Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 1994 with total page 2106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1900 with total page 1762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Chemical Processing Equipment written by Nicholas P Cheremisinoff and published by Elsevier. This book was released on 2000-07-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Chemical Process Equipment is a major reference on process equipment. It provides practical understanding and description of the working principles, intended applications, selection criteria and fundamental design principles for equipment used throughout the process and allied chemical industries. It is an important reference for engineers, and in particular chemical engineers who will use such a volume throughout their studies and careers. Each major unit operation and equipment associated with the operation is described in sufficient detail for the reader to obtain practical knowledge of the equipment's limitations and typical applications. The book contains sufficient working examples and references for the user to refer to more in-depth treatment of individual subject areas. - A practical reference for chemical process equipment - Can be used throughout the process and allied chemical industries - Unit operations and equipment described in detail
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Natural Gas Transmission and Processing written by Saeid Mokhatab and published by Gulf Professional Publishing. This book was released on 2015-02-14 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an internationally-recognized author team of natural gas industry experts, the third edition of Handbook of Natural Gas Transmission and Processing is a unique, well-documented, and comprehensive work on the major aspects of natural gas transmission and processing. Two new chapters have been added to the new edition: a chapter on nitrogen rejection to address today's high nitrogen gases and a chapter on gas processing plant operations to assist plant operators with optimizing their plant operations. In addition, overall updates to Handbook of Natural Gas Transmission and Processing provide a fresh look at new technologies and opportunities for solving current gas processing problems on plant design and operation and on greenhouse gases emissions. It also does an excellent job of highlighting the key considerations that must be taken into account for any natural gas project in development. - Covers all technical and operational aspects of natural gas transmission and processing in detail. - Provides pivotal updates on the latest technologies, applications and solutions. - Offers practical advice on design and operation based on engineering principles and operating experiences.
Download or read book Cumulative Book Index written by and published by . This book was released on 1995 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: A world list of books in the English language.
Download or read book Proceedings of the 1st Annual Gas Processing Symposium written by Hassan E. Alfadala and published by Elsevier. This book was released on 2008-11-26 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the cleanest source of fossil energy with the most advantageous CO2 footprint, natural gas continues to increase its share in the global energy market. This book provides state-of-the-art contributions in the area of gas processing. Special emphasis is given to Liquified Natural Gas (LNG); the book also covers the following gas processing applications in parallel sessions:* Natural Gas processing and treatment * Gas To Power and water* Gas To Liquid (GTL)* Gas To Petrochemicals, including olefins, ammonia and methanol* Provides a state-of-the-art review of gas processing technologies* Covers design, operating tools, and methodologies* Includes case studies and practical applications
Download or read book Guide to Cleaner Technologies written by and published by . This book was released on 1994 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Process Equipment written by James R. Couper and published by Elsevier. This book was released on 2012-12-06 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Process Equipment is a results-oriented reference for engineers who specify, design, maintain or run chemical and process plants. This book delivers information on the selection, sizing and operation of process equipment in a format that enables quick and accurate decision making on standard process and equipment choices, saving time, improving productivity, and building understanding. Coverage emphasizes common real-world equipment design rather than experimental or esoteric and focuses on maximizing performance. - Legacy reference for chemical and related engineers who work with vendors to design, specify and make final equipment selection decisions - Copious examples of successful applications, with supporting schematics and data to illustrate the functioning and performance of equipment - Provides equipment rating forms and manufacturers' data, worked examples, valuable shortcut methods, and rules of thumb to demonstrate and support the design process - Heavily illustrated with line drawings and schematics to aid understanding, as well as graphs and tables to illustrate performance data
Download or read book Books in Print written by and published by . This book was released on 1994 with total page 2132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subject Guide to Books in Print written by and published by . This book was released on 1996 with total page 2476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Gas Handbook written by Frank G. Kerry and published by CRC Press. This book was released on 2007-02-22 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on Frank G. Kerry's more than 60 years of experience as a practicing engineer, the Industrial Gas Handbook: Gas Separation and Purification provides from-the-trenches advice that helps practicing engineers master and advance in the field. It offers detailed discussions and up-to-date approaches to process cycles for cryogenic separation of
Download or read book Cryogenic Safety written by Thomas J. Peterson and published by Springer. This book was released on 2019-04-26 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the current state of the art in cryogenic safety best practice, helping the reader to work with cryogenic systems and materials safely. It brings together information from previous texts, industrial and laboratory safety polices, and recent research papers. Case studies, example problems, and an extensive list of references are included to add to the utility of the text. It describes the unique safety hazards posed by cryogenics in all its guises, including issues associated with the extreme cold of cryogenics, the flammability of some cryogenic fluids, the displacement of oxygen by inert gases boiling off from cryogenic fluids, and the high pressures that can be formed during the volume expansion that occurs when a cryogenic fluid becomes a room temperature gas. A further chapter considers the challenges arising from the behavior of materials at cryogenic temperatures. Many materials are inappropriate for use in cryogenics and can fail, resulting in hazardous conditions. Despite these hazards, work at cryogenic temperatures can be performed safely. The book also discusses broader safety issues such as hazard analysis, establishment of a safe work culture and lessons learned from cryogenic safety in accelerator labs. This book is designed to be useful to everyone affected by cryogenic hazards regardless of their expertise in cryogenics.
Download or read book Operations in Food Refrigeration written by Rodolfo H. Mascheroni and published by CRC Press. This book was released on 2012-06-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The final quality of a food product is impacted heavily by preservation technologies, such as chilling, freezing, and freeze-drying, as well as the numerous pretreatments that are routinely applied to foods. Adequate design and implementation of each of these treatments are critical to ensuring the integrity of the final food product, the productivity of the equipment, and reduced operation costs. Operations in Food Refrigeration explores the fundamental issues involved in heat and mass transfer in food refrigeration and examines aspects of other operations applied to chilled or frozen foods. Following an overview of basic concepts and general calculation procedures involved in cooling, freezing, thawing, and freeze-drying, the book discusses: Sizing, peeling, cutting, sorting, and blanching fruits and vegetables Pretreatments for meats, including tenderization, electrical stimulation, portioning, curing, and smoking Pretreatments for fish and other seafood Processing of poultry Air and osmotic partial dehydration, infusion of special nutrients, and the concentration of juices Traditional chilling and freezing methods Special precooling and freezing techniques The effects of thawing on food, factors that influence the choice and design of thawing processes, and various thawing methods Freeze-drying equipment Each chapter is written by a recognized specialist and can serve as a stand-alone resource for the particular topic. Several chapters present case studies that can be used for developing processes or in teaching applications. Processors, researchers, and educators in the food industry will find this volume to be an invaluable reference for a host of food operations.
Download or read book Cryogenic Engineering written by Klaus D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a benchmark reference work on Cryogenic Engineering which chronicles the major developments in the field. Starting with an historical background, this book reviews the development of data resources now available for cryogenic fields and properties of materials. It presents the latest changes in cryopreservation and the advances over the past 50 years. The book also highlights an exceptional reference listing to provide referral to more details.
Download or read book Code of Massachusetts regulations 1993 written by and published by . This book was released on 1993 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Archival snapshot of entire looseleaf Code of Massachusetts Regulations held by the Social Law Library of Massachusetts as of January 2020.
