Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots
Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.
Download or read book Nitride Semiconductor Technology written by Fabrizio Roccaforte and published by John Wiley & Sons. This book was released on 2020-07-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Nitride Semiconductor Technology" provides an overview of nitride semiconductors and their uses in optoelectronics and power electronics devices. It explains the physical properties of those materials as well as their growth methods. Their applications in high electron mobility transistors, vertical power devices, LEDs, laser diodes, and vertical-cavity surface-emitting lasers are discussed in detail. The book further examines reliability issues in these materials and puts forward perspectives of integrating them with 2D materials for novel high-frequency and high-power devices. In summary, it covers nitride semiconductor technology from materials to devices and provides the basis for further research.
Download or read book Thermal Management of Gallium Nitride Electronics written by Marko Tadjer and published by Woodhead Publishing. This book was released on 2022-07-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Gallium Nitride Electronics outlines the technical approaches undertaken by leaders in the community, the challenges they have faced, and the resulting advances in the field. This book serves as a one-stop reference for compound semiconductor device researchers tasked with solving this engineering challenge for future material systems based on ultra-wide bandgap semiconductors. A number of perspectives are included, such as the growth methods of nanocrystalline diamond, the materials integration of polycrystalline diamond through wafer bonding, and the new physics of thermal transport across heterogeneous interfaces. Over the past 10 years, the book's authors have performed pioneering experiments in the integration of nanocrystalline diamond capping layers into the fabrication process of compound semiconductor devices. Significant research efforts of integrating diamond and GaN have been reported by a number of groups since then, thus resulting in active thermal management options that do not necessarily lead to performance derating to avoid self-heating during radio frequency or power switching operation of these devices. Self-heating refers to the increased channel temperature caused by increased energy transfer from electrons to the lattice at high power. This book chronicles those breakthroughs. - Includes the fundamentals of thermal management of wide-bandgap semiconductors, with historical context, a review of common heating issues, thermal transport physics, and characterization methods - Reviews the latest strategies to overcome heating issues through materials modeling, growth and device design strategies - Touches on emerging, real-world applications for thermal management strategies in power electronics
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Gallium Nitride GaN written by Farid Medjdoub and published by CRC Press. This book was released on 2017-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a Growing Need for High-Power and High-Frequency Transistors Gallium Nitride (GaN): Physics, Devices, and Technology offers a balanced perspective on the state of the art in gallium nitride technology. A semiconductor commonly used in bright light-emitting diodes, GaN can serve as a great alternative to existing devices used in microelectronics. It has a wide band gap and high electron mobility that gives it special properties for applications in optoelectronic, high-power, and high-frequency devices, and because of its high off-state breakdown strength combined with excellent on-state channel conductivity, GaN is an ideal candidate for switching power transistors. Explores Recent Progress in High-Frequency GaN Technology Written by a panel of academic and industry experts from around the globe, this book reviews the advantages of GaN-based material systems suitable for high-frequency, high-power applications. It provides an overview of the semiconductor environment, outlines the fundamental device physics of GaN, and describes GaN materials and device structures that are needed for the next stage of microelectronics and optoelectronics. The book details the development of radio frequency (RF) semiconductor devices and circuits, considers the current challenges that the industry now faces, and examines future trends. In addition, the authors: Propose a design in which multiple LED stacks can be connected in a series using interband tunnel junction (TJ) interconnects Examine GaN technology while in its early stages of high-volume deployment in commercial and military products Consider the potential use of both sunlight and hydrogen as promising and prominent energy sources for this technology Introduce two unique methods, PEC oxidation and vapor cooling condensation methods, for the deposition of high-quality oxide layers A single-source reference for students and professionals, Gallium Nitride (GaN): Physics, Devices, and Technology provides an overall assessment of the semiconductor environment, discusses the potential use of GaN-based technology for RF semiconductor devices, and highlights the current and emerging applications of GaN.
Download or read book Conference Proceedings of the 2023 3rd International Joint Conference on Energy Electrical and Power Engineering written by Cungang Hu and published by Springer Nature. This book was released on with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State of the Art Program on Compound Semiconductors 53 SOTAPOCS 53 written by M. E. Overberg and published by The Electrochemical Society. This book was released on 2011 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TMS 2015 144th Annual Meeting and Exhibition written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-02-26 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2015 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2015 Annual Meeting & Exhibition, held March 15-19 in Orlando, Florida, USA. The papers in this volume represent 33 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 73 symposia held at TMS2015. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented "as is." The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.
