Download or read book Decimation Lowpass Filters for Sigma Delta Modulators written by Rüdiger Kusch and published by diplom.de. This book was released on 2002-12-18 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: The purpose of this thesis is to compare several filter topologies used for the decimation of sigma-delta modulated digital signals. The goal is to present optimized filter architectures with regard to an efficient VLSI implementation. A fifth-order 1-bit sigma-delta modulator using local feedback techniques will be considered as the front-end A/D converter. The subsequent digital filter reduces the sampling rate by a factor of 32. The decimation filter must guarantee a narrow transition band between 0.5 and 0.55 and stopband attenuation of 100dB. Chapter 1 provides a brief introduction into the principles of digital signal processing. The considerations are focused on FIR filters due to the requirements for acoustic applications. Chapter 2 illustrates the proposed overall structure and the design flow. The objective of chapter 3 is to present the principles of oversampling data converters using sigma-delta techniques. The 5V fifth-order SD-modulator with 90dB dynamic range (SNR+THD) will be presented, which has been fabricated in 1.2μm CMOS technology. For the sake of simplicity and robustness, a 1-bit quantizer will be used. Chapter 4 deals with typical hardware realizations of digital filters. Apart from the brute force implementation of the multirate filter with identical filters running in parallel, also the LUT-based approach for small filter orders will be presented. Due to the advantages of compact implementation, the bit-serial approach and the bit-serial multiplier are investigated in detail. In chapter 5 the straightforward one-stage multirate FIR filter will be introduced. To satisfy the specifications, a 4096 tap lowpass FIR filter will be designed. The influence of coefficient quantization is investigated and furthermore the block scaling method, to represent small values, is presented. The single-stage implementation becomes the more unattractive the higher the filter specifications are. Chapter 6, therefore, focuses the investigations on cascaded structures. The first stage is realized as a comb or sincK filter and decimates by a factor of 8 or 4. The frequently used conventional comb filter will be used but also a new architecture will be described. The new structure is based on the conventional comb filter with filter sharpening techniques to improve the frequency behavior. The unavoidable passband droop must be compensated for by the following lowpass FIR filter. In order to compare several [...]
Download or read book High speed Decimation Filter for a Delta sigma Analog to digital Converter written by Yiqun Xie and published by . This book was released on 1998 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reconfigurable Decimation Filters for Sigma Delta Modulators written by Rajesh Thirugnanam and published by . This book was released on 2003 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oversampling Delta Sigma Data Converters written by James C. Candy and published by John Wiley & Sons. This book was released on 1991-09-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This now famous anthology brings together various aspects of oversampling methods and compares and evaluates design approaches. It describes the theoretical analysis of converter performances, the actual design of converters and their simulation, circuit implementations, and applications.
Download or read book Delta Sigma Data Converters written by Steven R. Norsworthy and published by Wiley-IEEE Press. This book was released on 1997 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive guide offers a detailed treatment of the analysis, design, simulation and testing of the full range of today's leading delta-sigma data converters. Written by professionals experienced in all practical aspects of delta-sigma modulator design, Delta-Sigma Data Converters provides comprehensive coverage of low and high-order single-bit, bandpass, continuous-time, multi-stage modulators as well as advanced topics, including idle-channel tones, stability, decimation and interpolation filter design, and simulation.
Download or read book The Design of Low Voltage Low Power Sigma Delta Modulators written by Shahriar Rabii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oversampling techniques based on sigma-delta modulation are widely used to implement the analog/digital interfaces in CMOS VLSI technologies. This approach is relatively insensitive to imperfections in the manufacturing process and offers numerous advantages for the realization of high-resolution analog-to-digital (A/D) converters in the low-voltage environment that is increasingly demanded by advanced VLSI technologies and by portable electronic systems. In The Design of Low-Voltage, Low-Power Sigma-Delta Modulators, an analysis of power dissipation in sigma-delta modulators is presented, and a low-voltage implementation of a digital-audio performance A/D converter based on the results of this analysis is described. Although significant power savings can typically be achieved in digital circuits by reducing the power supply voltage, the power dissipation in analog circuits actually tends to increase with decreasing supply voltages. Oversampling architectures are a potentially power-efficient means of implementing high-resolution A/D converters because they reduce the number and complexity of the analog circuits in comparison with Nyquist-rate converters. In fact, it is shown that the power dissipation of a sigma-delta modulator can approach that of a single integrator with the resolution and bandwidth required for a given application. In this research the influence of various parameters on the power dissipation of the modulator has been evaluated and strategies for the design of a power-efficient implementation have been identified. The Design of Low-Voltage, Low-Power Sigma-Delta Modulators begins with an overview of A/D conversion, emphasizing sigma-delta modulators. It includes a detailed analysis of noise in sigma-delta modulators, analyzes power dissipation in integrator circuits, and addresses practical issues in the circuit design and testing of a high-resolution modulator. The Design of Low-Voltage, Low-Power Sigma-Delta Modulators will be of interest to practicing engineers and researchers in the areas of mixed-signal and analog integrated circuit design.
