Download or read book The Mathematics of Diffusion written by John Crank and published by Oxford University Press. This book was released on 1979 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though it incorporates much new material, this new edition preserves the general character of the book in providing a collection of solutions of the equations of diffusion and describing how these solutions may be obtained.

Download or read book Kinetics of Materials written by Robert W. Balluffi and published by John Wiley & Sons. This book was released on 2005-12-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classroom-tested textbook providing a fundamental understandingof basic kinetic processes in materials This textbook, reflecting the hands-on teaching experience of itsthree authors, evolved from Massachusetts Institute of Technology'sfirst-year graduate curriculum in the Department of MaterialsScience and Engineering. It discusses key topics collectivelyrepresenting the basic kinetic processes that cause changes in thesize, shape, composition, and atomistic structure of materials.Readers gain a deeper understanding of these kinetic processes andof the properties and applications of materials. Topics are introduced in a logical order, enabling students todevelop a solid foundation before advancing to more sophisticatedtopics. Kinetics of Materials begins with diffusion, offering adescription of the elementary manner in which atoms and moleculesmove around in solids and liquids. Next, the more complex motion ofdislocations and interfaces is addressed. Finally, still morecomplex kinetic phenomena, such as morphological evolution andphase transformations, are treated. Throughout the textbook, readers are instilled with an appreciationof the subject's analytic foundations and, in many cases, theapproximations commonly used in the field. The authors offer manyextensive derivations of important results to help illuminate theirorigins. While the principal focus is on kinetic phenomena incrystalline materials, select phenomena in noncrystalline materialsare also discussed. In many cases, the principles involved apply toall materials. Exercises with accompanying solutions are provided throughoutKinetics of Materials, enabling readers to put their newfoundknowledge into practice. In addition, bibliographies are offeredwith each chapter, helping readers to investigate specializedtopics in greater detail. Several appendices presenting importantbackground material are also included. With its unique range of topics, progressive structure, andextensive exercises, this classroom-tested textbook provides anenriching learning experience for first-year graduate students.

Download or read book Diffusion in Condensed Matter written by Paul Heitjans and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, handbook-style survey of diffusion in condensed matter gives detailed insight into diffusion as the process of particle transport due to stochastic movement. It is understood and presented as a phenomenon of crucial relevance for a large variety of processes and materials. In this book, all aspects of the theoretical fundamentals, experimental techniques, highlights of current developments and results for solids, liquids and interfaces are presented.

Download or read book Vortices in Unconventional Superconductors and Superfluids written by Rudolf Huebener and published by Springer Science & Business Media. This book was released on 2002-01-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topological defects are generic in continuous media. In the relativistic quantum vacuum they are known as cosmic strings, in superconductors as quantized flux lines, and in superfluids, low-density atomic Bose-Einstein condensates and neutron stars as quantized vortex lines. This collection of articles by leading scientists presents a modern treatment of the physics of vortex matter, mainly applied to unconventional superconductors and superfluids but with extensions to other areas of physics.

Download or read book Selected Properties of Hydrogen engineering Design Data written by Robert D. McCarty and published by . This book was released on 1981 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Diffusion in Materials written by A.L. Laskar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the NATO Advanced Study Institute, "Diffusion in Materials", held at "Centre Paul Langevin", Aussois, during March 12-25, 1989. There were 105 participants of whom 24 were lecturers and members of the international advisory committee. In addition to the participants from NATO countries, a small number of participants came from Australia, Hungary, Poland and Tunisia. The principal aim of the organizing committee was to bring together scientists of wide interest and expertise in the field of diffusion and to familiarize the young workers in material science with the wide range of theoretical models and methods and of experimental techniques . The Institute was concerned with the study of diffusion and related phenomena in solids which are at the cutting edge of novel technologies. The discussion of basic theories of defects in solids and their transport, with their applications in the understanding of diffusion processes in "simple solids" was followed by the wide range of current theoretical models and methods, experimental techniques and their potential. The lectures on the diffusion in specific materials included : metals, dilute and concentrated alloys, simple and compound semiconductors, stoichiometric and non-stoichiometric oxides, high-Tc compounds, carbides, nitrides, silicates, conducting polymers and thin films, ionic, superionic, amorphous and irradiated materials.

