Download or read book Cross Correlation Flowmeters Their Design and Application written by Maurice S. Beck and published by CRC Press. This book was released on 1987 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by two acknowledged experts covers the general scientific principles, the design and the application of industrial cross correlation flowmeters. Intended for engineers and scientists concerned with fluid flow, control and instrumentation systems in industry; electronics and other engineers concerned with instrumentation in the nuclear industry, the process industry, research centres, contracting firms for offshore and land-based operations concerned with process technology, also students on MSc courses on instrumentation and control, and undergraduates whose course has a high content of these subjects.
Download or read book Flow Measurement written by Bela G. Liptak and published by CRC Press. This book was released on 2020-06-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully illustrated with diagrams, tables, and formulas, Flow Measurement covers virtually every type of flow meter in use today. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Measurement and Safety written by Béla G. Lipták and published by CRC Press. This book was released on 2016-11-25 with total page 2226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is dedicated to the next generation of automation engineers working in the fields of measurement, control, and safety, describing the sensors and detectors used in the measurement of process variables.
Download or read book Fluid Mechanics of Flow Metering written by Wolfgang Merzkirch and published by Springer Science & Business Media. This book was released on 2005 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow meters measure the volumetric flow rate in a pipeline. Most meters are based on deriving a signal from the fluid flow and calibrating the signal against the volumetric flow rate. The calibration is done in fully-developed flow, and the same state of flow must exist at the meter’s position when it is in practical use. Because the field of flow metering has been neglected by fluid mechanicists for a long time, this book addresses two major fluid mechanical problems in flow metering: the analysis of signal generation in turbulent pipe flow, which explains the function of the meter beyond a simple calibration, and the possible use of a meter in non-developed flows. These problems are investigated with reference to, and examples from, a variety of meters, e.g. ultrasound cross-correlation meters, vortex meters, and turbine meters. Studying these problems requires consideration of specific phenomena in turbulent non-developed pipe flow, as caused by installations, and finding special solutions with signal processing, both of which are included in the book.
Download or read book Flow Measurement Handbook written by Roger C. Baker and published by Cambridge University Press. This book was released on 2016-08-25 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow Measurement Handbook is a reference for engineers on flow measurement techniques and instruments. It strikes a balance between laboratory ideas and the realities of field experience and provides practical advice on design, operation and performance of flowmeters. It begins with a review of essentials: accuracy, flow, selection and calibration methods. Each chapter is then devoted to a flowmeter class and includes information on design, application installation, calibration and operation. Among the flowmeters discussed are differential pressure devices such as orifice and Venturi, volumetric flowmeters such as positive displacement, turbine, vortex, electromagnetic, magnetic resonance, ultrasonic, acoustic, multiphase flowmeters and mass meters, such as thermal and Coriolis. There are also chapters on probes, verification and remote data access.
Download or read book Instrument and Automation Engineers Handbook written by Bela G. Liptak and published by CRC Press. This book was released on 2022-08-31 with total page 3560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Instrument and Automation Engineers’ Handbook (IAEH) is the Number 1 process automation handbook in the world. The two volumes in this greatly expanded Fifth Edition deal with measurement devices and analyzers. Volume one, Measurement and Safety, covers safety sensors and the detectors of physical properties, while volume two, Analysis and Analysis, describes the measurement of such analytical properties as composition. Complete with 245 alphabetized chapters and a thorough index for quick access to specific information, the IAEH, Fifth Edition is a must-have reference for instrument and automation engineers working in the chemical, oil/gas, pharmaceutical, pollution, energy, plastics, paper, wastewater, food, etc. industries.
Download or read book written by E. A. Parr and published by Industrial Press Inc.. This book was released on 1998 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Control Handbook has become a standard reference work for practicing engineers-and unlike many reference works it really is used! If you are a maintenance engineer trying to solve a problem the Industrial Control Handbook could save you from mental meltdown. Equally, if you want to work out practical solutions without recourse to advanced mathematics this is the book or you.
Download or read book Intelligent Instrumentation written by Manabendra Bhuyan and published by CRC Press. This book was released on 2010-11-17 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of microprocessors and digital-processing technologies as catalyst, classical sensors capable of simple signal conditioning operations have evolved rapidly to take on higher and more specialized functions including validation, compensation, and classification. This new category of sensor expands the scope of incorporating intelligence into instrumentation systems, yet with such rapid changes, there has developed no universal standard for design, definition, or requirement with which to unify intelligent instrumentation. Explaining the underlying design methodologies of intelligent instrumentation, Intelligent Instrumentation: Principles and Applications provides a comprehensive and authoritative resource on the scientific foundations from which to coordinate and advance the field. Employing a textbook-like language, this book translates methodologies to more than 80 numerical examples, and provides applications in 14 case studies for a complete and working understanding of the material. Beginning with a brief introduction to the basic concepts of process, process parameters, sensors and transducers, and classification of transducers, the book describes the performance characteristics of instrumentation and measurement systems and discusses static and dynamic characteristics, various types of sensor signals, and the concepts of signal representations, various transforms, and their operations in both static and dynamic conditions. It describes smart sensors, cogent sensors, soft sensors, self-validating sensors, VLSI sensors, temperature-compensating sensors, microcontrollers and ANN-based sensors, and indirect measurement sensors. The author examines intelligent sensor signal conditioning such as calibration, linearization, and compensation, along with a wide variety of calibration and linearization techniques using circuits, analog-to-digital converters (ADCs), microcontrollers, ANNs, and software. The final chapters highlight ANN techniques for pattern classification, recognition, prognostic diagnosis, fault detection, linearization, and calibration as well as important interfacing protocols in the wireless networking platform.
Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Download or read book Multiphase Flow Handbook written by Clayton T. Crowe and published by CRC Press. This book was released on 2005-09-19 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the importance of multiphase flows in a wide variety of industries, including power, petroleum, and numerous processing industries, an understanding of the behavior and underlying theoretical concepts of these systems is critical. Contributed by a team of prominent experts led by a specialist with more than thirty years of experience, the Multiphase Flow Handbook provides such an understanding, and much more. It covers all aspects of multiphase flows, from fundamentals to numerical methods and instrumentation. The book begins with an introduction to the fundamentals of particle/fluid/bubble interactions followed by gas/liquid flows and methods for calculating system parameters. It includes up-to-date information on practical industrial applications such as boiling and condensation, fluidized beds, aerosols, separation systems, pollution control, granular and porous media flow, pneumatic and slurry transport, and sprays. Coverage then turns to the most recent information on particle/droplet-fluid interactions, with a chapter devoted to microgravity and microscale flows and another on basic multiphase interactions. Rounding out the presentation, the authors discuss numerical methods, state-of-the art instrumentation, and advanced experimental techniques. Supplying up-to-date, authoritative information on all aspects of multiphase flows along with numerous problems and examples, the Multiphase Flow Handbook is the most complete reference available for understanding the flow of multiphase mixtures.
Download or read book Imaging Industrial Flows written by A Plaskowski and published by CRC Press. This book was released on 1995-01-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first authoritative account of the industrial potential of tomographic imaging techniques, Imaging Industrial Flows: Applications of Electrical Process Tomography provides an overview of the instrumentation used in process tomography. Assuming only a basic knowledge of instrumentation, electronics, and computing systems, the authors concisely describe the principles behind the operation of image reconstruction techniques and the application of electrical tomography to measuring flows in pipelines and other industrial equipment. This reference will help you improve the efficiency of measurement and control equipment, monitor industrial effluents, and increase the efficiency and safety of process plant equipment, in particular, in the chemical engineering, oil technology, and flow measurement instrumentation industries.
Download or read book From Instrumentation to Nanotechnology written by J.W. Gardner and published by CRC Press. This book was released on 2024-11-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to physical and chemical scientists and engineers, this book provides information on the design, manufacture, and assessment of components with critical dimensions or critical tolerances in the 0.1-100 nanometer range. Such tiny parts are now used in automobile engines, cassette players, and other common products. The 16 lectures presented are from an advanced vacation school on instrumentation and nanotechnology in Warwick, England, September 1990. Among the topics are signal processing, ultrasonic sensors, and nanoactuators for controlled displacements. .
Download or read book Instrumentation and Sensors for the Food Industry written by E Kress-Rogers and published by Elsevier. This book was released on 2001-10-03 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book quickly established itself as the standard reference in its field, and the second edition consolidates this reputation. Keeping up with the rapid change in this area, there are 16 new contributors and 8 completely new chapters, as well as major revisions to existing chapters, making this second edition a substantially longer book.Instrumentation and sensors for the food industry 2nd edition begins with two introductory chapters to set the scene, part one covers in-line measurement of food processing operations, including colour measurement, the measurement of food composition by a range of techniques, and the measurement of pressure, temperature, level, flow and viscosity. Part two reviews instrumental techniques in the quality control laboratory, including the measurement of rheological properties, texture, water and microbiological activity. Part thee has five chapters devoted to the increasingly widespread use of electronic noses, chemosensors, biosensors, immunosensors and DNA probes. - Comprehensively revised and expanded edition of a standard work in its field - Authoritative and practical guide to the range of instrumentation and sensors available - Written by a distinguished international panel of experts
Download or read book Workshop on Higher Order Spectral Analysis written by and published by . This book was released on 1989 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Emission written by Wojciech Sikorski and published by BoD – Books on Demand. This book was released on 2012-03-02 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic emission (AE) is one of the most important non-destructive testing (NDT) methods for materials, constructions and machines. Acoustic emission is defined as the transient elastic energy that is spontaneously released when materials undergo deformation, fracture, or both. This interdisciplinary book consists of 17 chapters, which widely discuss the most important applications of AE method as machinery and civil structures condition assessment, fatigue and fracture materials research, detection of material defects and deformations, diagnostics of cutting tools and machine cutting process, monitoring of stress and ageing in materials, research, chemical reactions and phase transitions research, and earthquake prediction.
Download or read book Multiphase Flows with Droplets and Particles Second Edition written by Clayton T. Crowe and published by CRC Press. This book was released on 2011-08-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Multiphase Flow with Droplets and Particles, there have been significant advances in science and engineering applications of multiphase fluid flow. Maintaining the pedagogical approach that made the first edition so popular, this second edition provides a background in this important area of fluid mechanics to those new to the field and a resource to those actively involved in the design and development of multiphase systems. See what’s new in the Second Edition: Chapter on the latest developments in carrier-phase turbulence Extended chapter on numerical modeling that includes new formulations for turbulence and Reynolds stress models Review of the fundamental equations and the validity of the traditional "two-fluid" approach Expanded exercises and a solutions manual A quick look at the table of contents supplies a snapshot of the breadth and depth of coverage found in this completely revised and updated text. Suitable for a first-year graduate (5th year) course as well as a reference for engineers and scientists, the book is clearly written and provides an essential presentation of key topics in the study of gas-particle and gas-droplet flows.
Download or read book Proceedings of the ASME JSME Joint Fluids Engineering Conference written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