Download or read book Understanding Delta Sigma Data Converters written by Shanthi Pavan and published by John Wiley & Sons. This book was released on 2017-01-24 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition introduces operation and design techniques for Sigma-Delta converters in physical and conceptual terms, and includes chapters which explore developments in the field over the last decade Includes information on MASH architectures, digital-to-analog converter (DAC) mismatch and mismatch shaping Investigates new topics including continuous-time ΔΣ analog-to-digital converters (ADCs) principles and designs, circuit design for both continuous-time and discrete-time ΔΣ ADCs, decimation and interpolation filters, and incremental ADCs Provides emphasis on practical design issues for industry professionals
Download or read book Delta Sigma Modulators written by George I Bourdopoulos and published by World Scientific. This book was released on 2003 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book deals with the modeling and design of higher-order single-stage delta-sigma modulators. It provides an overview of the architectures, the quantizer models, the design techniques and the implementation issues encountered in the study of the delta-sigma modulators. A number of applications are discussed, with emphasis on use in the design of analog-to-digital converters and in frequency synthesis. The book is education- rather than research-oriented, containing numerical examples and unsolved problems. It is aimed at introducing the final-year undergraduate, the graduate student or the electronic engineer to this field.
Download or read book Low Power and Hardware Efficient Sigma Delta Decimation Filters written by Shailesh Balwant Nerurkar and published by . This book was released on 2003 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bandpass Sigma Delta Modulators written by Jurgen van Engelen and published by Springer Science & Business Media. This book was released on 1999-10-31 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sigma delta modulation has become a very useful and widely applied technique for high performance Analog-to-Digital (A/D) conversion of narrow band signals. Through the use of oversampling and negative feedback, the quantization errors of a coarse quantizer are suppressed in a narrow signal band in the output of the modulator. Bandpass sigma delta modulation is well suited for A/D conversion of narrow band signals modulated on a carrier, as occurs in communication systems such as AM/FM receivers and mobile phones. Due to the nonlinearity of the quantizer in the feedback loop, a sigma delta modulator may exhibit input signal dependent stability properties. The same combination of the nonlinearity and the feedback loop complicates the stability analysis. In Bandpass Sigma Delta Modulators, the describing function method is used to analyze the stability of the sigma delta modulator. The linear gain model commonly used for the quantizer fails to predict small signal stability properties and idle patterns accurately. In Bandpass Sigma Delta Modulators an improved model for the quantizer is introduced, extending the linear gain model with a phase shift. Analysis shows that the phase shift of a sampled quantizer is in fact a phase uncertainty. Stability analysis of sigma delta modulators using the extended model allows accurate prediction of idle patterns and calculation of small-signal stability boundaries for loop filter parameters. A simplified rule of thumb is derived and applied to bandpass sigma delta modulators. The stability properties have a considerable impact on the design of single-loop, one-bit, high-order continuous-time bandpass sigma delta modulators. The continuous-time bandpass loop filter structure should have sufficient degrees of freedom to implement the desired (small-signal stable) sigma delta modulator behavior. Bandpass Sigma Delta Modulators will be of interest to practicing engineers and researchers in the areas of mixed-signal and analog integrated circuit design.
Download or read book Analogue digital ASICs written by Randeep Singh Soin and published by IET. This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many applications, circuits that combine analog and digital signals can provide superior solutions to those produced with digital signals alone. Eighteen contributions in four sections--processing technology, circuit techniques and building blocks, design and applications, and CAD and supporting tools--detail and support this new approach. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book SystemC and SystemC AMS in Practice written by Amal Banerjee and published by Springer Science & Business Media. This book was released on 2013-09-13 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how engineers can make optimum use of the two industry standard analysis/design tools, SystemC and SystemC-AMS. The authors use a system-level design approach, emphasizing how SystemC and SystemC-AMS features can be exploited most effectively to analyze/understand a given electronic system and explore the design space. The approach taken by this book enables system engineers to concentrate on only those SystemC/SystemC-AMS features that apply to their particular problem, leading to more efficient design. The presentation includes numerous, realistic and complete examples, which are graded in levels of difficulty to illustrate how a variety of systems can be analyzed with these tools.
