Download or read book Cumulative Axial and Torsional Fatigue written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-06 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NASA Technical Reports Server (NTRS) houses half a million publications that are a valuable means of information to researchers, teachers, students, and the general public. These documents are all aerospace related with much scientific and technical information created or funded by NASA. Some types of documents include conference papers, research reports, meeting papers, journal articles and more. This is one of those documents.
Download or read book An Assessment of Cumulative Axial and Torsional Fatigue in a Cobalt Base Superalloy written by Sreeramesh Kalluri and published by . This book was released on 2010 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cumulative fatigue under axial and torsional loading conditions can include both load-order (high/low and low/high) as well as load-type sequence (axial/torsional and torsional/axial) effects. Previously reported experimental studies on a cobalt-base superalloy, Haynes 188 at 538°C, addressed these effects. These studies characterized the cumulative axial and torsional fatigue behavior under high amplitude followed by low amplitude (Kalluri, S. and Bonacuse, P. J., "Cumulative Axial and Torsional Fatigue: An Investigation of Load-Type Sequence Effects," in Multiaxial Fatigue and Deformation: Testing and Prediction, ASTM STP 1387, S. Kalluri, and P. J. Bonacuse, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2000, pp. 281-301) and low amplitude followed by high amplitude (Bonacuse, P. and Kalluri, S. "Sequenced Axial and Torsional Cumulative Fatigue: Low Amplitude Followed by High Amplitude Loading," Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, A. Carpinteri, M. De Freitas, and A. Spagnoli, Eds., Elsevier, New York, 2003, pp. 165-182) conditions. In both studies, experiments with the following four load-type sequences were performed: (a) axial/axial, (b) torsional/torsional, (c) axial/torsional, and (d) torsional/axial. In this paper, the cumulative axial and torsional fatigue data generated in the two previous studies are combined to generate a comprehensive cumulative fatigue database on both the load-order and load-type sequence effects. This comprehensive database is used to examine applicability of the Palmgren-Langer-Miner linear damage rule and a nonlinear damage curve approach for Haynes 188 subjected to the load-order and load-type sequencing described above. Summations of life fractions from the experiments are compared to the predictions from both the linear and nonlinear cumulative fatigue damage approaches. The significance of load-order versus load-type sequence effects for axial and torsional loading conditions is discussed. Possible reasons for the observed differences between the computed and observed summations of cycle fractions are rationalized in terms of the observed evolutions of cyclic axial and shear stress ranges in the cumulative fatigue tests.
Download or read book Cumulative Axial and Torsional Fatigue written by S. Kalluri and published by . This book was released on 2000 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cumulative fatigue behavior of a wrought cobalt-base superalloy, Haynes 188, was investigated at 538°C under various single-step sequences of axial and torsional loading conditions. Initially, fully-reversed, axial and torsional fatigue tests were conducted under strain control at 538°C on thin-walled tubular specimens to establish baseline fatigue life relationships. Subsequently, four sequences (axial/axial, torsional/torsional, axial/torsional, and torsional/axial) of two load-level fatigue tests were conducted to characterize both the load-order (high/low) and load-type sequencing effects. For the two load-level tests, summations of life fractions and the remaining fatigue lives at the second load level were computed by the Miner's linear damage rule (LDR) and a nonlinear damage curve approach (DCA). In general, for all four cases predictions by LDR were unconservative. Predictions by the DCA were within a factor of two of the experimentally observed fatigue lives for a majority of the cumulative axial and torsional fatigue tests.
Download or read book Multiaxial Fatigue and Deformation written by Sreeramesh Kalluri and published by ASTM International. This book was released on 2000 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1999 symposium, describing state-of-the-art multiaxial testing techniques and analytical methods for characterizing fatigue and deformation behaviors of engineering materials. Papers are classified into sections on multiaxial strength of materials, multiaxial deformation,
Download or read book Axial torsional Fatigue A Study of Tubular Specimen Thickness Effects written by and published by . This book was released on 1990 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book In phase and Out of phase Axial torsional Fatigue Behavior of Haynes 188 at 760 C written by and published by . This book was released on 1991 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure criteria and cumulative damage in fatigue under multi axial stress conditions written by Donald Lawson McDiarmid and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatique and Fracture Mechanics written by Gary R. Halford and published by ASTM International. This book was released on 2000 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of a Double Linear Damage Rule to Cumulative Fatigue written by S. S. Manson and published by . This book was released on 1967 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elevated Temperature Axial and Torsional Fatigue Behavior of Haynes 188 written by and published by . This book was released on 1992 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties and Performance of Engineering Ceramics II Volume 27 Issue 2 written by Rajan Tandon and published by John Wiley & Sons. This book was released on 2009-09-29 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains over 70 papers on advanced research and development of processing, mechanical properties and mechanics of ceramics and composites from the proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, in Cocoa Beach, Florida. The conference was organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division. It covers underlying fundamental links between microstructure and properties, and the ability to achieve desired multifunctional properties through innovative processing techniques.
Download or read book Axial Torsional Fatigue written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-16 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: A room-temperature experimental program was conducted on AISI type 316 stainless steel to determine the effect of wall thickness on the cyclic deformation behavior and fatigue life of thin-wall, tubular, axial-torsional fatigue specimens. The following experimental variables were examined in this study: the depth of the surface work-hardened layer produced in specimen machining, and the effects of strain range and axial-torsional strain phasing. Tubular fatigue specimens were fabricated with wall thicknesses of 1.5, 2.0, and 2.5 mm. One as-fabricated specimen from each wall thickness was sectioned for microstructural examination and microhardness measurement. A specimen of each wall thickness was tested at each of three conditions - high strain range in-phase, low strain range in-phase, and low strain range out-of-phase - for a total of nine axial-torsional fatigue experiments. The machining-induced work-hardened zone, as a percentage of the gage section material, was found to have a minimal effect on both deformation behavior and fatigue life. Also, little or no variation in fatigue life or deformation behavior as a function of wall thickness was observed. Out-of-phase fatigue tests displayed shorter fatigue lives and more cyclic hardening than in-phase tests. Bonacuse, Peter J. and Kalluri, Sreeramesh Glenn Research Center NASA-TM-103637, E-5814, NAS 1.15:103637, AVSCOM-TM-90-C-014, AD-A231725 RTOP 505-63-1B...
Download or read book Multiaxial Fatigue written by Keith John Miller and published by ASTM International. This book was released on 1985 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Testing and Analysis of Results written by W. Weibull and published by Elsevier. This book was released on 2013-10-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis of Results discusses fundamental concepts of fatigue testing and results analysis. The book begins with a description of the symbols and nomenclature selected for the present book, mainly those proposed by the ASTM Committee E-9 on Fatigue. Fatigue testing methods are then discussed including routine tests, short-life and long-life tests, cumulative-damage tests, and abbreviated and accelerated tests. Separate chapters cover fatigue testing machines and equipment; instruments and measuring devices; and test pieces used in fatigue testing. The factors affecting test results are considered, including material, types of stressing, test machine, environment, and testing technique. The final two chapters cover the planning of test programs and the presentation of results. Test program planning involves the statistical design of a test series; specification and sampling of test pieces; and choice of test pieces, testing machines, and test conditions. The chief purpose of most fatigue tests is the experimental determination of the relation between the endurance and the magnitude of the applied stress range for the material and the specimen under consideration, and final results can be condensed into a table, graph, or analytical expression.
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book Axial and Torsional Fatigue Behavior of Waspaloy written by S. Y. Zamrik and published by . This book was released on 1986 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
