Download or read book Liquids Under Negative Pressure written by A.R. Imre and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is possible to "stretch" a liquid and, when suitably prepared, liquids are capable of sustaining substantial levels of tension, often for significant periods of time. These negative pressure states are metastable but can last for days - long enough for substantial experimental investigation. This volume is a review of recent and current research into the behaviour of liquids under negative pressure. Part I deals with the thermodynamics of stretched liquids. Part II discusses the physical and chemical behaviour of liquids under negative pressure. Part III contains papers on the effect of negative pressure on the solidification of a liquid. Part IV is devoted to stretched helium and Part V discusses cavitation in various stretched liquids. Part VI deals with the effect of foreign substances on cavitation.

Download or read book Near critical and Supercritical Water and Their Applications for Biorefineries written by Zhen Fang and published by Springer. This book was released on 2014-07-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides fundamental chemistry and properties of near-critical water (NCW) and supercritical water (SCW), criteria and challenges/solutions in reactor design for NCW and SCW processes, and up-to-date reviews and practice of a wide range of their applications in bio refineries including: production of hydrochars from biomass, SCW oxidation (SCWO) for waste treatment, SCW gasification (SCWG) of biomass and waste for hydrogen and methane production, hydrothermal liquefaction of biomass, production of chemicals and SCWO of biofuels for energy. It also presents techno-economic analysis of hydrogen production via SCWG of biomass. The book will be highly essential for both academic researchers and industrial practitioners for developing novel bio refinery technologies and processes employing NCW or SCW for treatment of various organic waste streams and production of bio-energy and bio-based chemicals from bio-renewable resources. Prof. Dr. Zhen Fang is leader and founder of biomass group, Xishuangbanna Tropical Botanical Garden, Chinese Academy of Sciences, China. Dr. Chunbao (Charles) Xu is currently an Associate Professor of Chemical Engineering and NSERC/FP Innovations Industrial Research Chair in Forest Bio refinery at Western University, Canada.

Download or read book Chemical Thermodynamics written by Maxwell Len McGlashan and published by Royal Society of Chemistry. This book was released on 1978 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This product is not available separately, it is only sold as part of a set. There are 750 products in the set and these are all sold as one entity. Specialist Periodical Reports provide systematic and detailed review coverage of progress in the major areas of chemical research. Written by experts in their specialist fields the series creates a unique service for the active research chemist, supplying regular critical in-depth accounts of progress in particular areas of chemistry. For over 80 years the Royal Society of Chemistry and its predecessor, the Chemical Society, have been publishing reports charting developments in chemistry, which originally took the form of Annual Reports. However, by 1967 the whole spectrum of chemistry could no longer be contained within one volume and the series Specialist Periodical Reports was born. The Annual Reports themselves still existed but were divided into two, and subsequently three, volumes covering Inorganic, Organic and Physical Chemistry. For more general coverage of the highlights in chemistry they remain a 'must'. Since that time the SPR series has altered according to the fluctuating degree of activity in various fields of chemistry. Some titles have remained unchanged, while others have altered their emphasis along with their titles; some have been combined under a new name whereas others have had to be discontinued.

Download or read book The Experimental Determination of Solubilities written by G. T. Hefter and published by John Wiley & Sons. This book was released on 2003-11-14 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Guidelines are provided on the reliability of various methods, as well as information for selecting the appropriate technique. * Unique coverage of the whole range of solubility measurements. * Very useful for investigators interested in embarking upon solubility measurements.

Download or read book Phase Equilibrium Engineering written by Esteban Alberto Brignole and published by Newnes. This book was released on 2013-04-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the teaching of phase equilibria emphasizes the relationships between the thermodynamic variables of each phase in equilibrium rather than its engineering applications. This book changes the focus from the use of thermodynamics relationships to compute phase equilibria to the design and control of the phase conditions that a process needs. Phase Equilibrium Engineering presents a systematic study and application of phase equilibrium tools to the development of chemical processes. The thermodynamic modeling of mixtures for process development, synthesis, simulation, design and optimization is analyzed. The relation between the mixture molecular properties, the selection of the thermodynamic model and the process technology that could be applied are discussed. A classification of mixtures, separation process, thermodynamic models and technologies is presented to guide the engineer in the world of separation processes. The phase condition required for a given reacting system is studied at subcritical and supercritical conditions. The four cardinal points of phase equilibrium engineering are: the chemical plant or process, the laboratory, the modeling of phase equilibria and the simulator. The harmonization of all these components to obtain a better design or operation is the ultimate goal of phase equilibrium engineering. - Methodologies are discussed using relevant industrial examples - The molecular nature and composition of the process mixture is given a key role in process decisions - Phase equilibrium diagrams are used as a drawing board for process implementation

Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.

