Download or read book Deformation and Fracture Properties of the Soft Magnetic Composite Somaloy 700 3P on Different Length Scales written by Schwark, Tabea Gisela and published by KIT Scientific Publishing. This book was released on 2018-07-09 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Impact of Recycling on the Fibre and the Composite Properties of Carbon Fibre Reinforced Plastics written by Hüther, Jonas Johannes and published by KIT Scientific Publishing. This book was released on 2020-06-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterisation and Modelling of Continuous Discontinuous Sheet Moulding Compound Composites for Structural Applications written by Trauth, Anna and published by KIT Scientific Publishing. This book was released on 2020-12-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this work is to significantly deepen the understanding of the material and the structural behaviour of continuous-discontinuous SMC composites, following a holistic approach to investigate microscopic aspects, macroscopic mechanical behaviour as well as failure evolution at the coupon, structure and component level. In addition, criteria to evaluate the effect of hybridisation are introduced and modelling approaches are presented and discussed.

Download or read book Modeling transport properties and electrochemical performance of hierarchically structured lithium ion battery cathodes using resistor networks and mathematical half cell models written by Birkholz, Oleg and published by KIT Scientific Publishing. This book was released on 2022-10-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchically structured active materials in electrodes of lithium-ion cells are promising candidates for increasing gravimetric energy density and improving rate capability of the system. To investigate the influence of cathode structures on the performance of the whole cell, efficient tools for calculating effective transport properties of granular systems are developed and their influence on the electrochemical performance is investigated in specially adapted cell models.

Download or read book Multiscale Modeling of Curing and Crack Propagation in Fiber Reinforced Thermosets written by Schöller, Lukas and published by KIT Scientific Publishing. This book was released on 2024-03-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the production of fiber-reinforced thermosets, the resin material undergoes a reaction that can lead to damage. A two-stage polymerization reaction is modeled using molecular dynamics and evaluations of the system including a fiber surface are performed. In addition, a phase-field model for crack propagation in heterogeneous systems is derived. This model is able to predict crack growth where established models fail. Finally, the model is used to predict crack formation during curing.

Download or read book Application of Data Mining and Machine Learning Methods to Industrial Heat Treatment Processes for Hardness Prediction written by Lingelbach, Yannick and published by KIT Scientific Publishing. This book was released on 2024-07-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a data mining framework applied to industrial heattreatment (bainitization and case hardening) aiming to optimize processes and reduce costs. The framework analyses factors such as material, production line, and quality assessment for preprocessing, feature extraction, and drift corrections. Machine learning is employed to devise robust prediction strategies for hardness. Its implementation in an industry pilot demonstrates the economic benefits of the framework. - This work presents a data mining framework applied to industrial heattreatment (bainitization and case hardening) aiming to optimize processes and reduce costs. The framework analyses factors such as material, production line, and quality assessment for preprocessing, feature extraction, and drift corrections. Machine learning is employed to devise robust prediction strategies for hardness. Its implementation in an industry pilot demonstrates the economic benefits of the framework.

Download or read book Consequences of hydroxyl generation by the silica water reaction Part I Diffusion and Swelling written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effectson diffusion behaviour and mechanical properties. Water added to silica glass increases its specific volume so that the silica expands near the surface. Mechanical boundary conditions give rise for compressive “swelling stresses”. This fact provides a tool for the interpretation of many experimental observations from literature.

Download or read book Consequences of hydroxyl generation by the silica water reaction Part II Global and local Swelling Part III Damage and Young s Modulus written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effects on diffusion behaviour and mechanical properties. In a preceding booklet, we focused on diffusion and fiber strengths and deformations which were obtained by water soaking under external loading. In the present booklet we deal with results and interpretations of strength increase in the absence of applied stresses.

Download or read book Structure evolution in tribological interfaces studied by multilayer model alloys written by Cihan, Ebru and published by KIT Scientific Publishing. This book was released on 2020-10-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies of deformation mechanisms of metals and alloys pioneer the better investigation of the friction and wear behavior of materials with well-defined initial microstructures. Within this scope, in this work, the effect of sub-surface deformations on the resulting friction and wear behavior has been searched by means of a systematic experimental study on Au-Ni metallic multilayer model alloy system.

Download or read book Phase field Modeling of Phase Changes and Mechanical Stresses in Electrode Particles of Secondary Batteries written by Zhang, Tao and published by KIT Scientific Publishing. This book was released on 2021-09-27 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most storage materials exhibit phase changes, which cause stresses and, thus, lead to damage of the electrode particles. In this work, a phase-field model for the cathode material NaxFePO4 of Na-ion batteries is studied to understand phase changes and stress evolution. Furthermore, we study the particle size and SOC dependent miscibility gap of the nanoscale insertion materials. Finally, we introduce the nonlocal species concentration theory, and show how the nonlocality influences the results.

