Download or read book Experimental and Natural Rock Deformation Experimentelle und nat rliche Gesteinsverformung written by P. Paulitsch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since the last symposium on "Rock Deformation" was held in Los Angeles. The intervening period has seen striking advances in X-ray and experimental structural petrology. The Symposium of the Working Group on X-Ray and Experimental Structural Petrology, held at the invitation of the Deutsche Forschungsgemeinschaft on 17 and 18 February, 1969, in the Mineralogy Institute of the Technische Hochschule Darmstadt, was intended to display the progress made in this field. A meeting on the same had been held in 1968 at the Mineralogy Institute of the Technische Hochschule Aachen. The outcome of many years of effort has been the development of new, automated in struments for the X-ray processing of specimens. The X-ray and optical data so obtained are processed by computer to give complete texture diagrams; it is also possible to rotate the coordinates, and to make an indirect determination of data which have not been measured. In experimental structural petrology, the temperature and pressure dependence of the translational system has been studied in minerals from various types of rock formation which had not previously been investigated, and deductions were made concerning certain mineral parageneses. The original contributions on field findings were conceived and executed so as to point up the possible links with experimental work on structural petrology. They determine for a given mineral facies the pressure and temperature ranges to be applied in experimen tal studies of deformation in single crystals and in rocks.
Download or read book Kompakt W rterbuch KFZ Technik written by Ingo Stüben and published by expert verlag GmbH. This book was released on 2022-10-17 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Wörterbuch dient zur Erleichterung der Arbeit für den Personenkreis, der mit englischen bzw. deutschen Fachausdrücken aus dem Bereich der KFZ-Technik konfrontiert wird. Falls nötig, werden zu den einzelnen Begriffen Hintergrundinformationen, Beispiele sowie umgangssprachliche Hinweise geliefert. Als zusätzliche Informationsebene sind nach Gruppen aufgeteilte schematische Darstellungen integriert, womit die Terminologie typischer Systeme erfasst und visualisiert ist. Bei dem vorliegenden Nachschlagewerk mit seinen circa 40.000 Stichworteintragungen handelt es sich nicht um ein Wörterbuch im üblichen Sinne, sondern um ein weit darüberhinausgehendes lexikonähnliches Fachwörterbuch. The purpose of this dictionary is to facilitate the work of persons who are confronted with English or German technical terms from the field of automotive engineering. In cases where it is necessary, background information, examples and colloquial references are provided for the individual terms. Additionally, this book includes information on schematic representations and divides them into groups, which means that it covers and visualizes terminology of typical systems. This reference work, with its approximately 40,000 keyword entries, is not a dictionary in the usual sense, but rather a technical dictionary that goes far beyond the scope of a lexicon.
Download or read book Routledge German Dictionary of Chemistry and Chemical Technology Worterbuch Chemie und Chemische Technik written by Gross and published by Routledge. This book was released on 2014-06-17 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary consists of some 63,000 terms and over 100,000 translations drawn from all of the main areas of chemistry and chemical technology.
Download or read book Routledge German Dictionary of Chemistry and Chemical Technology Worterbuch Chemie und Chemische Technik written by Technische Universitat Dreden and published by Routledge. This book was released on 2014-06-17 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both volumes of this dictionary consists of some 63,000 and over 100,000 translations from all the main areas of chemistry and chemical technology including: Analytical Chemistry, Biochemistry, Biotechnology, Chromatography, Colour, Inorganic Chemistry, Laboratory techniques, Metallurgy & Treatment, Organic chemistry, Physical chemistry, Plastics, Process engineering, Spectroscopy and Industrial Chemistry.
