Download or read book Crystal Physics Macroscopic Physics of Anisotropic Solids written by Hellmut J. Juretschke and published by Addison Wesley Longman. This book was released on 1974 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Physics Macroscopic Physics of Anisotropic Solids written by Hellmut J. Juretschke and published by Addison Wesley Longman. This book was released on 1974-01-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Ferroic Materials written by Vinod Wadhawan and published by CRC Press. This book was released on 2000-12-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroic materials are important, not only because of the improved understanding of condensed matter, but also because of their present and potential device applications. This book presents a unified description of ferroic materials at an introductory level, with the unifying factor being the occurrence of nondisruptive phase transitions in crystals that alter point-group symmetry. The book also aims to further systemitize the subject of ferroic materials, employing some formal, carefully worded, definitions and classification schemes. The basic physical principles leading to the wide-ranging applications of ferroic materials are also explained, while placing extra emphasis on the utilitarian role of symmetry in materials science.
Download or read book Physical Properties of Crystals written by J. F. Nye and published by Oxford University Press. This book was released on 1985 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1957, this classic study has been reissued in a paperback version that includes an additional chapter bringing the material up to date. The author formulates the physical properties of crystals systematically in tensor notation, presenting tensor properties in terms of their common mathematical basis and the thermodynamic relations between them. The mathematical groundwork is laid in a discussion of tensors of the first and second ranks. Tensors of higher ranks and matrix methods are then introduced as natural developments of the theory. A similar pattern is followed in discussing thermodynamic and optical aspects.
Download or read book Properties of Materials written by Robert E. Newnham and published by Oxford University Press. This book was released on 2005 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystals are sometimes called 'Flowers of the Mineral Kingdom'. In addition to their great beauty, crystals and other textured materials are enormously useful in electronics, optics, acoustics and many other engineering applications. This richly illustrated text describes the underlying principles of crystal physics and chemistry, covering a wide range of topics and illustrating numerous applications in many fields of engineering using the most important materials today. Tensors, matrices, symmetry and structure-property relationships form the main subjects of the book. While tensors and matrices provide the mathematical framework for understanding anisotropy, on which the physical and chemical properties of crystals and textured materials often depend, atomistic arguments are also needed to quantify the property coefficients in various directions. The atomistic arguments are partly based on symmetry and partly on the basic physics and chemistry of materials. After introducing the point groups appropriate for single crystals, textured materials and ordered magnetic structures, the directional properties of many different materials are described: linear and nonlinear elasticity, piezoelectricity and electrostriction, magnetic phenomena, diffusion and other transport properties, and both primary and secondary ferroic behavior. With crystal optics (its roots in classical mineralogy) having become an important component of the information age, nonlinear optics is described along with the piexo-optics, magneto-optics, and analogous linear and nonlinear acoustic wave phenomena. Enantiomorphism, optical activity, and chemical anisotropy are discussed in the final chapters of the book.
Download or read book Physical Optics written by Alan Mickelson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present text has emerged from the lecture notes for a one semester, first year, graduate level course which has been offered yearly since fall 1985 here in the Electrical and Computer Engineering Department at the University of Colorado at Boulder. Enrollment in the course, however, has not been limited to first year graduate electrical engineering students, but has included seniors, as well as more advanced students, from a variety of disciplines including other areas of engineering and physics. Although other Physical Optics texts exist, the most up-to-date ones are written primarily for undergraduate courses. As is discussed in slightly more depth in the introduction in the beginning of Chap ter 1, up-to-dateness is important in a Physical Optics text, as even classical optics has been greatly rejuvenated by the events of the last 30 years, since the demonstration of the laser. The perception of this author is that the needs of a graduate level text are quite different from that of an undergraduate text. At the undergraduate level, one is generally pleased if the student can qualitatively grasp a portion of the concepts presented and have some recollection of where to look them up if need be later in his/her career. A deeper insight is necessary at the graduate level and is generally developed through qualitative analysis of the problems within the subject area.
Download or read book Introduction to Solid State Physics written by Charles Kittel and published by John Wiley & Sons. This book was released on 1976 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition over 50 years ago, Introduction to Solid State Physics has been the standard solid state physics text for physics students. The author's goal from the beginning has been to write a book that is accessible to undergraduates and consistently teachable. The emphasis in the book has always been on physics rather than formal mathematics. With each new edition, the author has attempted to add important new developments in the field without sacrificing the book's accessibility and teachability. * A very important chapter on nanophysics has been written by an active worker in the field. This field is the liveliest addition to solid state science during the past ten years * The text uses the simplifications made possible by the wide availability of computer technology. Searches using keywords on a search engine (such as Google) easily generate many fresh and useful references
Download or read book Physics of Liquid Crystalline Materials written by Chor-San Heng Khoo and published by CRC Press. This book was released on 1991-12-16 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is based on lectures delivered at the "summer school" held in October 1988. Papers deal with microscopic properties, collective phenomena (elastic properties, hydrodynamics, linear and nonlinear optics . . . ), and such diverse topics as NMR studies of liquid crystals, orientational disorder and dynamics, rheology of layered liquid crystals, light scattering. Minimal index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Photoelastic and Electro Optic Properties of Crystals written by T. S. Narasimhamurty and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatise reviews, for the first time, all the essential work over the past 160 years on the photoelastic and the closely related linear and quadratic electro-optic effects in isotropic and crystalline mate rials. Emphasis is placed on the phenomenal growth of the subject during the past decade and a half with the advent of the laser, with the use of high-frequency acousto-optic and electro-optic techniques, and with the discovery of new piezoelectric materials, all of which have offered a feedback to the wide interest in these two areas of solid-state physics. The first of these subjects, the photoelastic effect, was discovered by Sir David Brewster in 1815. He first found the effect in gels and subsequently found it in glasses and crystals. While the effect remained of academic interest for nearly a hundred years, it became of practical value when Coker and Filon applied it to measuring stresses in machine parts. With one photograph and subsequent analysis, the stress in any planar model can be determined. By taking sections of a three-dimensional model, complete three-dimensional stresses can be found. Hence this effect is widely applied in industry.
