Download or read book DC DC Converter Topologies written by Gerry Moschopoulos and published by John Wiley & Sons. This book was released on 2024-01-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look at DC-DC converters and advanced power converter topologies for all skills levels As it can be rare for source voltage to meet the requirements of a Direct Current (DC) load, DC-DC converters are essential to access service. DC-DC power converters employ power semiconductor devices (like MOSFETs and IGBTs) as switches and passive elements such as capacitors, inductors, and transformers to alter the voltage provided by a DC source into the necessary DC voltage as is required by a DC load. This source can be a battery, solar panels, fuel cells, or a DC bus voltage fed by rectified AC utility voltage. As the many components of DC-DC converters can be differently arranged into circuit structures called topologies, there are as many possible circuit topologies as there are possible combinations of circuit elements. Focusing on DC-DC switch-mode power converters ranging from 50 W to 10kW, DC-DC Converter Topologies provides a survey of all converter topology types within this power range. General principles are described for each topology type using a representative converter as an example. Variations that can be found that differ from the example are then examined, with a helpful discussion of comparisons when relevant. A broad range of topics is covered within the book, from simple, low-power converters to complex, high-power converters and everywhere in between. DC-DC Converter Topologies readers will also find: A detailed discussion of four key DC-DC converter topologies Description of isolated two-switch pulse-width modulated (PWM) topologies including push-pull, half-bridge, and interleaved converters An exploration of high-gain converters such as coupled inductors, voltage multipliers, and switched capacitor converters This book provides the tools so that a non-expert will be equipped to deal with the vast array of DC-DC converters that presently exist. As such, DC-DC Converter Topologies is a useful reference for electrical engineers, professors, and graduate students studying in the field.

Download or read book New Topologies and Modulation Schemes for Soft Switching Isolated DC DC Converters written by Zhiqiang Guo and published by Springer Nature. This book was released on 2019-09-20 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a series of new topologies and modulation schemes for soft-switching in isolated DC–DC converters. Providing detailed analyses and design procedures for converters used in a broad range of applications, it offers a wealth of engineering insights for researchers and students in the field of power electronics, as well as stimulating new ideas for future research.

Download or read book Advanced DC DC Power Converters and Switching Converters written by Salvatore Musumeci and published by MDPI. This book was released on 2021-03-30 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, power electronics is an enabling technology in the energy development scenario. Furthermore, power electronics is strictly linked with several fields of technological growth, such as consumer electronics, IT and communications, electrical networks, utilities, industrial drives and robotics, and transportation and automotive sectors. Moreover, the widespread use of power electronics enables cost savings and minimization of losses in several technology applications required for sustainable economic growth. The topologies of DC–DC power converters and switching converters are under continuous development and deserve special attention to highlight the advantages and disadvantages for use increasingly oriented towards green and sustainable development. DC–DC converter topologies are developed in consideration of higher efficiency, reliable control switching strategies, and fault-tolerant configurations. Several types of switching converter topologies are involved in isolated DC–DC converter and nonisolated DC–DC converter solutions operating in hard-switching and soft-switching conditions. Switching converters have applications in a broad range of areas in both low and high power densities. The articles presented in the Special Issue titled "Advanced DC-DC Power Converters and Switching Converters" consolidate the work on the investigation of the switching converter topology considering the technological advances offered by innovative wide-bandgap devices and performance optimization methods in control strategies used.

Download or read book Analysis and Design of Power Converter Topologies for Application in Future More Electric Aircraft written by Amit Kumar Singh and published by Springer. This book was released on 2018-04-20 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis proposes new power converter topologies suitable for aircraft systems. It also proposes both AC-DC and DC-DC types of converters for different electrical loads to improve the performance these systems. To increase fuel efficiency and reduce environmental impacts, less efficient non-electrical aircraft systems are being replaced by electrical systems. However, more electrical systems requires more electrical power to be generated in the aircraft. The increased consumption of electrical power in both civil and military aircrafts has necessitated the use of more efficient electrical power conversion technologies. This book presents acomprehensive mathematical analysis and the design and digital simulation of the power converters. Subsequently it discusses the construction of the hardware prototypes of each converter and the experimental tests carried out to verify the benefits of the proposed solutions in comparison to the existing solutions.

Download or read book Advanced DC DC Converters written by Fang Lin Luo and published by CRC Press. This book was released on 2003-09-29 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of authors Fang Lin Luo and Hong Ye, DC/DC converters have now been sorted into their six generations, and by a rough count, over 500 different topologies currently exist, with more being developed each year. Advanced DC/DC Converters off

Download or read book DC DC Converters for Future Renewable Energy Systems written by Neeraj Priyadarshi and published by Springer Nature. This book was released on 2021-09-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the analysis and control of numerous DC-DC converters widely used in several applications such as standalone, grid integration, and motor drives-based renewable energy systems. The book provides extensive simulation and practical analysis of recent and advanced DC-DC power converter topologies. This self-contained book contributes to DC-DC converters design, control techniques, and industrial as well as domestic applications of renewable energy systems. This volume will be useful for undergraduate/postgraduate students, energy planners, designers, system analysis, and system governors.