Download or read book Preferred Orientation in Deformed Metal and Rocks written by Hans Rudolf Wenk and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the texture analysis of deformed materials and explores methods of determining and interpreting the preferred orientation of crystals in deformed polycrystalline aggregates.**The book reviews: 1) the techniques, procedures, and theoretical basis for the accumulation and analysis of orientation data; 2)the processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation; 3) the textures in specific systems and application of principles to the solution of specific problems.**With a combination of metallurgic and geologic applications, Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis will be an important source book for students and researchers in materials science, solid state physics, structural geology, and geophysics.**FROM THE PREFACE: Determination and interpretation of the preferred orientation of crystals in deformed polycrystalline aggregates (in this volume also referred to as texture) has been of longstanding concern to both materials scientists and geologists. A similar theoretical background--such as the dislocation theory of crystal plasticity--has been the basis of understanding flow in metals and rocks; and similar determinative techniques--including microscopy and x-ray diffraction--have been used to study textures and microstructures. Whereas many of the fundamental principles have been established early this century by scientists such as Jeffery, Sachs, Sander, Schmid, Schmidt, and Taylor, only in recent years has knowledge reached a level that provides a quantitative framework which has replaced a largely phenomenological approach. This is expressed in the sudden new emphasis on textural studies, as documented by the large number of recent publications.**This volume contains material to serve as an introduction for those who wish to enter this field as well as reviews for those who are already engaged in advanced research....**The book is divided into three parts. The first (Chapters 2*b17) deals with techniques, procedures, and theoretical bases for the accumulation and analysis of orientation data. The second (Chapters 8*b112) introduces processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation. All those chapters emphasize basic principles and apply to metals as well as to minerals. The third part (Chapters 13*b126) illustrates textures in specific systems and the application of the principles set out in the earlier chapters to the solution of specific problems. Readers of these chapters will quickly become aware that metals have been more exhaustively studied than minerals; but they will also realize that, because of their structural symmetry, metals are in general much simpler than rocks and that the intepretation of metal textures is less involved. An extensive list of relevant references provides access to much of the original literature on textures....
Download or read book Diccionario del tren written by Mario León and published by Ediciones Díaz de Santos. This book was released on 1999 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Symposium on Macromolecular Chemistry written by and published by . This book was released on 1957 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Processes in Polycrystalline Aggregates of Gypsum written by Siese de Meer and published by . This book was released on 1995 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constitutive modeling of amorphous thermoplastic polymers with special emphasis on manufacturing processes written by Hempel, Philipp and published by KIT Scientific Publishing. This book was released on 2016-10-26 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the development of constitutive models for the mechanical behavior of amorphous thermoplastic polymers at large strains. A special emphasis lies on the temperature dependency so that the altered material behavior at high temperatures can be considered. To implement the developed constitutive models the software tool AceGen is used by which program code is generated and optimized as well as derivatives are calculated automatically.
Download or read book Main and Section Lectures Presented at the International Symposium on Macromolecular Chemistry Held Under the Auspices of the International Union of Pure and Applied Chemistry written by and published by . This book was released on 1957 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Berichte written by and published by CRC Press. This book was released on 1991 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by David E. Laughlin and published by Newnes. This book was released on 2014-07-24 with total page 2963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the highly regarded family of titles that first published in 1965 is now a three-volume set and over 3,000 pages. All chapters have been revised and expanded, either by the fourth edition authors alone or jointly with new co-authors. Chapters have been added on the physical metallurgy of light alloys, the physical metallurgy of titanium alloys, atom probe field ion microscopy, computational metallurgy, and orientational imaging microscopy. The books incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included. - Exhaustively synthesizes the pertinent, contemporary developments within physical metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single, complete solution - Enables metallurgists to predict changes and create novel alloys and processes
Download or read book Encyclopedia of physics written by Siegfried Flügge and published by . This book was released on 1956 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Modeling and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2022-05-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.
Download or read book Dokumentation Rheologie written by and published by . This book was released on 1986 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbuch der Physik written by Siegfried Flügge and published by . This book was released on 1973 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials written by Alon Gany and published by Springer Nature. This book was released on 2022-05-16 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected papers presented at the 2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials. It discusses the latest progress in the field of advance carbon nanomaterials in energetic materials; including the structural design, theoretical calculation, synthesis, properties, and applications of carbon materials. It also presents the new technology and applications of advanced carbon nanomaterials in energetic materials. It can be used as a reference book for researchers in energetic materials and related fields. It is also be useful for undergraduates and postgraduates studying these topics.
