Download or read book Defects and Failures of Metals Their Origin and Elimination written by Eugene Paul Polushkin and published by . This book was released on 1956 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Defects and Failures of Metals Their Origin and Elimination written by E. P. Polushkin and published by . This book was released on 1959 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.

Download or read book Defects And Failures Of Metals written by E.P. Polushkin and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallurgy of Failure Analysis written by A. K. Das and published by McGraw-Hill Professional Publishing. This book was released on 1997 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: By analyzing failures of both process and design, this book serves as a valuable reference for those working in the areas of quality assurance, design engineering, metallurgy and materials. There are remedial measures for corrosion, overload, fatigue and wear; and case studies of problems.

Download or read book Metal Failures written by A. J. McEvily and published by John Wiley & Sons. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: * Reach correct, fact-based conclusions on the causes of metal failures * Present and defend these conclusions before highly critical bodies * Suggest design improvements that may prevent future failures Analytical methods presented include stress analysis, fracture mechanics, fatigue analysis, corrosion science, and nondestructive testing. Numerous case studies illustrate the application of basic principles of metallurgy and failure analysis to a wide variety of real-world situations. Readers learn how to investigate and analyze failures that involve: * Alloys and coatings * Brittle and ductile fractures * Thermal and residual stresses * Creep and fatigue * Corrosion, hydrogen embrittlement, and stress-corrosion cracking This useful professional reference is also an excellent learning tool for senior-level students in mechanical, materials, and civil engineering.

Download or read book Defects and failures of metals their origin and elmination written by Eugene Paul Polushkin and published by . This book was released on 1956 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Why Metals Fail written by R. D. Barer and published by CRC Press. This book was released on 1970 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Failures of Metals in Service written by John Alonzo Bennett and published by . This book was released on 1954 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrogen Effects in Materials written by Anthony W. Thompson and published by John Wiley & Sons. This book was released on 2013-09-27 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Fifth International Conference on the Effect of Hydrogen on the Behavior of Materials sponsored by the Structural Materials Division (SMD) Mechanical Metallurgy and Corrosion & Environmental Effects Committees of The Minerals, Metals & Materials Society held at Jackson Lake Lodge, Moran, Wyoming, September 11-14, 1994.

Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.

Download or read book Metallurgical Failure Analysis written by Kannadi Palankeezhe Balan and published by Elsevier. This book was released on 2018-01-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Failure Analysis: Techniques and Case Studies explores how components fail and what measures should be taken to avoid future failures. The book introduces the subject of failure analysis; covers the fundamentals and methodology of failure analysis, including fracture and fractography of metals and alloys and the tools and techniques used in a failure investigation; examines 37 case studies on high performance engineering components; features experimental results comprised of visual-, fractographic-, or metallographic- examination, hardness measurements and chemical analysis; includes illustrations and evidence obtained through test results to enhance understanding; and suggests suitable remedial measures when possible. The various case studies are classified according to the major causes of failures. The case studies pertain to: Improper Material Selection, Manufacturing Defects, Casting Defects, Overload, Fatigue, Corrosion Induced Failures, Hydrogen Embrittlement and Stress Corrosion Cracking, Wear and Elevated Temperature Failures. The book contains information gathered over three decades of the author’s experience handling a variety of failure cases and will go a long way toward inspiring practicing failure analysts. The book is designed for scientists, metallurgists, engineers, quality control inspectors, professors and students alike. Explores the fundamentals and methodology of failure analysis Examines the major causes of component failures Teaches a systematic approach to investigation to determine the cause of a failure Features 37 case studies on high performance engineering components

Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Academic Press. This book was released on 2019-06-15 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers looking at factors that cause metals to fail through stress, corrosion, or other processes. Predicting the influence of small defects and non-metallic inclusions on fatigue with any degree of accuracy is a particularly complex part of this. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions is the most trusted, detailed and comprehensive guide to this subject available. This expanded second edition introduces highly important emerging topics on metal fatigue, pointing the way for further research and innovation. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book. Demonstrates how to solve a wide range of specialized metal fatigue problems relating to small defects and non-metallic inclusions. Provides a detailed introduction to fatigue mechanisms and stress concentration. This edition is expanded to address even more topics, including low cycle fatigue, quality control of fatigue components, and more.

Download or read book Defects and Diffusion in Metals XIII written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2011-10-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thirteenth volume in the series covers the latest results in the field. As well as some 360 metals-related abstracts, the issue includes original papers on all of the major material groups: “Bulk Diffusion of Homovalent Non-Magnetic Atomic Probes of Titanium and Zirconium in Tungsten Single Crystals”, “Comparative Mössbauer Analysis of Superfine Structure of Hadfield Steel Upon Different Kinds of Severe Deformation”, “Assessment of Microstructural Degradation in 2.25Cr-1Mo Steel ...”, “Isochronal and Isothermal Annealing of Wrought Aluminum Alloy”, “Application of the Photoacoustic Method for the Determination of the Thermal Properties of Heat-Treated and Annealed Al-Li Alloy“, “Effect of Ageing on Microstructures, Electrical Properties and PALS of Aircraft Al Alloy 2024”, “Preparation of C/Cu Composite Powders by High-Energy Ball-Milling”, “Quantitative Analysis of Fiber Fracture in Powder Injection Molded Metal Composites”, “Wear Mechanisms of Ceramic-Reinforced Metal-Matrix Composite ...”, “Development and Characterization of Alumina-Silica Sand Nanoparticle Composites”, “Characterization and Properties of Copper-Silica Sand Nanoparticle Composites”, “Diffusion Processes Affecting the Performance of Heterogeneous Catalysts”, “Analytical Solutions for Moving Elliptical Paraboloid Heat Source in Semi-Infinite Plate”, “Solution for Modeling 3D Moving Heat Sources in a Semi-Infinite Medium ...”, “Probing the Phase Transition in Nanocrystalline TiO2 Powders ...”, “BSCCO 2212 Defective Tellurium Ions on Bi-Site”, “Self-Diffusion in Nano Zinc Sulphide”, “SIMS Study of 30keV H+ Ion-Implanted n-GaAs“, “Optical Studies of Physically Deposited Nano-Ag2Te Thin Films”

Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Defects and Failures in Pressure Vessels and Piping written by Helmut Thielsch and published by Krieger Publishing Company. This book was released on 1975 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography in Failure Analysis written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed analyses of failures of material components have proved to be valuable in many ways; by preventing further failures, by assessing the validity of designs and the selection of materials, by uncovering shortcomings in the processing of the materials in volved through characterizations of defects, and by revealing problems introduced during the manufacture or fabrication of the component. Increased recognition of the value of performing failure analyses has caused the field to develop into a very active area of tech nical endeavor. Failure analysis has been employed in numerous different technical dis ciplines and has proven beneficial. The increased activity has caused many new and im proved methods for performing these analyses to be developed. Among these are many methods which can be characterized as generally belonging to the field of metallography. In recognition of the important role that metallography plays in the performance of failure analyses, the absence of a text that specifically discusses this subject, and the be lief that communication of information on the subject would be of technical interest, The American Society for Metals and The International Metallographic Society co sponsored a symposium. The intent was to bring together world-recognized authorities working in various aspects of the failure analysis and metallographic fields to share meth ods they use, results they have obtained, and the purposes to which they utilized these results. The symposium, entitled "Metallography in Failure Analysis", was held in Hous ton, Texas, USA, July 17-18, 1977.