Download or read book Defense Modeling Simulation and Analysis written by National Research Council and published by National Academies Press. This book was released on 2006-09-22 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, simulation, and analysis (MS&A) is a crucial tool for military affairs. MS&A is one of the announced pillars of a strategy for transforming the U.S. military. Yet changes in the enterprise of MS&A have not kept pace with the new demands arising from rapid changes in DOD processes and missions or with the rapid changes in the technology available to meet those demands. To help address those concerns, DOD asked the NRC to identify shortcomings in current practice of MS&A and suggest where and how they should be resolved. This report provides an assessment of the changing mission of DOD and environment in which it must operate, an identification of high-level opportunities for MS&A research to address the expanded mission, approaches for improving the interface between MS&A practitioners and decision makers, a discussion of training and continuing education of MS&A practitioners, and an examination of the need for coordinated military science research to support MS&A.
Download or read book Analysis Analysis Practices and Implications for Modeling and Simulation written by Paul K. Davis and published by Rand Corporation. This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of analysis and analysis practices for defense planning, the paper1s purpose is to delineate priorities for the way ahead, i.e., for investments and other actions to ensure that future models and simulations will serve the needs of decisionmakers. The analysis in question is accomplished for Quadrennial Reviews and for continuing work on capability assessments, requirements analysis, and program analysis.
Download or read book Systems Analysis and Modeling in Defense written by R. Huber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of an interna tional symposium devoted to Modeling and Analysis of Defense Processes in the context of land/air warfare. It was sponsored by Panel VII (on Defense Applications of Operational Research) of NATO's Defense Research Group (DRG) and took place 27-29 July 1982 at NATO headquarters in Brussels. Except perhaps for the Theater-Level Gaming and Analysis Workshop, sponsored by the Office of united 1 states Naval Research in 1977 , this symposium was the first international scientific meeting on Operations Research/Systems Analysis in the area of land/air war fare since the conference on Modeling Land Battle Systems 2 for Military Planning sponsored by NATO's Special Pro gramme Panel on Systems Science in 1974. That conference dealt primarily with modeling small unit (company, bat talion) engagements and, to a lesser extent, large unit (corps, theater) campaigns with principal emphasis on attrition processes and movement in combat. It was considered as rather successful in that it revealed the state-of-the art around 1972 and identified problem areas and promising approaches for future developments. lWith regard to foreign attendance, this wo- shop was largely limited to participants from the United Kingdom and the Federal Republic of Germany (see L.J. Low: Theater-Level Gaming and Analysis Workshop for Force Planning, Vol II-Summary, Discus sion of Issues and Requirements for Research, SRI Report, May, 1981).
Download or read book Defense Modeling Simulation and Analysis written by National Research Council and published by National Academies Press. This book was released on 2006-10-22 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, simulation, and analysis (MS&A) is a crucial tool for military affairs. MS&A is one of the announced pillars of a strategy for transforming the U.S. military. Yet changes in the enterprise of MS&A have not kept pace with the new demands arising from rapid changes in DOD processes and missions or with the rapid changes in the technology available to meet those demands. To help address those concerns, DOD asked the NRC to identify shortcomings in current practice of MS&A and suggest where and how they should be resolved. This report provides an assessment of the changing mission of DOD and environment in which it must operate, an identification of high-level opportunities for MS&A research to address the expanded mission, approaches for improving the interface between MS&A practitioners and decision makers, a discussion of training and continuing education of MS&A practitioners, and an examination of the need for coordinated military science research to support MS&A.
Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-08-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book Simulation and Wargaming written by Charles Turnitsa and published by John Wiley & Sons. This book was released on 2022-02-15 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the potential synergies between computer simulation and wargaming Based on the insights of experts in both domains, Simulation and Wargaming comprehensively explores the intersection between computer simulation and wargaming. This book shows how the practice of wargaming can be augmented and provide more detail-oriented insights using computer simulation, particularly as the complexity of military operations and the need for computational decision aids increases. The distinguished authors have hit upon two practical areas that have tremendous applications to share with one another but do not seem to be aware of that fact. The book includes insights into: The application of the data-driven speed inherent to computer simulation to wargames The application of the insight and analysis gained from wargames to computer simulation The areas of concern raised by the combination of these two disparate yet related fields New research and application opportunities emerging from the intersection Addressing professionals in the wargaming, modeling, and simulation industries, as well as decision makers and organizational leaders involved with wargaming and simulation, Simulation and Wargaming offers a multifaceted and insightful read and provides the foundation for future interdisciplinary progress in both domains.
Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.
Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).
Download or read book Modeling Simulation and Operations Analysis in Afghanistan and Iraq written by Ben Connable and published by . This book was released on 2014 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: RAND conducted a lessons learned examination of operations analysis, modeling, and simulation in support of Operation Enduring Freedom and Operation Iraqi Freedom. This report identifies ways in which analysts have attempted to support commanders' decisions in counterinsurgency and irregular warfare, describes many of the models and tools they employed, provides insight into the challenges they faced, and suggests ways in which the application of modeling, simulation, and analysis might be improved for current and future operations. RAND identified four broad categories of decisions: force protection, logistics, campaign assessment, and force structuring. Modeling, simulation, and analysis were most effective in supporting force protection and logistics decisions, and least effective in supporting campaign assessment and force structuring.
Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book The Military Applications of Modeling written by and published by . This book was released on 1984 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1999-08-17 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Panel on Statistical Methods for Testing and Evaluating Defense Systems had a broad mandate-to examine the use of statistics in conjunction with defense testing. This involved examining methods for software testing, reliability test planning and estimation, validation of modeling and simulation, and use of modem techniques for experimental design. Given the breadth of these areas, including the great variety of applications and special issues that arise, making a contribution in each of these areas required that the Panel's work and recommendations be at a relatively general level. However, a variety of more specific research issues were either brought to the Panel's attention by members of the test and acquisition community, e.g., what was referred to as Dubin's challenge (addressed in the Panel's interim report), or were identified by members of the panel. In many of these cases the panel thought that a more in-depth analysis or a more detailed application of suggestions or recommendations made by the Panel would either be useful as input to its deliberations or could be used to help communicate more individual views of members of the Panel to the defense test community. This resulted in several research efforts. Given various criteria, especially immediate relevance to the test and acquisition community, the Panel has decided to make available three technical or background papers, each authored by a Panel member jointly with a colleague. These papers are individual contributions and are not a consensus product of the Panel; however, the Panel has drawn from these papers in preparation of its final report: Statistics, Testing, and Defense Acquisition. The Panel has found each of these papers to be extremely useful and they are strongly recommended to readers of the Panel's final report.
Download or read book Modeling and Simulation Support for System of Systems Engineering Applications written by Larry B. Rainey and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: “...a much-needed handbook with contributions from well-chosen practitioners. A primary accomplishment is to provide guidance for those involved in modeling and simulation in support of Systems of Systems development, more particularly guidance that draws on well-conceived academic research to define concepts and terms, that identifies primary challenges for developers, and that suggests fruitful approaches grounded in theory and successful examples.” Paul Davis, The RAND Corporation Modeling and Simulation Support for System of Systems Engineering Applications provides a comprehensive overview of the underlying theory, methods, and solutions in modeling and simulation support for system of systems engineering. Highlighting plentiful multidisciplinary applications of modeling and simulation, the book uniquely addresses the criteria and challenges found within the field. Beginning with a foundation of concepts, terms, and categories, a theoretical and generalized approach to system of systems engineering is introduced, and real-world applications via case studies and examples are presented. A unified approach is maintained in an effort to understand the complexity of a single system as well as the context among other proximate systems. In addition, the book features: Cutting edge coverage of modeling and simulation within the field of system of systems, including transportation, system health management, space mission analysis, systems engineering methodology, and energy State-of-the-art advances within multiple domains to instantiate theoretic insights, applicable methods, and lessons learned from real-world applications of modeling and simulation The challenges of system of systems engineering using a systematic and holistic approach Key concepts, terms, and activities to provide a comprehensive, unified, and concise representation of the field A collection of chapters written by over 40 recognized international experts from academia, government, and industry A research agenda derived from the contribution of experts that guides scholars and researchers towards open questions Modeling and Simulation Support for System of Systems Engineering Applications is an ideal reference and resource for academics and practitioners in operations research, engineering, statistics, mathematics, modeling and simulation, and computer science. The book is also an excellent course book for graduate and PhD-level courses in modeling and simulation, engineering, and computer science.
Download or read book Defense Modeling and Simulation Office Information Data Base I DB Task Group Meetings Held February 14 18 1994 and Notes from the Previous Two I DB Meetings written by Defence Modeling and Simulation Office Information/Data Base (I/DB) Task Group and published by . This book was released on 1994 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combat Modeling written by Alan Washburn and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Combat Modeling" is a systematic learning resource and reference text for the quantitative analysis of combat. After a brief overview, authors Washburn and Kress present individual chapters on shooting without feedback; shooting with feedback; target defense; attrition models; game theory and wargames; search; unmanned aerial vehicles; and terror and insurgency. Three appendices provide a review of basic probability concepts, probability distributions, and Markov models; an introduction to optimization models; and a discussion of Monte-Carlo simulations. Drawing on their many years of experience at the Naval Postgraduate School in Monterey, California, Washburn and Kress have created a reference that will provide the tools and techniques for analysts involved in the underpinnings of combat decisions. This is a book that can be used as a military manual, reference book, and textbook for military courses on this vital subject.
Download or read book Simio and Simulation Modeling Analysis Applications written by Jeffrey S. Smith and published by Createspace Independent Publishing Platform. This book was released on 2017-05-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book opens up the world of simulation to you by providing the basics of general simulation techonology, identifying the skills needed for successful simulation projects, and introducting a state-of-the-art simulation package." --
Download or read book Modeling and Simulating Command and Control written by Il-Chul Moon and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commanding and controlling organizations in extreme situations is a challenging task in military, intelligence, and disaster management. Such command and control must be quick, effective, and considerate when dealing with the changing, complex, and risky conditions of the situation. To enable optimal command and control under extremes, robust structures and efficient operations are required of organizations. This work discusses how to design and conduct virtual experiments on resilient organizational structures and operational practices using modeling and simulation. The work illustrates key aspects of robustly networked organizations and modeled performance of human decision-makers through examples of naval-air defense, counterterrorism operations, and disaster responses.