Download or read book Dynamic Model based Analysis of Oxygen Reduction Reaction in Gas Diffusion Electrodes written by Röhe, Maximilian and published by KIT Scientific Publishing. This book was released on 2024-01-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the first simulation model of oxygen depolarized cathodes (ODC), which are silver catalyst-based gas diffusion electrodes, is presented that considers the phase equilibrium of the gas-liquid interface and structure-related inhomogeneities in electrolyte distribution. By means of the model it has been identified that mass transport of water and ions in the liquid phase is a crucial factor for electrode performance and how it is influenced by the electrode structure.

Download or read book Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics written by Mazzocchi, Francesco and published by KIT Scientific Publishing. This book was released on 2022-07-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aimed at designing, studying and producing the first prototypes of KIDs tailored for fusion plasma polarimetric diagnostics. Diamond was considered for the first time as substrate material for low-temperature superconducting detectors given its unmatched optical, radiation hardness and thermal qualities, properties necessary for working environments potentially saturated with radiation. This work represents a first step toward the optimization and final application of this technology.

Download or read book On the Electro Chemo Mechanical Coupling in Solid State Batteries and its Impact on Morphological Interface Stability written by Ganser, Markus and published by KIT Scientific Publishing. This book was released on 2021-03-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state batteries with a lithium metal electrode are considered the next generation of high energy battery technology. Unfortunately, lithium metal is prone to harmful protrusion or dendrite growth which causes dangerous cell failure. Within this work the problem of protrusion growth is tackled by deriving a novel electro-chemo-mechanical theory tailored for binary solid state batteries which is then used to discuss the impact of mechanics on interface stability by numerical studies.

Download or read book Sintering From Empirical Observations to Scientific Principles written by Randall German and published by Butterworth-Heinemann. This book was released on 2014-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As sintering applications march toward a $30 billion global business, the models for sintering have progressed, but generally follow behind observation. Documentation of the steps needed to build to a quantitative and predictive theory are often missed. Sintering: From Empirical Observations to Scientific Principles partitions sintering applications and observations to show critical turning points required to establish modern sintering as a predictive science. This book, written by the most cited author in his field, is laced with people, organizations, critical steps, and important formulations in a mixture of history, personalities, and applications. Exploring how insights in seemingly unrelated fields sparked progress, it is also a teaching tool to show where there is success, where there are problems, and how to organize teams to leapfrog to new applications or plateaus of use. Randall German's Sintering: From Empirical Observations to Scientific Principles is a platform for directly addressing the critical control parameters in these new research and development efforts. Shows how the theories and understanding of sintering were developed and improved over time, and how different products were developed, ultimately leading to important knowledge and lessons for solving real sintering problems Covers all the necessary infrastructure of sintering theory and practice, such as atomic theory, surface energy, microstructure, and measurement and observation tools Introduces the history and development of such early sintered products as porcelain, tungsten lamp filaments, bronze bearings, steel automotive components, platinum crucibles and more

Download or read book Liquid Phase Sintering written by R.M. German and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Powder Metallurgy Diamond Tools written by Janusz Konstanty and published by Elsevier. This book was released on 2011-04-18 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy Diamond Tools is the first book of its kind to cover the role of powder metallurgy in the production of diamond-impregnated tool components. Providing essential information on modelling, design, composition, fabrication, performance, wear and applications, this book is ideal for manufacturers, tool designers, end-users, metallurgists, R&D departments, specifiers and consultants. Diamond-impregnated tools are used increasingly in industries where wear-resistant drills or cutting tools are required. The cobalt matrix in which the diamond is embedded is manufactured by pressing and sintering, techniques commonly used in powder metallurgy, but the process is complex and intricate. This book provides a comprehensive account of all you need to know about the role of powder metallurgy in the production of diamond-impregnated tools, giving metal powder manufacturers a better understanding of the requirements of diamond tool producers and end users, leading to the development of superior products. This book will...1. Clarify the science and properties involved in powder metallurgy and the production of diamond tools2. Explain the manufacturing process3. Help improve your machining and finishing techniques, leading to better results4. Optimise your tool use and wear, helping you to save time and money5. Help you to consider new applications, optimising your equipment and resources Author is a leading authority on diamond tools and has published extensively on the subject A comprehensive account of all you need to know about the role of powder metallurgy in the production of diamond-impregnated tool components An important reference for manufacturers of powdered diamond and cobalt for the tool industry, tool designers and manufacturers, users of diamond-impregnated tools, metallurgists, designers, R&D Departments, specifiers and consultants