Download or read book TMS 2015 144th Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-20 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Semiconductor Devices written by Massimo Rudan and published by Springer Nature. This book was released on 2022-11-10 with total page 1680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook comprehensively covers the topic of semiconductor devices, embracing all aspects from theoretical background to fabrication, modeling, and applications. Nearly 100 leading scientists from industry and academia were selected to write the handbook's chapters, which were conceived for professionals and practitioners, material scientists, physicists and electrical engineers working at universities, industrial R&D, and manufacturers. Starting from the description of the relevant technological aspects and fabrication steps, the handbook proceeds with a section fully devoted to the main conventional semiconductor devices like, e.g., bipolar transistors and MOS capacitors and transistors, used in the production of the standard integrated circuits, and the corresponding physical models. In the subsequent chapters, the scaling issues of the semiconductor-device technology are addressed, followed by the description of novel concept-based semiconductor devices. The last section illustrates the numerical simulation methods ranging from the fabrication processes to the device performances. Each chapter is self-contained, and refers to related topics treated in other chapters when necessary, so that the reader interested in a specific subject can easily identify a personal reading path through the vast contents of the handbook.
Download or read book Nitride Wide Bandgap Semiconductor Material and Electronic Devices written by Yue Hao and published by CRC Press. This book was released on 2016-11-03 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces physical characteristics and implementations of III-nitride wide bandgap semiconductor materials and electronic devices, with an emphasis on high-electron-mobility transistors (HEMTs). The properties of nitride semiconductors make the material very suitable for electronic devices used in microwave power amplification, high-voltage switches, and high-speed digital integrated circuits.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HEMT Technology and Applications written by Trupti Ranjan Lenka and published by Springer Nature. This book was released on 2022-06-23 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers two broad domains: state-of-the-art research in GaN HEMT and Ga2O3 HEMT. Each technology covers materials system, band engineering, modeling and simulations, fabrication techniques, and emerging applications. The book presents basic operation principles of HEMT, types of HEMT structures, and semiconductor device physics to understand the device behavior. The book presents numerical modeling of the device and TCAD simulations for high-frequency and high-power applications. The chapters include device characteristics of HEMT including 2DEG density, Id-Vgs, Id-Vds, transconductance, linearity, and C-V. The book emphasizes the state-of-the-art fabrication techniques of HEMT and circuit design for various applications in low noise amplifier, oscillator, power electronics, and biosensor applications. The book focuses on HEMT applications to meet the ever-increasing demands of the industry, innovation in terms of materials, design, modeling, simulation, processes, and circuits. The book will be primarily helpful to undergraduate/postgraduate, researchers, and practitioners in their research.
Download or read book Handbook of GaN Semiconductor Materials and Devices written by Wengang (Wayne) Bi and published by CRC Press. This book was released on 2017-10-20 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses material growth, device fabrication, device application, and commercialization of energy-efficient white light-emitting diodes (LEDs), laser diodes, and power electronics devices. It begins with an overview on basics of semiconductor materials, physics, growth and characterization techniques, followed by detailed discussion of advantages, drawbacks, design issues, processing, applications, and key challenges for state of the art GaN-based devices. It includes state of the art material synthesis techniques with an overview on growth technologies for emerging bulk or free standing GaN and AlN substrates and their applications in electronics, detection, sensing, optoelectronics and photonics. Wengang (Wayne) Bi is Distinguished Chair Professor and Associate Dean in the College of Information and Electrical Engineering at Hebei University of Technology in Tianjin, China. Hao-chung (Henry) Kuo is Distinguished Professor and Associate Director of the Photonics Center at National Chiao-Tung University, Hsin-Tsu, Taiwan, China. Pei-Cheng Ku is an associate professor in the Department of Electrical Engineering & Computer Science at the University of Michigan, Ann Arbor, USA. Bo Shen is the Cheung Kong Professor at Peking University in China.
Download or read book Basic Properties of III V Devices Understanding Mysterious Trapping Phenomena written by Kompa, Günter and published by kassel university press GmbH. This book was released on 2014 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trapping effects in III-V devices pose a great challenge to any microwave device modeler. Understanding their physical origins is of prime importance to create physics-related reliable device models. The treatment of trapping phenomena is commonly beyond the classical higher-education level of communication engineers. This book provides any basic material needed to understand trapping effects occurring primarily in GaAs and GaN power HEMT devices. As the text material covers interdisciplinary topics such as crystal defects and localized charges, trap centers and trap dynamics, deep-level transient spectroscopy, and trap centers in passivation layers, the book will be of interest to graduate students of electrical engineering, communication engineering, and physics as well as materials, device, and circuit engineers in research and industry.
Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.
