from synthesis strategies and physiochemical properties to applications in industrial and medical biotechnology * Discusses the most attracted biopolymers with wide and specific applications * Takes a systematic approach to the field which allows readers to grasp and implement strategies for biomedical and biotechnological applications "Biopolymers for Biomedical and Biotechnological Applications" appeals to biotechnologists, bioengineers, and polymer chemists, as well as to those working in the biotechnological industry and institutes.
Download or read book Advanced Healthcare Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-05-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive and interdisciplinary view of cutting-edge research on advanced materials for healthcare technology and applications Advanced healthcare materials are attracting strong interest in fundamental as well as applied medical science and technology. This book summarizes the current state of knowledge in the field of advanced materials for functional therapeutics, point-of-care diagnostics, translational materials, and up-and-coming bioengineering devices. Advanced Healthcare Materials highlights the key features that enable the design of stimuli-responsive smart nanoparticles, novel biomaterials, and nano/micro devices for either diagnosis or therapy, or both, called theranostics. It also presents the latest advancements in healthcare materials and medical technology. The senior researchers from global knowledge centers have written topics including: State-of-the-art of biomaterials for human health Micro- and nanoparticles and their application in biosensors The role of immunoassays Stimuli-responsive smart nanoparticles Diagnosis and treatment of cancer Advanced materials for biomedical application and drug delivery Nanoparticles for diagnosis and/or treatment of Alzheimers disease Hierarchical modelling of elastic behavior of human dental tissue Biodegradable porous hydrogels Hydrogels in tissue engineering, drug delivery, and wound care Modified natural zeolites Supramolecular hydrogels based on cyclodextrin poly(pseudo)rotaxane Polyhydroxyalkanoate-based biomaterials Biomimetic molecularly imprinted polymers
Download or read book The Science and Applications of Synthetic and Systems Biology written by Institute of Medicine and published by National Academies Press. This book was released on 2011-12-30 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many potential applications of synthetic and systems biology are relevant to the challenges associated with the detection, surveillance, and responses to emerging and re-emerging infectious diseases. On March 14 and 15, 2011, the Institute of Medicine's (IOM's) Forum on Microbial Threats convened a public workshop in Washington, DC, to explore the current state of the science of synthetic biology, including its dependency on systems biology; discussed the different approaches that scientists are taking to engineer, or reengineer, biological systems; and discussed how the tools and approaches of synthetic and systems biology were being applied to mitigate the risks associated with emerging infectious diseases. The Science and Applications of Synthetic and Systems Biology is organized into sections as a topic-by-topic distillation of the presentations and discussions that took place at the workshop. Its purpose is to present information from relevant experience, to delineate a range of pivotal issues and their respective challenges, and to offer differing perspectives on the topic as discussed and described by the workshop participants. This report also includes a collection of individually authored papers and commentary.
Download or read book Antimicrobial Food Packaging written by Jorge Barros-Velazquez and published by Academic Press. This book was released on 2015-12-27 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antimicrobial Food Packaging takes an interdisciplinary approach to provide a complete and robust understanding of packaging from some of the most well-known international experts. This practical reference provides basic information and practical applications for the potential uses of various films in food packaging, describes the different types of microbial targets (fungal, bacteria, etc.), and focuses on the applicability of techniques to industry. Tactics on the monitoring of microbial activity that use antimicrobial packaging detection of food borne pathogens, the use of biosensors, and testing antimicrobial susceptibility are also included, along with food safety and good manufacturing practices. The book aims to curtail the development of microbiological contamination of food through anti-microbial packaging to improve the safety in the food supply chain. Presents the science behind anti-microbial packaging and films reflecting advancements in chemistry, microbiology, and food science Includes the most up-to-date information on regulatory aspects, consumer acceptance, research trends, cost analysis, risk analysis and quality control Discusses the uses of natural and unnatural compounds for food safety and defense
Download or read book Recent Development of Electrospinning for Drug Delivery written by Romána Zelkó and published by MDPI. This book was released on 2020-03-27 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several promising techniques have been developed to overcome the poor solubility and/or membrane permeability properties of new drug candidates, including different fiber formation methods. Electrospinning is one of the most commonly used spinning techniques for fiber formation, induced by the high voltage applied to the drug-loaded solution. With modifying the characteristics of the solution and the spinning parameters, the functionality-related properties of the formulated fibers can be finely tuned. The fiber properties (i.e., high specific surface area, porosity, and the possibility of controlling the crystalline–amorphous phase transitions of the loaded drugs) enable the improved rate and extent of solubility, causing a rapid onset of absorption. However, the enhanced molecular mobility of the amorphous drugs embedded into the fibers is also responsible for their physical–chemical instability. This Special Issue will address new developments in the area of electrospun nanofibers for drug delivery and wound healing applications, covering recent advantages and future directions in electrospun fiber formulations and scalability. Moreover, it serves to highlight and capture the contemporary progress in electrospinning techniques, with particular attention to the industrial feasibility of developing pharmaceutical dosage forms. All aspects of small molecule or biologics-loaded fibrous dosage forms, focusing on the processability, structures and functions, and stability issues, are included.
