Download or read book Critical Temperatures for the Thermal Explosion of Chemicals written by Takashi Kotoyori and published by Elsevier. This book was released on 2011-08-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the critical temperature (Tc), below which the thermal explosion of a chemical cannot occur, is indispensable to prevent such a chemical from exploding. In order to determine the Tc it has so far been necessary to measure the value in explosion experiments. Because of the inherent hazards, only few Tc values are available at present. Critical Temperatures for the Thermal Explosion of Chemicals introduces new and simple procedures to calculate the Tc. As a result Tc can be calculated for a range of chemicals, many of which are listed in this new volume. The calculated values of Tc are shown to be in agreement with experimentally determined values. The data and methods presented in Critical Temperatures for the Thermal Explosion of Chemicals will be of use to research laboratories as well as in the chemical industry. Introduces new and simple procedures for calculating critical temperatures Lists the T(c) values of chemicals in tables Explains mathematical expressions in clear simple terms
Download or read book Introduction to Physics and Chemistry of Combustion written by Michael A. Liberman and published by Springer Science & Business Media. This book was released on 2010-03-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the material covered in this book deals with the fundamentals of chemistry and physics of key processes and fundamental mechanisms for various combustion and combustion related phenomena in gaseous combustible mixture. It provides the reader with basic knowledge of burning processes and mechanisms of reaction wave propagation. The combustion of a gas mixture (flame, explosion, detonation) is necessarily accompanied by motion of the gas. The process of combustion is therefore not only a chemical phenomenon but also one of gas dynamics. The material selection focuses on the gas phase and with premixed gas combustion. Premixed gas combustion is of practical importance in engines, modern gas turbine and explosions, where the fuel and air are essentially premixed, and combustion occurs by the propagation of a front separating unburned mixture from fully burned mixture. Since premixed combustion is the most fundamental and potential for practical applications, the emphasis in the present work is be placed on regimes of premixed combustion. This text is intended for graduate students of different specialties, including physics, chemistry, mechanical engineering, computer science, mathematics and astrophysics.
Download or read book Physical and Chemical Processes in Gas Dynamicsphysical and Chemical Kinet Ics and Thermodynamics written by G. G. Chernyi and published by AIAA. This book was released on 2004 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Reaction Hazards written by John Barton and published by Gulf Professional Publishing. This book was released on 1997-02-27 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition of a best-selling book continues to provide a basis for the identification and evaluation of chemical reaction hazards for chemists, engineers, plant personnel, and students. Before undertaking the design of a chemical manufacturing process it is vital that the chemical reactions involved be fully understood, potential hazards assessed, and safety measures planned. Chemical Reaction Hazards aims to help the people responsible for this design and operation to meet the general duties of safety. Two major additions to this revised book are the appendices. One of these describes 100 incidents, illustrating their cause and indicating consequences if appropriate procedures within this guide are not followed. The second provides a practical example of a typical chemical reaction hazard assessment, from consideration of the process description, through experimental testing to the specification of safety measures.
Download or read book Thermal Safety of Chemical Processes written by Francis Stoessel and published by John Wiley & Sons. This book was released on 2021-05-24 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vollständig überarbeitete,aktualisierte 2. Auflage mit fünf neuen Kapiteln und den aktuellen IUPAC-Normen. Beschäftigt sich mit thermischen Risiken in der chemischen Prozessindustrie. Jedes Kapitel beginnt mit einer Fallstudie und den aus Zwischenfällen gewonnen Erkenntnissen.
Download or read book NASA Technical Translation written by and published by . This book was released on 1971 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosives written by Rudolf Meyer and published by John Wiley & Sons. This book was released on 2016-05-09 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unrivaled, definitive reference for almost 40 years, this classic work on explosives is now in its seventh, completely revised and updated edition. Some 500 monographic entries, arranged alphabetically, consider the physicochemical properties, production methods, and safe applications of over 120 explosive chemicals. In addition, 70 fuels, additives, and oxidizing agents are discussed as well as the corresponding test methods. Trade, company, and military short names are provided for many of the materials listed, while further key features include a combined index and glossary with terms and abbreviations in English, French, and German, as well as conversion tables and many literature references. Finally, this indispensable source also contains safety data and transport regulations.