Download or read book Design and Implementation of Fully Integrated Inductive DC DC Converters in Standard CMOS written by Mike Wens and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS DC-DC Converters aims to provide a comprehensive dissertation on the matter of monolithic inductive Direct-Current to Direct-Current (DC-DC) converters. For this purpose seven chapters are defined which will allow the designer to gain specific knowledge on the design and implementation of monolithic inductive DC-DC converters, starting from the very basics.

Download or read book Power Electronic Converters for Microgrids written by Suleiman M. Sharkh and published by John Wiley & Sons. This book was released on 2014-04-14 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: As concerns about climate change, energy prices, and energy security loom, regulatory and research communities have shown growing interest in alternative energy sources and their integration into distributed energy systems. However, many of the candidate microgeneration and associated storage systems cannot be readily interfaced to the 50/60 Hz grid. In Power Electronic Converters for Microgrids, Sharkh and Abu-Sara introduce the basics and practical concerns of analyzing and designing such micro-generation grid interface systems. Readers will become familiar with methods for stably feeding the larger grid, importing from the grid to charge on-site storage, disconnecting from the grid in case of grid failure, as well as connect multiple microgrids while sharing their loads appropriately. Sharkh and Abu-Sara introduce not only the larger context of the technology, but also present potential future applications, along with detailed case studies and tutorials to help the reader effectively engineer microgrid systems.

Download or read book Soft Switching PWM Full Bridge Converters written by Xinbo Ruan and published by John Wiley & Sons. This book was released on 2014-04-03 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft-switching PWM full-bridge converters have been widely used in medium-to-high power DC-DC conversions for topological simplicity, easy control and high effi ciency. Early works on soft-switching PWM full-bridge converter by many researchers included various topologies and modulation strategies. However, these works were scattered, and the relationship among these topologies and modulation strategies had not been revealed. This book intends to describe systematically the soft-switching techniques for pulse-width modulation (PWM) full-bridge converters, including the topologies, control and design, and it reveals the relationship among the various topologies and PWM strategies previously proposed by other researchers. The book not only presents theoretical analysis, but also gives many detailed design examples of the converters. Describes the soft-switching techniques for pulse-width modulation (PWM) full-bridge converters systematically Covers topologies, control and design, from the basics, through to applications and development Deliberates the soft-switching PMW control technique rather than the standard PWM control technique Presents detailed theoretical analysis with design examples for various possible variations to the full-bridge topology using the soft-switching technique Soft-Switching PWM Full-Bridge Converters: Topologies, Control, and Design is an essential and valuable reference for graduate students and academics majoring in power electronics and power supply design engineers. Senior undergraduate students majoring in electrical engineering and automation engineering would also fi nd this book useful.

Download or read book Multilevel Converters Analysis Modulation Topologies and Applications written by Gabriele Grandi and published by MDPI. This book was released on 2019-10-14 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of scientific papers concerning multilevel inverters examined from different points of view. Many applications are considered, such as renewable energy interface, power conditioning systems, electric drives, and chargers for electric vehicles. Different topologies have been examined in both new configurations and well-established structures, introducing novel and particular modulation strategies, and examining the effect of modulation techniques on voltage and current harmonics and the total harmonic distortion.

Download or read book Non Isolated DC DC Converters for Renewable Energy Applications written by Frede Blaabjerg and published by CRC Press. This book was released on 2021-04-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic (PV) energy generation is an excellent example of large-scale electric power generation through various parallel arrangements of small voltage-generating solar cells or modules. However, PV generation systems require power electronic converters system to satisfy the need for real-time applications or to balance the demand for power from electric. Therefore, a DC-DC power converter is a vital constituent in the intermediate conversion stage of PV power. This book presents a comprehensive review of various non-isolated DC-DC power converters. Non-isolated DC-DC converters for renewable energy system (RES) application presented in this book 1st edition through a detailed original investigation, obtained numerical/experimental results, and guided the scope to design new families of converters: DC-DC multistage power converter topologies, Multistage "X-Y converter family", Nx IMBC (Nx Interleaved Multilevel Boost Converter), Cockcroft Walton (CW) Voltage Multiplier-Based Multistage/Multilevel Power Converter (CW-VM-MPC) converter topologies, and Z-source and quasi Z-source. Above solutions are discussed to show how they can achieve the maximum voltage conversion gain ratio by adapting the passive/active component within the circuits. For assessment, we have recommended novel power converters through their functionality and designs, tested and verified by numerical software. Further, the hardware prototype implementation is carried out through a flexible digital processor. Both numerical and experimental results always shown as expected close agreement with primary theoretical hypotheses. This book offers guidelines and recommendation for future development with the DC-DC converters for RES applications based on cost-effective, and reliable solutions.

Download or read book CMOS Integrated Capacitive DC DC Converters written by Tom Van Breussegem and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed analysis of all aspects of capacitive DC-DC converter design: topology selection, control loop design and noise mitigation. Readers will benefit from the authors’ systematic overview that starts from the ground up, in-depth circuit analysis and a thorough review of recently proposed techniques and design methodologies. Not only design techniques are discussed, but also implementation in CMOS is shown, by pinpointing the technological opportunities of CMOS and demonstrating the implementation based on four state-of-the-art prototypes.