Download or read book Fundamentals of MALDI ToF MS Analysis written by Samira Hosseini and published by Springer. This book was released on 2016-08-18 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals and applications of Matrix Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-ToF-MS) technique. It highlights the basic principles, the history of invention as well as the mechanism of ionization and mass determination using this technique. It describes the fundamental principles and methods for MALDI spectra interpretation and determination of exact chemical structures from experimental data. This book guides the reader through the interpretation of MALDI data where complex macromolecular spectra are simplified in order to present the major principles behind data interpretation. In addition, each chapter describes how MALDI-ToF-MS analysis provides necessary understanding of the copolymer systems that have been designed for specialized biomedical applications.
Download or read book Polymeric Gels written by Kunal Pal and published by Woodhead Publishing. This book was released on 2018-06-15 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Gels: Characterization, Properties and Biomedical Applications covers the fundamentals and applications of polymeric gels. Particular emphasis is given to their synthesis, properties and characteristics, with topics such as natural, synthetic, and smart polymeric gels, medical applications, and advancements in conductive and magnetic gels presented. The book covers the basics and applications of hydrogels, providing readers with a comprehensive guide on the types of polymeric gels used in the field of biomedical engineering. Provides guidance for decisions on the suitability and appropriateness of a synthetic route and characterization technique for particular polymeric networks Analyzes and compares experimental data Presents in-depth information on the physical properties of polymeric gels using mathematical models Uses an interdisciplinary approach to discuss potential new applications for both established polymeric gels and recent advances
Download or read book Silk written by Pornanong Aramwit and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a general introduction to the use of the silkworm and its products for the textile industry and in the human body for the purposes of aiding healing and correcting deformities. In addition, this book provides a familiarity with the uses of silk materials in textile and biological applications and also the rational basis for these applications. It covers subjects such as silkworm silk fibre composites, silk materials in medicine and cellular immunological responses to silk materials.
Download or read book The Global Technology Revolution 2020 In Depth Analyses Bio Nano Materials Information Trends Drivers Barriers and Social Implications written by Richard Silberglitt and published by Rand Corporation. This book was released on 2002-08-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2020, areas of particular importance for technology trends will include biotechnology, nanotechnology, materials technology, and information technology. This report, the companion document to The Global Technology Revolution 2020, Executive Summary (Silberglitt et al., MG-475-NIC, 2006), assesses in detail a sample of 29 countries with respect to their ability to acquire and implement 16 key technology applications.
Download or read book Bio inspired Polymers written by Nico Bruns and published by Royal Society of Chemistry. This book was released on 2016-10-14 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many key aspects of life are based on naturally occurring polymers, such as polysaccharides, proteins and DNA. Unsurprisingly, their molecular functionalities, macromolecular structures and material properties are providing inspiration for designing new polymeric materials with specific functions, for example, responsive, adaptive and self-healing materials. Bio-inspired Polymers covers all aspects of the subject, ranging from the synthesis of novel polymers, to structure-property relationships, materials with advanced properties and applications of bio-inspired polymers in such diverse fields as drug delivery, tissue engineering, optical materials and lightweight structural materials. Written and edited by leading experts on the topic, the book provides a comprehensive review and essential graduate level text on bio-inspired polymers for biochemists, materials scientists and chemists working in both industry and academia.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Biomaterials written by David Byrom and published by Springer. This book was released on 1991-06-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials are produced from biological material and are used for their physical characteristics. This book looks at the range of biomaterials and their applications which range from the use of polysaccharides as thickening agents to the use of proteins as fibres and adhesives.
Download or read book Peptides and Proteins as Biomaterials for Tissue Regeneration and Repair written by Mario Barbosa and published by Woodhead Publishing. This book was released on 2017-09-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peptides and Proteins as Biomaterials for Tissue Regeneration and Repair highlights the various important considerations that go into biomaterial development, both in terms of fundamentals and applications. After covering a general introduction to protein and cell interactions with biomaterials, the book discusses proteins in biomaterials that mimic the extracellular matrix (ECM). The properties, fabrication and application of peptide biomaterials and protein-based biomaterials are discussed in addition to in vivo and in vitro studies. This book is a valuable resource for researchers, scientists and advanced students interested in biomaterials science, chemistry, molecular biology and nanotechnology. Presents an all-inclusive and authoritative coverage of the important role which protein and peptides play as biomaterials for tissue regeneration Explores protein and peptides from the fundamentals, to processing and applications Written by an international group of leading biomaterials researchers