Download or read book Chemistry and Physics of Energetic Materials written by S.N. Bulusu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of lectures presented at the NATO Advanced study Institute(ASI) on "Chemistry & Physics of the Molecular Processes in Energetic Materials", held at Hotel Torre Normanna, Altavilla Milicia, Sicily, Italy, September 3 to 15, 1989. The institute was attended by seventy participants including twenty lecturers, drawn from thirteen countries. The purpose of the institute was to review the major ad vances made in recent years in the theoretical and experi mental aspects of explosives and propellants. In accordance with the format of the NATO ASI, it was arranged to have a relatively small number of speakers to present in depth, re view type lectures emphasizing the basic research aspects of the subject, over a two week period. Most of the speakers gave two lectures, each in excess of one hour with addition al time for discussions. The scope of the meeting was limit ed to molecular and spectroscopic studies since the hydro dynamic aspects of detonation and various performance crite ria of energetic materials are often covered adequately in other international meetings. An attempt was made to have a coherent presentation of various theoretical, computational and spectroscopic approaches to help a better understanding of energetic materials from a molecular point of view. The progress already made in these areas is such that structure property (e. g.
Download or read book Control and Monitoring of Chemical Batch Reactors written by Fabrizio Caccavale and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical Batch Reactor is aimed at tackling the above problems from a blending of academic and industrial perspectives. Advanced solutions (i.e., those based on recent research results) to the four fundamental problems of modeling, identification, control and fault diagnosis for batch processes are developed in detail in four distinct chapters. In each chapter, a general overview of foundational concepts is also given, together with a review of recent and classical literature on the various subjects. To provide a unitary treatment of the different topics and give a firm link to the underlying practical applications, a single case study is developed as the book progresses; a batch process of industrial interest, i.e., the phenol-formaldehyde reaction for the production of phenolic resins, is adopted to test the various techniques developed. In this way, a roadmap of the solutions to fundamental problems, ranging from the early stages of the production process to the complete design of control and diagnosis systems, is provided for both industrial practitioners and academic researchers.
Download or read book Chemical Kinetics and Transport written by Peter Jordan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book began as a program of self-education. While teaching under graduate physical chemistry, I became progressively more dissatisfied with my approach to chemical kinetics. The solution to my problem was to write a detailed set of lecture notes which covered more material, in greater depth, than could be presented in undergraduate physical chemistry. These notes are the foundation upon which this book is built. My background led me to view chemical kinetics as closely related to transport phenomena. While the relationship of these topics is well known, it is often ignored, except for brief discussions of irreversible thermody namics. In fact, the physics underlying such apparently dissimilar processes as reaction and energy transfer is not so very different. The intermolecular potential is to transport what the potential-energy surface is to reactivity. Instead of beginning the sections devoted to chemical kinetics with a discussion of various theories, I have chosen to treat phenomenology and mechanism first. In this way the essential unity of kinetic arguments, whether applied to gas-phase or solution-phase reaction, can be emphasized. Theories of rate constants and of chemical dynamics are treated last, so that their strengths and weaknesses may be more clearly highlighted. The book is designed for students in their senior year or first year of graduate school. A year of undergraduate physical chemistry is essential preparation. While further exposure to chemical thermodynamics, statistical thermodynamics, or molecular spectroscopy is an asset, it is not necessary.
Download or read book Issues in Specialized Chemical and Chemistry Topics 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Specialized Chemical and Chemistry Topics: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Specialized Chemical and Chemistry Topics. The editors have built Issues in Specialized Chemical and Chemistry Topics: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Specialized Chemical and Chemistry Topics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Specialized Chemical and Chemistry Topics: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Peter Urben and published by Elsevier. This book was released on 2013-10-22 with total page 2660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick’s Handbook of Reactive Chemical Hazards is an assembly of all reported risks such as explosion, fire, toxic or high-energy events that result from chemical reactions gone astray, with extensive referencing to the primary literature. It is designed to improve safety in laboratories that perform chemical synthesis and general research, as well as chemical manufacturing plants. Entries are ordered by empirical formula and indexed under both name(s) and Chemical Abstracts Registry Numbers. This two-volume compendium focuses on reactivity risks of chemicals, alone and in combination; toxicity hazards are only included for unexpected reactions giving volatile poisons Predict, avoid, and control reactivity danger with this latest edition of the leading guide Covers every chemical with documented information on reactive hazards; more than 5,000 entries on single elements or compounds, and 5,000 entries on the interactions between two or more compounds Includes five years of new reports, new references to the primary literature, and amplification to existing entries Links similar compounds or incidents that are not obviously related
Download or read book Energy Revolution and Chemical Research written by Kok-Keong Chong and published by CRC Press. This book was released on 2022-12-08 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of the book is to promote research and developmental activities in energy, power technology and chemical technology. Besides, it aims to promote scientific information interchange between scholars from top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducted in-depth exchanges and discussions on relevant topics such as energy engineering and chemical engineering, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of energy materials, energy equipment and electrochemistry. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trends and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.