Download or read book Equations of State for Fluids and Fluid Mixtures written by J.V. Sengers and published by Elsevier. This book was released on 2000-10-30 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been prepared under the auspices of Commission I.2 on Thermodynamics of the International Union of Pure and Applied Chemistry (IUPAC). The authors of the 18 chapters are all recognized experts in the field. The book gives an up-to-date presentation of equations of state for fluids and fluid mixtures. All principal approaches for developing equations of state are covered. The theoretical basis and practical use of each type of equation is discussed and the strength and weaknesses of each is addressed. Topics addressed include the virial equation of state, cubic equations and generalized van der Waals equations, perturbation theory, integral equations, corresponding stated and mixing rules. Special attention is also devoted to associating fluids, polydisperse fluids, polymer systems, self-assembled systems, ionic fluids and fluids near critical points.

Download or read book Phase Equilibrium Engineering written by Martín Cismondi and published by Elsevier Inc. Chapters. This book was released on 2013-04-02 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter illustrates the wide variety of binary fluid phase equilibrium diagrams that can be obtained using models based on equations of state (EOS). It also highlights the need for paying attention to the predicted binary key lines, such as the critical and the liquid–liquid–vapor equilibrium lines, when fitting binary interaction parameters of an EOS model. In addition, efficient algorithms for the EOS-based automated computation of complete Univariant Lines Phase Equilibrium Diagrams and of complete restricted binary phase equilibrium diagrams, such as isoplethic, isothermal, or isobaric diagrams, are described.

Download or read book Thermodynamics written by J. P. O'Connell and published by Cambridge University Press. This book was released on 2005-05-16 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics: Fundamentals and Applications is a 2005 text for a first graduate course in Chemical Engineering. The focus is on macroscopic thermodynamics; discussions of modeling and molecular situations are integrated throughout. Underpinning this text is the knowledge that while thermodynamics describes natural phenomena, those descriptions are the products of creative, systematic minds. Nature unfolds without reference to human concepts of energy, entropy, or fugacity. Natural complexity can be organized and studied by thermodynamics methodology. The power of thermodynamics can be used to advantage if the fundamentals are understood. This text's emphasis is on fundamentals rather than modeling. Knowledge of the basics will enhance the ability to combine them with models when applying thermodynamics to practical situations. While the goal of an engineering education is to teach effective problem solving, this text never forgets the delight of discovery, the satisfaction of grasping intricate concepts, and the stimulation of the scholarly atmosphere.

Download or read book Coupled Heat and Mass Transfer in Binary Mixtures at Supercritical Pressures written by Zhan-Chao Hu and published by Springer Nature. This book was released on 2022-01-11 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical pressure fluids have been exploited in many engineering fields, where binary mixtures are frequently encountered. This book focuses on the coupled heat and mass transfer in them, where the coupling comes from cross-diffusion effects (i.e., Soret and Dufour effects) and temperature-dependent boundary reactions. Under this configuration, three main topics are discussed: relaxation and diffusion problems, hydrodynamic stability, and convective heat and mass transfer. This book reports a series of new phenomena, novel mechanisms, and an innovative engineering design in hydrodynamics and transport phenomena of binary mixtures at supercritical pressures. This book covers not only current research progress but also basic knowledge and background. It is very friendly to readers new to this field, especially graduate students without a deep theoretical background.

Download or read book High Pressure Fluid Phase Equilibria written by Ulrich K Deiters and published by Elsevier. This book was released on 2012-06-12 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an overview of the phase diagrams of fluid mixtures (fluid = liquid, gas, or supercritical state), which can show an astonishing variety when elevated pressures are taken into account; phenomena like retrograde condensation (single and double) and azeotropy (normal and double) are discussed. It then gives an introduction into the relevant thermodynamic equations for fluid mixtures, including some that are rarely found in modern textbooks, and shows how they can they be used to compute phase diagrams and related properties. This chapter gives a consistent and axiomatic approach to fluid thermodynamics; it avoids using activity coefficients. Further chapters are dedicated to solid-fluid phase equilibria and global phase diagrams (systematic search for phase diagram classes). The appendix contains numerical algorithms needed for the computations. The book thus enables the reader to create or improve computer programs for the calculation of fluid phase diagrams. introduces phase diagram classes, how to recognize them and identify their characteristic features presents rational nomenclature of binary fluid phase diagrams includes problems and solutions for self-testing, exercises or seminars

