Download or read book Decentralized Estimation and Control for Multisensor Systems written by Arthur G.O. Mutambara and published by Routledge. This book was released on 2019-05-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decentralized Estimation and Control for Multisensor Systems explores the problem of developing scalable, decentralized estimation and control algorithms for linear and nonlinear multisensor systems. Such algorithms have extensive applications in modular robotics and complex or large scale systems, including the Mars Rover, the Mir station, and Space Shuttle Columbia. Most existing algorithms use some form of hierarchical or centralized structure for data gathering and processing. In contrast, in a fully decentralized system, all information is processed locally. A decentralized data fusion system includes a network of sensor nodes - each with its own processing facility, which together do not require any central processing or central communication facility. Only node-to-node communication and local system knowledge are permitted. Algorithms for decentralized data fusion systems based on the linear information filter have been developed, obtaining decentrally the same results as those in a conventional centralized data fusion system. However, these algorithms are limited, indicating that existing decentralized data fusion algorithms have limited scalability and are wasteful of communications and computation resources. Decentralized Estimation and Control for Multisensor Systems aims to remove current limitations in decentralized data fusion algorithms and to extend the decentralized principle to problems involving local control and actuation. The text discusses: Generalizing the linear Information filter to the problem of estimation for nonlinear systems Developing a decentralized form of the algorithm Solving the problem of fully connected topologies by using generalized model distribution where the nodal system involves only locally relevant states Reducing computational requirements by using smaller local model sizes Defining internodal communication Developing estima

Download or read book Multisensor Fusion written by Anthony K. Hyder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time, all branches of the military have used a wide range of sensors to provide data for many purposes, including surveillance, reconnoitring, target detection and battle damage assessment. Many nations have also attempted to utilise these sensors for civilian applications, such as crop monitoring, agricultural disease tracking, environmental diagnostics, cartography, ocean temperature profiling, urban planning, and the characterisation of the Ozone Hole above Antarctica. The recent convergence of several important technologies has made possible new, advanced, high performance, sensor based applications relying on the near-simultaneous fusion of data from an ensemble of different types of sensors. The book examines the underlying principles of sensor operation and data fusion, the techniques and technologies that enable the process, including the operation of 'fusion engines'. Fundamental theory and the enabling technologies of data fusion are presented in a systematic and accessible manner. Applications are discussed in the areas of medicine, meteorology, BDA and targeting, transportation, cartography, the environment, agriculture, and manufacturing and process control.

Download or read book Decentralized Estimation Using Conservative Information Extraction written by Robin Forsling and published by Linköping University Electronic Press. This book was released on 2020-12-17 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor networks consist of sensors (e.g., radar and cameras) and processing units (e.g., estimators), where in the former information extraction occurs and in the latter estimates are formed. In decentralized estimation information extracted by sensors has been pre-processed at an intermediate processing unit prior to arriving at an estimator. Pre-processing of information allows for the complexity of large systems and systems-of-systems to be significantly reduced, and also makes the sensor network robust and flexible. One of the main disadvantages of pre-processing information is that information becomes correlated. These correlations, if not handled carefully, potentially lead to underestimated uncertainties about the calculated estimates. In conservative estimation the unknown correlations are handled by ensuring that the uncertainty about an estimate is not underestimated. If this is ensured the estimate is said to be conservative. Neglecting correlations means information is double counted which in worst case implies diverging estimates with fatal consequences. While ensuring conservative estimates is the main goal, it is desirable for a conservative estimator, as for any estimator, to provide an error covariance which is as small as possible. Application areas where conservative estimation is relevant are setups where multiple agents cooperate to accomplish a common objective, e.g., target tracking, surveillance and air policing. The first part of this thesis deals with theoretical matters where the conservative linear unbiased estimation problem is formalized. This part proposes an extension of classical linear estimation theory to the conservative estimation problem. The conservative linear unbiased estimator (CLUE) is suggested as a robust and practical alternative for estimation problems where the correlations are unknown. Optimality criteria for the CLUE are provided and further investigated. It is shown that finding an optimal CLUE is more complicated than finding an optimal linear unbiased estimator in the classical version of the problem. To simplify the problem, a CLUE that is optimal under certain restrictions will also be investigated. The latter is named restricted best CLUE. An important result is a theorem that gives a closed form solution to a restricted best CLUE. Furthermore, several conservative estimation methods are described followed by an analysis of their properties. The methods are shown to be conservative and optimal under different assumptions about the underlying correlations. The second part of the thesis focuses on practical aspects of the conservative approach to decentralized estimation in configurations where the communication channel is constrained. The diagonal covariance approximation is proposed as a data reduction technique that complies with the communication constraints and if handled correctly can be shown to preserve conservative estimates. Several information selection methods are derived that can reduce the amount of data being transmitted in the communication channel. Using the information selection methods it is possible to decide what information other actors of the sensor network find useful.