Download or read book Electromagnetic Waves written by Carlo G. Someda and published by CRC Press. This book was released on 2017-12-19 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adapted from a successful and thoroughly field-tested Italian text, the first edition of Electromagnetic Waves was very well received. Its broad, integrated coverage of electromagnetic waves and their applications forms the cornerstone on which the author based this second edition. Working from Maxwell's equations to applications in optical communications and photonics, Electromagnetic Waves, Second Edition forges a link between basic physics and real-life problems in wave propagation and radiation. Accomplished researcher and educator Carlo G. Someda uses a modern approach to the subject. Unlike other books in the field, it surveys all major areas of electromagnetic waves in a single treatment. The book begins with a detailed treatment of the mathematics of Maxwell's equations. It follows with a discussion of polarization, delves into propagation in various media, devotes four chapters to guided propagation, links the concepts to practical applications, and concludes with radiation, diffraction, coherence, and radiation statistics. This edition features many new and reworked problems, updated references and suggestions for further reading, a completely revised appendix on Bessel functions, and new definitions such as antenna effective height. Illustrating the concepts with examples in every chapter, Electromagnetic Waves, Second Edition is an ideal introduction for those new to the field as well as a convenient reference for seasoned professionals.
Download or read book Susceptibility Tensors for Nonlinear Optics written by S.V Popov and published by Routledge. This book was released on 2017-07-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Susceptibility Tensors for Nonlinear Optics is a unique and invaluable reference book with accompanying software. Starting from basic principles, the book presents a detailed introduction to the concept of optical susceptibilities of crystalline media. Substantial appendices include useful tables of third-, fourth-, and fifth-rank susceptibility tensors for major nonlinear optical effects. Integral to the book is an entirely original TURBO RANK software package (compatible with PCs running MS-DOS and Windows) that allows the calculation of the symmetry of material tensors up to seventh rank, effectively superseding conventional reference tables of high rank tensors. This package is also useful for scientists working in solid state physics, crystallography, acoustics, and materials engineering.
Download or read book Solid Phase Transformations written by Jiří Čermák and published by Trans Tech Publications Ltd. This book was released on 2008-03-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume, invited papers only
Download or read book Laser Materials written by Fuxi Gan and published by World Scientific. This book was released on 1995 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses mainly on the spectroscopy of laser materials, physics of laser materials, laser crystals and laser glasses. The spectroscopic and laser properties of rare earth and transition metal ion-doped solid state materials are systematically described based on modern quantum optics. The aim of this book is to relate the laser and spectroscopic properties to the structure and chemical composition of materials. It emphasises the nonlinear optical effects in laser materials, which are widely used in high power laser systems. The development of advanced solid state laser devices depends greatly on new laser materials. Much progress has been made recently in the development of new laser materials, and this is summarized in the book.
Download or read book The Physics of Living Systems written by Fabrizio Cleri and published by Springer. This book was released on 2016-10-08 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, physics in its many aspects (thermodynamics, mechanics, electricity, fluid dynamics) is the guiding light on a fascinating journey through biological systems, providing ideas, examples and stimulating reflections for undergraduate physics, chemistry and life-science students, as well as for anyone interested in the frontiers between physics and biology. Rather than introducing a lot of new information, it encourages young students to use their recently acquired knowledge to start seeing the physics behind the biology. As an undergraduate textbook in introductory biophysics, it includes the necessary background and tools, including exercises and appendices, to form a progressive course. In this case, the chapters can be used in the order proposed, possibly split between two semesters. The book is also an absorbing read for researchers in the life sciences who wish to refresh or go deeper into the physics concepts gleaned in their early years of scientific training. Less physics-oriented readers might want to skip the first chapter, as well as all the "gray boxes" containing the more formal developments, and create their own á-la-carte menu of chapters.
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1976 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystals X rays and Proteins written by Dennis Sherwood and published by Oxford University Press. This book was released on 2011 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information derived from X-ray crystal structures of biological molecules allows us to explain their functions in living organisms in extraordinary detail, and to develop drugs to treat disease. This book describes the principles and practice of X-ray diffraction as a key technique at the forefront of new discoveries in biology and medicine.
Download or read book Solid State Physics written by Mohammad Abdul Wahab and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Physics, a comprehensive study for the undergraduate and postgraduate students of pure and applied sciences, and engineering disciplines is divided into eighteen chapters. The First seven chapters deal with structure related aspects such as lattice and crystal structures, bonding, packing and diffusion of atoms followed by imperfections and lattice vibrations. Chapter eight deals mainly with experimental methods of determining structures of given materials. While the next nine chapters cover various physical properties of crystalline solids, the last chapter deals with the anisotropic properties of materials. This chapter has been added for benefit of readers to understand the crystal properties (anisotropic) in terms of some simple mathematical formulations such as tensor and matrix. New to the Second Edition: Chapter on: *Anisotropic Properties of Materials
