Download or read book Deformation Characteristics in 6H silicon Carbide written by Dezhou Zhang and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Mechanisms in 6H Silicon Carbide written by Ka-Ho Pang and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Properties of Silicon Carbide written by Gary Lynn Harris and published by IET. This book was released on 1995 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well structured and fully indexed book helps to understand and fully characterize the SiC system.
Download or read book Silicon Carbide Microsystems for Harsh Environments written by Muthu Wijesundara and published by Springer Science & Business Media. This book was released on 2011-05-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods towards system level integration of components and key challenges are evaluated and discussed based on the current state of SiC materials processing and device technology. Issues such as temperature mismatch, process compatibility and temperature stability of individual components and how these issues manifest when building the system receive thorough investigation. The material covered not only reviews the state-of-the-art MEMS devices, provides a framework for the joining of electronics and MEMS along with packaging into usable harsh-environment-ready sensor modules.
Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.
Download or read book Constrained Deformation of Materials written by Y.-L. Shen and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Constrained Deformation of Materials: Devices, Heterogeneous Structures and Thermo-Mechanical Modeling" is an in-depth look at the mechanical analyses and modeling of advanced small-scale structures and heterogeneous material systems. Mechanical deformations in thin films and miniaturized materials, commonly found in microelectronic devices and packages, MEMS, nanostructures and composite and multi-phase materials, are heavily influenced by the external or internal physical confinement. A continuum mechanics-based approach is used, together with discussions on micro-mechanisms, to treat the subject in a systematic manner under the unified theme. Readers will find valuable information on the proper application of thermo-mechanics in numerical modeling as well as in the interpretation and prediction of physical material behavior, along with many case studies. Additionally, particular attention is paid to practical engineering relevance. Thus real-life reliability issues are discussed in detail to serve the needs of researchers and engineers alike.
Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.
Download or read book Dynamic Behavior of Materials Volume 1 written by Dan Casem and published by Springer. This book was released on 2016-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior
Download or read book Silicon Carbide written by Wolfgang J. Choyke and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1997 publication of "Silicon Carbide - A Review of Fundamental Questions and Applications to Current Device Technology" edited by Choyke, et al., there has been impressive progress in both the fundamental and developmental aspects of the SiC field. So there is a growing need to update the scientific community on the important events in research and development since then. The editors have again gathered an outstanding team of the world's leading SiC researchers and design engineers to write on the most recent developments in SiC.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Dynamic Deformation of Silicon Carbide written by Chienchung James Shih and published by . This book was released on 1998 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Ceramics and Composites written by Roy W. Rice and published by CRC Press. This book was released on 2000-04-18 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review, evaluation, and summary of the dependence of mechanical properties on grain and particle parameters of monolithic ceramics and ceramic composites. Emphasizing the critical link between fabrication and ceramic performance, the book covers the grain dependence of monolithic properties and the dependence of ceramic, composite properties on grain and particulate parameters. It includes theoretical and conceptual background, pertinent models, experimental results, a data review, discussion, and a summary or recommendations. Illustrations feature microstructural details while graphs plot data on material hardness, compressive strength, and other pivotal variables.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1983 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide Nanostructures written by Jiyang Fan and published by Springer. This book was released on 2014-07-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the most up-to-date information on the fabrication techniques, properties, and potential applications of low dimensional silicon carbide (SiC) nanostructures such as nanocrystallites, nanowires, nanotubes, and nanostructured films. It also summarizes the tremendous achievements acquired during the past three decades involving structural, electronic, and optical properties of bulk silicon carbide crystals. SiC nanostructures exhibit a range of fascinating and industrially important properties, such as diverse polytypes, stability of interband and defect-related green to blue luminescence, inertness to chemical surroundings, and good biocompatibility. These properties have generated an increasing interest in the materials, which have great potential in a variety of applications across the fields of nanoelectronics, optoelectronics, electron field emission, sensing, quantum information, energy conversion and storage, biomedical engineering, and medicine. SiC is also a most promising substitute for silicon in high power, high temperature, and high frequency microelectronic devices. Recent breakthrough pertaining to the synthesis of ultra-high quality SiC single-crystals will bring the materials closer to real applications. Silicon Carbide Nanostructures: Fabrication, Structure, and Properties provides a unique reference book for researchers and graduate students in this emerging field. It is intended for materials scientists, physicists, chemists, and engineers in microelectronics, optoelectronics, and biomedical engineering.
Download or read book Metal Matrix Composites A Modern Approach to Manufacturing written by Virat Khanna, Prianka Sharma, Santosh Kumar and published by Bentham Science Publishers. This book was released on 2024-03-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of metal matrix composite manufacturing, including fabrication methods, characterization techniques, and manufacturing applications. 10 chapters cover fundamental and applied topics on matrix metal composites. The book is a resource for all readers seeking to gain an in-depth understanding of metal matrix composites with its relevance to the modern industry. Key Features - Includes fully referenced contributions by experts in materials science - Provides an introduction to the subject, and a future prospective for a broad range of readers - Reviews current knowledge on fabrication techniques and structure property relationships of metal matrix composites - Includes dedicated chapters for reinforced composites (carbon fiber, carbon nanotubes, aluminium) - Includes guidance on material wear and tear and - Provides an investigation for process optimization for EDM for newly developed composites It is designed to be an essential resource for students and professionals in the field of materials science and engineering, as well as researchers and engineers working on metal matrix composite in manufacturing industries.