Download or read book Explosive Blast Injuries written by Zhengguo Wang and published by Springer Nature. This book was released on 2023-03-22 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic summary of a series of achievements of blast injury studies in China and the latest progress in blast injury treatment including injuries caused by various explosion accidents (such as coal mine gas explosion, and chemical explosion) and terrorist bombing around the world over the past three decades. The book not only covers comprehensive introductions to the knowledge and injury theories about explosive shock waves, but also expounds the prevention and treatment of various explosion shock injuries and their complications with generalized summaries. This book not only contains a diverse range of content, but also immense practicality. It elaborates on the causes of various types of explosion and impact injuries, as well as protection and treatment measures, serving not only as an important basis and technical support for military health service support in modern warfare, but is also extremely important in providing practical value in peacetime disaster prevention, mitigation and relief for patients.
Download or read book The Handling and Storage of Liquid Propellants written by United States. Advisory Panel on Fuels and Lubricants and published by . This book was released on 1961 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Energetics of the Atmosphere written by Boris M. Smirnov and published by Springer Nature. This book was released on 2022-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at global atmospheric processes from a physical standpoint using available current and past observational data taken from measurements of relevant atmospheric parameters. It describes various aspects of the current atmospheric state and its future evolution, focusing primarily on the energetic balance of the Earth and atmosphere, and taking into consideration the multi-faceted global equilibrium between these two systems, carbon, and water. The analysis presented in this book restricts itself to those objects and processes that allow us to obtain reliable conclusions and numerical estimations, in contrast to current climate models with much larger numbers of parameters for describing the same problems. As a result, in spite of the roughness of numerical parameters, the book unveils a reliable and transparent physical picture of energetic phenomena in the global atmosphere. In particular, it shows that approximately only one-fourth of atmospheric water returns from the atmosphere to the Earth in the form of free molecules. It was shown that the contemporary warming of our planet has an anthropogenic character, and that the average global temperature increases due to an increase of the concentration of atmospheric CO2 molecules, via an increase in atmospheric moisture, as well as an increase in the amount of aerosols in the atmosphere. Accumulation of atmospheric carbon dioxide plays a subsidiary role in this process and gives approximately one-third in a change of the global temperature, while an increase in the amount of atmospheric water by as little as only 0.3% per year explains the observed warming of the Earth. The book shows how the greenhouse instability of the atmosphere evidently has its origins in the Eocene epoch, presenting an analysis of the influence of various types of global energetic processes on the climate that differs from the official stance on these problems.
Download or read book Modelling of Chemical Reaction Systems written by K.H. Ebert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: For rather a long time numerical results in chemical kinetics could only be obtained for very simple chemical reactions, most of which were of minor practi ca 1 importance. The avail abil ity of fast computers has provi ded new opportunities for developments in chemical kinetics. Chemical systems of practical interest are usually very complicated. They consi st of a great number of different el ementary chemi cal reacti ons, mostly with rate constants differi ng by many orders of magni tude, frequently with surface reacti on steps and often wi th transport processes. The deri vati on of a 'true' chemical mechani sm can be extremely cumbersome. Mostly this work is done by setting up 'reaction models' which are im proved step by step in comparison with precise experimental data. At this early stage mathematics is involved, which may al ready be rather complicated. Mathematical methods such as pertubation theory, graph theory, sensitivity analysis or numerical integration are necessary for the derivation and application of optimal chemical reaction models. Most theoretical work aimed at improving the mathematical methods was done on chemical reactions which mostly were of little practical im portance. Chemi cal engi neers, who evi dently k now well how important the chemical model s and their dynamics are for reactor desi gn, have al so to be convinced not only on the theoretical work but also on its practical applic abil ity.