Download or read book Modelling Estimation and Control of Networked Complex Systems written by Alessandro Chiuso and published by Springer. This book was released on 2009-10-13 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paradigm of complexity is pervading both science and engineering, le- ing to the emergence of novel approaches oriented at the development of a systemic view of the phenomena under study; the de?nition of powerful tools for modelling, estimation, and control; and the cross-fertilization of di?erent disciplines and approaches. One of the most promising paradigms to cope with complexity is that of networked systems. Complex, dynamical networks are powerful tools to model, estimate, and control many interesting phenomena, like agent coordination, synch- nization, social and economics events, networks of critical infrastructures, resourcesallocation,informationprocessing,controlovercommunicationn- works, etc. Advances in this ?eld are highlighting approaches that are more and more oftenbasedondynamicalandtime-varyingnetworks,i.e.networksconsisting of dynamical nodes with links that can change over time. Moreover, recent technological advances in wireless communication and decreasing cost and size of electronic devices are promoting the appearance of large inexpensive interconnected systems, each with computational, sensing and mobile ca- bilities. This is fostering the development of many engineering applications, which exploit the availability of these systems of systems to monitor and control very large-scale phenomena with ?ne resolution.

Download or read book Multisensor Data Fusion written by Hassen Fourati and published by CRC Press. This book was released on 2017-12-19 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multisensor Data Fusion: From Algorithms and Architectural Design to Applications covers the contemporary theory and practice of multisensor data fusion, from fundamental concepts to cutting-edge techniques drawn from a broad array of disciplines. Featuring contributions from the world’s leading data fusion researchers and academicians, this authoritative book: Presents state-of-the-art advances in the design of multisensor data fusion algorithms, addressing issues related to the nature, location, and computational ability of the sensors Describes new materials and achievements in optimal fusion and multisensor filters Discusses the advantages and challenges associated with multisensor data fusion, from extended spatial and temporal coverage to imperfection and diversity in sensor technologies Explores the topology, communication structure, computational resources, fusion level, goals, and optimization of multisensor data fusion system architectures Showcases applications of multisensor data fusion in fields such as medicine, transportation's traffic, defense, and navigation Multisensor Data Fusion: From Algorithms and Architectural Design to Applications is a robust collection of modern multisensor data fusion methodologies. The book instills a deeper understanding of the basics of multisensor data fusion as well as a practical knowledge of the problems that can be faced during its execution.

Download or read book Optimal Estimation of Dynamic Systems written by John L. Crassidis and published by CRC Press. This book was released on 2011-10-26 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal self-study guide for practicing engineers as well as senior undergraduate and beginning graduate students, this book highlights the importance of both physical and numerical modeling in solving dynamics-based estimation problems found in engineering systems, such as spacecraft attitude determination, GPS navigation, orbit determination, and aircraft tracking. With more than 100 pages of new material, this reorganized and expanded edition incorporates new theoretical results, a new chapter on advanced sequential state estimation, and additional examples and exercises. MATLAB codes are available on the book's website.

Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics" (ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.