Download or read book Select Thermodynamic Models for Process Simulation written by Jean-Charles de Hemptinne and published by Editions TECHNIP. This book was released on 2012 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection of the most adequate thermodynamic model in a process simulation is an issue that most process engineer has to face sooner or later. This book, conceived as a practical guide, aims at providing adequate answers by analysing the questions to be looked at. The analysis (first chapter) yields three keys that are further discussed in three different chapters. (1) A good understanding of the properties required in the process, and their method of calculation is the first key. The second chapter provides to that end in a synthetic manner the most important equations that are derived from the fundamental principes of thermodynamics. (2) An adequate description of the mixture, which is a combination of models and parameters, is the second key. The third chapter makes the link between components and models, both from a numerical (parameterisation) and physical (molecular interactions) point of view. Finally, (3) a correct view of the phase behaviour and trends in regard of the process conditions is the third key. The fourth chapter illustrates the phase behaviour and makes model recommendations for the most significant industrial systems. A decision tree is provided at the end of this chapter. In the last chapter, the key questions are reviewed for a number of typical processes. This book is intended for process engineers, who are not specialists of thermodynamics but are confronted with this kind of problems and need a reference book, as well as process engineering students who will find an original approach to thermodynamics, complementary of traditional lectures

Download or read book Supercritical Fluid Technology 1991 written by Thomas J. Bruno and published by CRC Press. This book was released on 2017-11-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, we have collected a series of reviews that cover both experimental and theoretical work geared toward the more exact requirements of current SFE applications. While we have artificially divided the volume into experimental and theoretical sections, natural overlaps will be apparent. Many of the papers on experimental and theoretical sections, natural overlaps will be apparent. Many of the papers on experimental technique contain discussions on equation of state correlations. Indeed, a good deal of the experimental work is intimately tied to a mathematical description of fluid mixtures. The theoretical section presents reviews that cover the modern theory of critical phenomena, methods to correlate near critical experimental results and approaches to understanding the behavior of near critical fluids from microscopic theory. It is hoped that the scope of these reviews will provide the reader with the basis to further develop our understanding of the behavior of supercritical fluids.

Download or read book Introduction to Critical Phenomena in Fluids written by Eldred H. Chimowitz and published by Oxford University Press. This book was released on 2005-06-02 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Critical Phenomena in Fluids encompasses the fundamentals of this relatively young field, as well as applications in the fields of chemical engineering, analytical chemistry, and environmental remediation processing. The exercises in the text have been developed in a way that makes the book suitable for graduate courses in chemical engineering thermodynamics and physical chemistry.

Download or read book Handbook of Liquefied Natural Gas written by Saeid Mokhatab and published by Gulf Professional Publishing. This book was released on 2013-10-15 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquefied natural gas (LNG) is a commercially attractive phase of the commodity that facilitates the efficient handling and transportation of natural gas around the world. The LNG industry, using technologies proven over decades of development, continues to expand its markets, diversify its supply chains and increase its share of the global natural gas trade. The Handbook of Liquefied Natural Gas is a timely book as the industry is currently developing new large sources of supply and the technologies have evolved in recent years to enable offshore infrastructure to develop and handle resources in more remote and harsher environments. It is the only book of its kind, covering the many aspects of the LNG supply chain from liquefaction to regasification by addressing the LNG industries' fundamentals and markets, as well as detailed engineering and design principles. A unique, well-documented, and forward-thinking work, this reference book provides an ideal platform for scientists, engineers, and other professionals involved in the LNG industry to gain a better understanding of the key basic and advanced topics relevant to LNG projects in operation and/or in planning and development. - Highlights the developments in the natural gas liquefaction industries and the challenges in meeting environmental regulations - Provides guidelines in utilizing the full potential of LNG assets - Offers advices on LNG plant design and operation based on proven practices and design experience - Emphasizes technology selection and innovation with focus on a "fit-for-purpose design - Updates code and regulation, safety, and security requirements for LNG applications

Download or read book Encyclopedia of Chemical Processing written by Sunggyu Lee and published by Taylor & Francis US. This book was released on 2006 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplying nearly 350 expertly-written articles on technologies that can maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques, this second edition provides gold standard articles on the methods, practices, products, and standards recently influencing the chemical industries. New material includes: design of key unit operations involved with chemical processes; design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; current industry practices; and pilot plant design and scale-up criteria.

Download or read book Distillation written by Vilmar Steffen and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to offer readers important topics on the modeling, simulation, and optimization of distillation processes. The book is divided into four main sections: the first section is introduction to the topic, the second presents work related to distillation process modeling, the third deals with the modeling of phase equilibrium, one of the most important steps of distillation process modeling, and the the fourth looks at the reactive distillation process, a process that has been applied successfully to a number of applications and has been revealed as a promising strategy for a number of recent challenges.