Download or read book Deformation Processing and Structure written by George Krauss and published by ASM International(OH). This book was released on 1984 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material’s performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this. The deformation and processing of structural materials is divided into eight chapters, each one exploring a material’s processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials. The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. Contains research on the preformance of materials Valuable resource for researchers in mechanical, civil and structural engineering Comprehensive coverage to the deformation and processing of all types of structural materials

Download or read book Deformation Processing written by Walter A. Backofen and published by . This book was released on 1972 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Deformation Processing and Structure written by ASM Materials Science Seminar Staff and published by . This book was released on with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Deformation Processing written by F. W. Boulger and published by . This book was released on 1967 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. The report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Ductile Fracture; Application of High Pressure to the Forming of Brittle Metals; Superplasticity; Lubrication in Metal-Deformation Processes; Swaging; Adiabatic Conditions in Deformation Processing; Residual Stresses produced by Deformation. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Download or read book Advances in Deformation Processing written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has con ducted the Sagamore Army Materials Research Conference in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University since 1954. The purpose of the conference has been to gather to gether scientists and engineers from academic institutions, in dustry and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. This volume, Advances in Deformation Processing, addresses the areas of Analytical Advances, Workability, Processing to Optimize Properties, Advanced Applications - Materials, and Advanced Applications - Processes. The dedicated assistance of Mr. Joseph Bernier of the Army Materials and Mechanics Research Center throughout the stages of the conference planning and finally the publication of the Sagamore Conference Proceedings is deeply appreciated. The support of Helen Brown DeMascio of Syracuse University in p- paring the final manuscript is acknowledged. The continued active interest and support of these conferences by Dr. A. E. Gorum, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii Contents SESSION I INTRODUCTION A. E. Gorum, Moderator Continuum Mechanics and Deformation Processing 1.

Download or read book Processing Structure Property Relationships in Metals written by Alessandra Varone and published by MDPI. This book was released on 2019-11-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the industrial manufacturing of metals, the achievement of products featuring desired characteristics always requires the control of process parameters in order to obtain a suitable microstructure. The strict relationship among process parameters, microstructure, and mechanical properties is a matter of interest in different areas, such as foundry, plastic forming, sintering, welding, etc., and regards both well-established and innovative processes. Nowadays, circular economy and sustainable technological development are dominant paradigms and impose an optimized use of resources, a lower energetic impact of industrial processes and new tasks for materials and products. In this frame, this Special Issue covers a broad range of research works and contains research and review papers.

Download or read book Deformation Structures and Processes within the Continental Crust written by S. Llana-Fúnez and published by Geological Society of London. This book was released on 2014-06-04 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of papers showing the current focus of studies of deformation structures and processes within the continental crust. The selected contributions use a large range of analytical techniques suited to the full range of structure sizes and fine-tuned to the physical process that controls the deformation, from the grain boundary at the micro-scale, the lithological contact at the meso-scale to the plate boundary at the global scale. The papers in the volume are grouped into three sections relating to specific lines of research within the analysis of rock deformation structures and processes, in particular in respect to the continental crust: structures within shear zones and faults; magmatic structures, and microstructures and rheology. These sections include papers describing field studies, experimental rock deformation and numerical modelling of deformation processes.

Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.

Download or read book Fundamentals of Deformation Processing written by and published by . This book was released on 1964 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.

Download or read book Severe Plastic Deformation written by Ghader Faraji and published by Elsevier. This book was released on 2018-07-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe Plastic Deformation: Methods, Processing and Properties examines all severe plastic deformation techniques developed over the past two decades, exploring the appropriate severe plastic deformation method for a particular case. The book offers an overview of these methods, introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples, reviews effective parameters to make a severe plastic deformation method better, from property (mechanical) and processing (cost, time, load, etc.) viewpoints, discusses mechanical, physical and chemical properties of UFG and NS metals, and concludes with various applications for these methods. Over the last several decades, a large number of severe plastic deformation methods have been developed for processing a wide array of metals for superior properties, making this a timely resource. Collects all severe plastic deformation methods in a unique reference Compares severe plastic deformation methods from several viewpoints, including processing and final property Classifies severe plastic deformation methods based on the sample shape and mechanics, as well as the properties achieved in the processed metal Introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples

Download or read book The Role of the Polymeric Matrix in the Processing and Structural Properties of Composite Materials written by James Seferis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state of development of composite materials is quite unique in the scientific world with simultaneous advances being made both in their usage and basic understanding. The complexity and high technology required in manufacturing structural parts with these materials as well as the need for fundamental description of their processing and property characteristics necessitates a close col laboration between industrial and academic researchers. This col laboration has become significant not only in solving specific tech nical problems, but in providing a much needed supply of scientists with training and background focused on anticipated demand for further advances in composite usage. The fact that the transportation industry with its current international character has a vital interest in composite materials for weight savings applications has provided a strong incentive for extending these developments beyond national boundaries. An excel lent example of an established international venture is the building of the new generation commercial aircraft by the Boeing Company with composite parts manufactured by Aerita1ia in Italy. Accordingly, we organized a Joint U. S. -Italy Symposium on Composite Materials in Italy which was successfully held on June 15-19, 1981, under the primary sponsorship of NSF in the U. S. A. and CNR in Italy. The strong support we also received from industrial co-sponsors, both from Italy and the U. S. A. , as well as our respective academic insti tutions gave us confidence that we were addressing a timely and important area in Science and Engineering with a unique concept.

Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.

Download or read book The Application of High Pressure in Metal deformation Processing written by F. W. Boulger and published by . This book was released on 1964 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 3, 1963, a symposium was sponsored by the Bureau of Naval Weapons, Metalworking Processes and Equipment Program, on the application of high pressure in metal-deformation processing. Past research has shown that superimposed hydrostatic pressure can significantly increase the ductility at fracture of various materials. These observations have stimulated considerable interest in applying this hydrostatic-pressure effect to metal deformation processing, where it was anticipated that improved ductility and fabricability of brittle materials could be realized. Hydrostatic extrusion and hydrodynamic compressive forging were two such fabrication techniques discussed at the symposium, and preliminary results were found to be encouraging. Another fabrication process that will be investigated in the near future is sheet drawing, where the effect of superimposed pressure improves the ductility to fracture, it was noted that pressure cycling did not improve either the strength or ductility of steels containing various amounts of carbon. In addition to the mechanical-property effects, hydrostatic pressure has been found to affect measurably, numerous metallurgical properties of metals and alloys. (Author).

Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes. The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher. The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.