Download or read book Event Based State Estimation written by Dawei Shi and published by Springer. This book was released on 2015-11-19 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores event-based estimation problems. It shows how several stochastic approaches are developed to maintain estimation performance when sensors perform their updates at slower rates only when needed. The self-contained presentation makes this book suitable for readers with no more than a basic knowledge of probability analysis, matrix algebra and linear systems. The introduction and literature review provide information, while the main content deals with estimation problems from four distinct angles in a stochastic setting, using numerous illustrative examples and comparisons. The text elucidates both theoretical developments and their applications, and is rounded out by a review of open problems. This book is a valuable resource for researchers and students who wish to expand their knowledge and work in the area of event-triggered systems. At the same time, engineers and practitioners in industrial process control will benefit from the event-triggering technique that reduces communication costs and improves energy efficiency in wireless automation applications.

Download or read book Multi Sensor Data Fusion with MATLAB written by Jitendra R. Raol and published by CRC Press. This book was released on 2009-12-16 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using MATLAB examples wherever possible, Multi-Sensor Data Fusion with MATLAB explores the three levels of multi-sensor data fusion (MSDF): kinematic-level fusion, including the theory of DF; fuzzy logic and decision fusion; and pixel- and feature-level image fusion. The authors elucidate DF strategies, algorithms, and performance evaluation mainly

Download or read book Nonlinear Filtering written by Jitendra R. Raol and published by CRC Press. This book was released on 2017-07-12 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Filtering covers linear and nonlinear filtering in a comprehensive manner, with appropriate theoretic and practical development. Aspects of modeling, estimation, recursive filtering, linear filtering, and nonlinear filtering are presented with appropriate and sufficient mathematics. A modeling-control-system approach is used when applicable, and detailed practical applications are presented to elucidate the analysis and filtering concepts. MATLAB routines are included, and examples from a wide range of engineering applications - including aerospace, automated manufacturing, robotics, and advanced control systems - are referenced throughout the text.

Download or read book Design and Analysis of Control Systems written by Arthur G.O. Mutambara and published by CRC Press. This book was released on 2017-12-14 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to inspire and cultivate the ability to design and analyze feasible control algorithms for a wide range of engineering applications, this comprehensive text covers the theoretical and practical principles involved in the design and analysis of control systems. From the development of the mathematical models for dynamic systems, the author shows how they are used to obtain system response and facilitate control, then addresses advanced topics, such as digital control systems, adaptive and robust control, and nonlinear control systems.

Download or read book New Trends on System Science and Engineering written by H. Fujita and published by IOS Press. This book was released on 2015-06-23 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: System science and engineering is a field that covers a wide spectrum of modern technology. A system can be seen as a collection of entities and their interrelationships, which forms a whole greater than the sum of the entities and interacts with people, organisations, cultures and activities and the interrelationships among them. Systems composed of autonomous subsystems are not new, but the increased complexity of modern technology demands ever more reliable, intelligent, robust and adaptable systems to meet evolving needs. This book presents papers delivered at the International Conference on System Science and Engineering (ICSSE2015), held in Morioka, Japan, in July 2015. Some of the topics covered here include: systems modeling, tools and simulation; cloud robotics and computing systems; systems safety and security; smart grid, human systems and industrial organization and management; and novel applications of systems engineering and systems architecture. Capturing as it does the latest state-of-the-art and challenges in system sciences and its supporting technology, this book will be of interest to all those involved in developing and using system science methodology, tools and techniques

Download or read book Unmanned Aircraft Systems written by Ella Atkins and published by John Wiley & Sons. This book was released on 2016-11-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the design, development, operation and mission profiles of unmanned aircraft systems, this single, comprehensive volume forms a complete, stand-alone reference on the topic. The volume integrates with the online Wiley Encyclopedia of Aerospace Engineering, providing many new and updated articles for existing subscribers to that work.