Download or read book High Resolution IF to Baseband SigmaDelta ADC for Car Radios written by Paulo Silva and published by Springer Science & Business Media. This book was released on 2008-02-29 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Resolution IF-to-Baseband SigmaDelta ADC for Car Radios addresses the theory, system level design and circuit implementation of a high-resolution continuous-time IF-to-baseband quadrature SigmaDelta ADC. The target application of this ADC is in AM/FM/IBOC car radios. The ADC achieves a dynamic range of 118dB, which eliminates the need for an IF VGA or AM channel filter in car radios. The author is very well known within the Analog Circuits community.
Download or read book Digital Signal Processing written by K. Deergha Rao and published by Springer. This book was released on 2018-04-14 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive exposition of all major topics in digital signal processing (DSP). With numerous illustrative examples for easy understanding of the topics, it also includes MATLAB-based examples with codes in order to encourage the readers to become more confident of the fundamentals and to gain insights into DSP. Further, it presents real-world signal processing design problems using MATLAB and programmable DSP processors. In addition to problems that require analytical solutions, it discusses problems that require solutions using MATLAB at the end of each chapter. Divided into 13 chapters, it addresses many emerging topics, which are not typically found in advanced texts on DSP. It includes a chapter on adaptive digital filters used in the signal processing problems for faster acceptable results in the presence of changing environments and changing system requirements. Moreover, it offers an overview of wavelets, enabling readers to easily understand the basics and applications of this powerful mathematical tool for signal and image processing. The final chapter explores DSP processors, which is an area of growing interest for researchers. A valuable resource for undergraduate and graduate students, it can also be used for self-study by researchers, practicing engineers and scientists in electronics, communications, and computer engineering as well as for teaching one- to two-semester courses.
Download or read book Of Poles and Zeros written by Frank Scherbaum and published by Springer Science & Business Media. This book was released on 2006-12-11 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital signal processing has become an integral part of observational seismology. Seismic waveforms and the parameters commonly extracted from them are strongly influenced by the effects of numerous filters, both within the earth and within the recording system. With the advent of numerous software tools for the processing of digital seismograms, seismologists have unprecedented power in extracting information from seismic records. These tools are often based on sophisticated theoretical aspects of digital signal processing which, to be used properly, need to be understood. This book is aimed at observational seismologists and students in geophysics trying to obtain a basic understanding of those aspects of digital signal processing that are relevant to the interpretation of seismograms. It covers the basic theory of linear systems, the design and analysis of simple digital filters, the effect of sampling and A/D conversion, the calculation of 'true ground motion', and the effects of seismic recording systems on parameters extracted from digital seismograms. It contains numerous examples and exercises together with their solutions. The second edition contains the Digital Seismology Tutor by Elke Schmidtke (University of Potsdam) and Frank Scherbaum, a Java applet with all the tools to reproduce and/or modify the examples and problems from this book as well as a treatment of sigma-delta modulation with new problems and exercises.
Download or read book Fundamentals of Electronics 3 written by Pierre Muret and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 60 years, electronics has undergone important and rapid developments. This has generated a large range of theoretical and practical notions. This book presents a comprehensive treatise on the evolution of electronics and allows the reader to grasp both the fundamental concepts and the associated practical applications through examples and exercises. Following on from Volume 1, which studied elementary devices, their electrical models and basic functions, Volume 2 was devoted to linear and stationary systems in the continuous-time regime. This third volume deals with the properties of discrete-time and quantized level systems over two chapters. The first presents an analysis of sampled signals and systems, with applications on switched capacitors circuits, analog and digital phase locked loops, frequency synthesis and filters characterized by either finite or infinite impulse response. Most tools are useful to elucidate the properties of both analog and digital systems. The second chapter focuses on the properties of analog-to-digital and digital-to-analog converters. Various principles that are used to perform these conversions are described. Finally, a large section is devoted to sigma-delta converters. Throughout this whole chapter, the signal-to-noise ratio, which is a central issue in these quantized level systems, is analyzed and discussed. Both chapters are followed by useful exercises which illustrate the general principles addressed. The exercises further build on the material covered in the chapters, particularly that which may not have been covered in detail.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2002 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
