Download or read book Fracture Fatigue Failure and Damage Evolution Volume 8 written by Alan T. Zehnder and published by Springer. This book was released on 2016-09-20 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 8 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: In-situ Techniques for Fracture & Fatigue General Topics in Fracture & Fatigue Fracture & Fatigue of Composites Damage, Fracture, Fatigue & Durability Interfacial Effects in Fracture & Fatigue Damage Detection in Fracture & Fatigue

Download or read book Damage and Fracture of Heterogeneous Materials written by Leon L. Mishnaevsky Jr and published by CRC Press. This book was released on 1998-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work examines problems, particularly in mining and civil engineering, related to the destruction of heterogenous materials. It details the physical mechanisms of destruction, methods of damage and fracture modelling, and the application of models to the improvement of drilling efficiency.

Download or read book Damage Mechanics written by D. Krajcinovic and published by Elsevier. This book was released on 1996-04-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first truly comprehensive study of damage mechanics. All concepts are carefully identified and defined in micro- and macroscopic scales. In terms of the methods and observation scales, the main part of the book is divided into three chapters. These chapters consider the stochastic models applied to atomistic scale, micromechanical models (for arbitary concentrations of defects) on microscopic scale and continuum models on the macroscopic scale. It is intended for people who are doing or planning to do research in the mechanics and material science aspects of brittle deformation of solids with heterogeneous microstructure.

Download or read book Dynamic Web Programming and HTML5 written by Paul S. Wang and published by CRC Press. This book was released on 2012-11-21 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: With organizations and individuals increasingly dependent on the Web, the need for competent, well-trained Web developers and maintainers is growing. Helping readers master Web development, Dynamic Web Programming and HTML5 covers specific Web programming languages, APIs, and coding techniques and provides an in-depth understanding of the underlying concepts, theory, and principles. The author leads readers through page structuring, page layout/styling, user input processing, dynamic user interfaces, database-driven websites, and mobile website development. After an overview of the Web and Internet, the book focuses on the new HTML5 and its associated open Web platform standards. It covers the HTML5 markup language and DOM, new elements for structuring Web documents and forms, CSS3, and important JavaScript APIs associated with HTML5. Moving on to dynamic page generation and server-side programming with PHP, the text discusses page templates, form processing, session control, user login, database access, and server-side HTTP requests. It also explores more advanced topics such as XML and PHP/MySQL. Suitable for a one- or two-semester course at the advanced undergraduate or beginning graduate level, this comprehensive and up-to-date guide helps readers learn modern Web technologies and their practical applications. Numerous examples illustrate how the programming techniques and other elements work together to achieve practical goals. Online Resource Encouraging hands-on practice, the book’s companion website at http://dwp.sofpower.com helps readers gain experience with the technologies and techniques involved in building good sites. Maintained by the author, the site offers: Live examples organized by chapter and cross-referenced in the text Programs from the text bundled in a downloadable code package Searchable index and appendices Ample resource listings and information updates

Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2012-12-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.

Download or read book Frontiers of Performability Engineering written by Durga Rao Karanki and published by Springer Nature. This book was released on with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plasticity written by P.M. Dixit and published by CRC Press. This book was released on 2014-10-23 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the Principles of Plasticity Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications effectively addresses this need. This book fills a void by introducing the basic fundamentals of solid mechanics of deformable bodies. It provides a thorough understanding of plasticity theory, introduces the concepts of plasticity, and discusses relevant applications. Studies the Effects of Forces and Motions on Solids The authors make a point of highlighting the importance of plastic deformation, and also discuss the concepts of elasticity (for a clear understanding of plasticity, the elasticity theory must also be understood). In addition, they present information on updated Lagrangian and Eulerian formulations for the modeling of metal forming and machining. Topics covered include: Stress Strain Constitutive relations Fracture Anisotropy Contact problems Plasticity: Fundamentals and Applications enables students to understand the basic fundamentals of plasticity theory, effectively use commercial finite-element (FE) software, and eventually develop their own code. It also provides suitable reference material for mechanical/civil/aerospace engineers, material processing engineers, applied mechanics researchers, mathematicians, and other industry professionals.

Download or read book Industrial Communication Technology Handbook Second Edition written by Richard Zurawski and published by CRC Press. This book was released on 2014-11-07 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more. New to the Second Edition: 46 brand-new chapters and 21 substantially revised chapters Inclusion of the latest, most significant developments in specialized communication technologies and systems Addition of new application domains for specialized networks The Industrial Communication Technology Handbook, Second Edition supplies readers with a thorough understanding of the application-specific requirements for communication services and their supporting technologies. It is useful to a broad spectrum of professionals involved in the conception, design, development, standardization, and use of specialized communication networks as well as academic institutions engaged in engineering education and vocational training.