Download or read book Nonlinear Filtering written by Kumar Pakki Bharani Chandra and published by Springer. This book was released on 2018-11-20 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives readers in-depth know-how on methods of state estimation for nonlinear control systems. It starts with an introduction to dynamic control systems and system states and a brief description of the Kalman filter. In the following chapters, various state estimation techniques for nonlinear systems are discussed, including the extended, unscented and cubature Kalman filters. The cubature Kalman filter and its variants are introduced in particular detail because of their efficiency and their ability to deal with systems with Gaussian and/or non-Gaussian noise. The book also discusses information-filter and square-root-filtering algorithms, useful for state estimation in some real-time control system design problems. A number of case studies are included in the book to illustrate the application of various nonlinear filtering algorithms. Nonlinear Filtering is written for academic and industrial researchers, engineers and research students who are interested in nonlinear control systems analysis and design. The chief features of the book include: dedicated coverage of recently developed nonlinear, Jacobian-free, filtering algorithms; examples illustrating the use of nonlinear filtering algorithms in real-world applications; detailed derivation and complete algorithms for nonlinear filtering methods, which help readers to a fundamental understanding and easier coding of those algorithms; and MATLAB® codes associated with case-study applications, which can be downloaded from the Springer Extra Materials website.

Download or read book Multisensor Fusion A Minimal Representation Framework written by Rajive Joshi and published by World Scientific. This book was released on 1999-12-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fusion of information from sensors with different physical characteristics, such as sight, touch, sound, etc., enhances the understanding of our surroundings and provides the basis for planning, decision-making, and control of autonomous and intelligent machines.The minimal representation approach to multisensor fusion is based on the use of an information measure as a universal yardstick for fusion. Using models of sensor uncertainty, the representation size guides the integration of widely varying types of data and maximizes the information contributed to a consistent interpretation.In this book, the general theory of minimal representation multisensor fusion is developed and applied in a series of experimental studies of sensor-based robot manipulation. A novel application of differential evolutionary computation is introduced to achieve practical and effective solutions to this difficult computational problem.

Download or read book Offshore Mechatronics Systems Engineering written by Hamid Reza Karimi and published by CRC Press. This book was released on 2018-07-04 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a systematical and almost self-contained description of the many facets of envisaging, designing, implementing or experimentally exploring offshore mechatronics and systems along the adequate designs of integrated modeling, safety, control and supervision infrastructure. With the rapid improvements in offshore technologies in various fields such as oil and gas industry, wind energy, robotics and logistics, many researchers in academia and industry have focused on technology-based challenges raised in offshore environment. This book introduces novel theoretical or practical techniques for offshore mechatronics systems. Chapters cover general application model-based systems engineering, wind energy, control systems, mechanics, health monitoring, safety critical human-machine systems, logistics and offshore industrial complexes such as oil and gas operations, robotics, large space structures and autonomous underwater vehicles, and some other advanced technologies. The core feature of this book is that of establishing synergies of modeling, control, computing and mechanics in order to achieve not only robust plant system operation but also properties such as safety, cost, integrity and survivability while retaining desired performance quality. The book provides innovative insights into applications aspects and theoretical understanding of complex offshore mechatronics systems that has emerged in recent years, either via physical implementations or via extensive computer simulations in addition to sound innovated theoretical developments. It will serve as a reference for graduate and postgraduate students and for researchers in all engineering disciplines, including mechanical engineering, electrical engineering and applied mathematics to explore the state-of-theart techniques for solving problems of integrated modeling, control and supervision of complex offshore plants with collective safety and robustness. Thus it shall be useful as a guidance for system engineering practitioners and system theoretic researchers alike.

Download or read book Advances in Autonomous Robotics Systems written by Michael Mistry and published by Springer. This book was released on 2014-08-23 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th Conference on Advances in Autonomous Robotics, TAROS 2014, held in Birmingham, UK, in September 2014. The 23 revised full papers presented together with 9 extended abstracts were carefully reviewed and selected from 48 submissions. The overall program covers various aspects of robotics, including navigation, planning, sensing and perception, flying and swarm robots, ethics, humanoid robotics, human-robot interaction, and social robotics.