Download or read book Single Inductor Multiple Output Converters written by Albert Ting Leung Lee and published by CRC Press. This book was released on 2021-12-16 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive overview of Single-Inductor Multiple-Output Converters from both theoretical and practical perspectives. Based on the authors’ in-depth research, the volume covers not only conventional SIMO DC-DC converters but also the new generations of SIMO such as SIMO AC-DC converters, SIMO DC-AC converters (or SIMO inverters), and the latest SIMO hybrid converters. This book offers a holistic and systematic presentation of all types of SIMO converters, encompassing the derivation of the circuit topologies, the definition of key concepts, detailed discussion of theoretical underpinnings, design methodology and control schemes, as well as design considerations and techniques that enable practical implementation. Specific examples of real-world applications of SIMO converters are also provided. The volume offers a comprehensive overview and systematic classification of the traditional and modern topologies of SIMO converters in terms of system architecture, circuit analysis, operating principles, control methods, design considerations and practical implementation. Specifically, the book presents the mathematical models and design principles necessary for analyzing the behavior of each kind of SIMO converter, and building upon that, introduces and imparts new approaches and techniques when designing such converters, guiding engineering students and power engineers towards achieving low-cost, compact and energy efficient SIMO converters. offers the design considerations and optimization as well as describing the key applications of SIMO converters. The book fills a significant niche in the power electronics literature and provides a complete perspective on SIMO converters that hopefully can inspire appreciation and better understanding of the subject matter. It can be directly adopted in undergraduate or graduate coursework as well as postgraduate research programs.

Download or read book High Power Density DC DC Converter written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2018-11-07 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed. Divan, Deepakraj M. Unspecified Center...

Download or read book 2016 International Conference on Electrical Electronics and Optimization Techniques ICEEOT written by IEEE Staff and published by . This book was released on 2016-03-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the conference is to bring Students, Engineers, Researchers and Scientists to single platform for share their knowledge and ideas in the recent trends in the field of Engineering, Science and Technology

Download or read book Soft Commutation Isolated DC DC Converters written by Ivo Barbi and published by Springer. This book was released on 2018-08-27 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operation and analysis of soft-commutated isolated DC–DC converters used in the design of high efficiency and high power density equipment. It explains the basic principles behind first- and second-order circuits with power switches to enable readers to understand the importance of these converters in high efficiency and high power density power supply design for residential, commercial, industrial and medical use as well as in aerospace equipment. With each chapter featuring a different power converter topology, the book covers the most important resonant converters, including series resonant converters; resonant LLC converters; soft commutation pulse width modulation converters; zero voltage switching; and zero current switching. Each topic is presented with full analysis, a showcase of the power stages of the converters, exercises and their solutions as well as simulation results, which mainly focus on the commutation analysis and output characteristic. This book is a valuable source of information for professionals working in power electronics, power conversion and design of high efficiency and high power density DC–DC converters and switch mode power supplies. The book also serves as a point of reference for engineers responsible for development projects and equipment in companies and research centers and a text for advanced students.

Download or read book Three phase AC AC Power Converters Based on Matrix Converter Topology written by Paweł Szcześniak and published by Springer Science & Business Media. This book was released on 2013-02-28 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC voltage frequency changes is one of the most important functions of solid state power converters. The most desirable features in frequency converters are the ability to generate load voltages with arbitrary amplitude and frequency, sinusoidal currents and voltages waveforms; the possibility of providing unity power factor for any load; and, finally, a simple and compact power circuit. Over the past decades, a number of different frequency converter topologies have appeared in the literature, but only the converters with either a voltage or current DC link are commonly used in industrial applications. Improvements in power semiconductor switches over recent years have resulted in the development of many structures of AC-AC converters without DC electric energy storage. Such converters are an alternative solution for frequently recommended systems with DC energy storage and are characterized by a lower price, smaller size and longer lifetime. Most of the these topologies are based on the structure of the matrix converter. Three-Phase AC-AC Power Converters Based On Matrix Converter Topology: Matrix-reactance frequency converters concept presents a review of power frequency converters, with special attention paid to converters without DC energy storage. Particular attention is paid to nine new converters named matrix-reactance frequency converters which have been developed by the author and the team of researchers from Institute of Electrical Engineering at the University of Zielona Góra. The topologies of the presented matrix-reactance frequency converters are based on a three-phase unipolar buck-boost matrix-reactance chopper with source or load switches arranged as in a matrix converter. This kind of approach makes it possible to obtain an output voltage greater than the input one (similar to that in a matrix-reactance chopper) and a frequency conversion (similar to that in a matrix converter). Written for researchers and Ph.D. students working in the field of power electronics converters and drive systems, Three-Phase AC-AC Power Converters Based On Matrix Converter Topology: Matrix-reactance frequency converters concept will also be valuable to power electronics converter designers and users; R&D centers; and readers needing industry solutions in variable speed drive systems, such as automation and aviation.