Download or read book Constitutive Models for Rubber III written by J. Busfield and published by CRC Press. This book was released on 2003-01-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the modelling of rubber are collated in this volume, including not only stress-strain behaviour and the use of the large strain finite element method for simulation, but also fatigue, fracture, filler reinforcement, dynamic properties and the effects of ageing.

Download or read book Frontiers of Rock Mechanics and Sustainable Development in the 21st Century written by Wang Sijing and published by CRC Press. This book was released on 2020-12-17 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the scientific contributions presented at the 2nd Asian Rock Mechanics Symposium (ISRM 2001 - 2nd ARMS). The theme of the symposium was "Frontiers of Rock Mechanics and Sustainable Development in the 21st Century".

Download or read book Advances in Multiaxial Fatigue written by David L. McDowell and published by ASTM International. This book was released on 1993 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca

Download or read book Materials Science and Engineering Applications written by Guojun Zhang and published by Trans Tech Publications Ltd. This book was released on 2010-11-11 with total page 1998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Materials science is an interdisciplinary field which involves the study of the properties of matter and the exploitation of those properties in various areas of science and engineering. It investigates the relationship between the structure of a material at the atomic or molecular scale and its resultant macroscopic properties. This three-volume set provided an international forum for the publication of theoretical and experimental studies related to the load-bearing capacity of materials, as influenced by their basic properties, processing history, microstructure and operating environment.

Download or read book High Temperature Mechanical Hysteresis in Ceramic Matrix Composites written by Longbiao Li and published by CRC Press. This book was released on 2022-08-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on mechanical hysteresis behavior in different fiber-reinforced ceramic-matrix composites (CMCs), including 1D minicomposites, 1D unidirectional, 2D cross-ply, 2D plain-woven, 2.5D woven, and 3D needle-punched composites. Ceramic-matrix composites (CMCs) are considered to be the lightweight high-temperature materials for hot-section components in aeroengines with the most potential. To improve the reliability and safety of CMC components during operation, it is necessary to conduct damage and failure mechanism analysis, and to develop models to predict this damage as well as fracture over lifetime - mechanical hysteresis is a key damage behavior in fiber-reinforced CMCs. The appearance of hysteresis is due to a composite’s internal damage mechanisms and modes, such as, matrix cracking, interface debonding, and fiber failure. Micromechanical damage models and constitutive models are developed to predict mechanical hysteresis in different CMCs. Effects of a composite’s constituent properties, stress level, and the damage states of the mechanical hysteresis behavior of CMCs are also discussed. This book also covers damage mechanisms, damage models and micromechanical constitutive models for the mechanical hysteresis of CMCs. This book will be a great resource for students, scholars, material scientists and engineering designers who would like to understand and master the mechanical hysteresis behavior of fiber-reinforced CMCs.

Download or read book Deformation Based Processing of Materials written by Heng Li and published by Elsevier. This book was released on 2019-03-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation Based Processing of Materials: Behavior, Performance, Modeling and Control focuses on deformation based process behaviors and process performance in terms of the quality of the needed shape, geometries, and the requested properties of the deformed products. In addition, modelling and simulation is covered to create an in-depth and epistemological understanding of the process. Other topics discussed include ways to efficiently reduce or avoid defects and effectively improve the quality of deformed parts. The book is ideal as a technical document, but also serves as scientific literature for engineers, scientists, academics, research students and management professionals involved in deformation based materials processing.

Download or read book Computational Modelling of Objects Represented in Images III written by Paolo Di Giamberardino and published by CRC Press. This book was released on 2012-08-24 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Objects Represented in Images: Fundamentals, Methods and Applications III contains all contributions presented at the International Symposium CompIMAGE 2012 - Computational Modelling of Object Presented in Images: Fundamentals, Methods and Applications (Rome, Italy, 5-7 September 2012). The contributions cover the state-o

Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.

Download or read book Fatigue 96 written by G. Lütjering and published by Elsevier. This book was released on 1996-05-20 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the 6th International Fatigue Congress, besides covering the entire field of fatigue, was to promote the intimate connection between basic science and engineering application by the selection of appropriate session topics.Fatigue is the main cause of failure of engineering structures and components. Making reliable fatigue predictions is highly difficult because knowledge about fatigue mechanisms in all stages of the fatigue process must be developed much further. In addition, the decreasing availability of raw materials and energy resources forces engineers to continually reduce the weight of constructions. This congress presents research results also particularly for new materials, including composites. Researchers, on the other hand, are confronted with the engineering demands. Futhermore, the overwhelming development which is presently taking place in the field of computer software and hardware dealing with fatigue problems is outlined along with the directions of future developments in all areas of fatigue.Close to 300 fully peer-reviewed papers are published in the proceedings, including nearly 30 overview and keynote papers covering the various session topics. The proceedings should therefore serve as a comprehensive review of the fatigue field at the present state-of-the-art, suitable for scientists, engineers and students.