Download or read book National Construction Safety Team Act written by United States. Congress. House. Committee on Rules and published by . This book was released on 2002 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2017-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.

Download or read book Ice Sheets and Climate written by Johannes Oerlemans and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate modelling is a field in rapid development, and the fltudy of cryospheric processes has become an important part of it. On smaller time scales, the effect of snow cover and sea ice on the atmospheric circulation is of concern for long-range weather forecasting. Thinking in decades or centuries, the effect of a C02 climatic warming on the present-day ice sheets, and the resulting changes in global sea level, has drawn a lot of attention. In particular, the dynamics of marine ice sheets (ice sheets on a bed that would be below sea level after removal of ice and full isostatic rebound) is a subject of continuous research. This interest stems from the fact that the West Antarctic Ice Sheet is a marine ice sheet which, according to some workers, may be close to a complete collapse. The Pleistocene ice ages, or glacial cycles, are best characterized by total ice volume on earth, indicating that on 4 5 large time scales (10 to 10 yr) ice sheets are a dominant component of the climate system. The enormous amount of paleoclimatic information obtained from deep-sea sediments in the last few decades has led to a complete revival of iriterest in the physical aspects of the Pleistocene climatic evolution.

Download or read book Structure and Bonding in Noncrystalline Solids written by George E. Walrafen and published by Springer. This book was released on 2012-02-09 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noncrystalline (NC) solids, as is well known, lack the long range order of crystals. Accordingly, they exhibit scattering, e.g., x-ray, electron, and neutron, but not the diffraction patterns characteristic of crystals. The intensity distributions from NC solids are usually transformed into radial distribution functions (RDF), but the interpretation of the RDF's is not unique. The lack of long-range order, and the non-uniqueness of the structural interpretation, have constituted the main obstacles to the usual solid state physics approach which has been so successful in dealing with crystals. As a corrolary, questions of local order and structure have frequently been de-emphasized. This monograph contains a collection of chapters many of which emphasize local-structure and chemical bonding as opposed to long-range order. Most of the chapters were chosen from talks given at the international symposium, "Structure and Bonding in Noncrystalline Solids," held in Reston, Virginia in May of 1983. Other chapters, however, were simply submitted independently of the Reston conference. Thus, this book is not a proceedings of that conference, nor was it ever intended to be. The chapters presented here range from theory of bonding and structure, to structurally oriented measurements of various kinds, e.g., ESR, Raman, to more applied chapters. Our goal was to produce a monograph that enhances understanding of the structures of NC solids.

Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.

Download or read book Fuel Cell Handbook written by A. J. Appleby and published by Krieger Publishing Company. This book was released on 1993 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mixed Ionic Electronic Conducting Perovskites for Advanced Energy Systems written by Nina Orlovskaya and published by Springer Science & Business Media. This book was released on 2004-09-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced mixed ionic electronic conducting (MIEC) perovskites play an important role in many electrochemical systems for advanced energy technologies. They are major components in such devices as solid oxide fuel cells (SOFCs), oxygen separation membranes, chemical sensors and catalysts. In addition to energy technology, the development of these multifunctional materials is of crucial importance for transportation, aerospace engineering, and electronics. The use of these materials as chemical sensors is also important for anti-terrorism initiatives. The present book discusses progress and problems in the development of ionic, electronic, and MIEC materials as active materials in advanced energy systems; the development and design of solid-oxide fuel cells (SOFCs) for next-generation vehicles, chemical sensors and oxygen separation membranes; and identifies directions for future research, such as conducting mechanisms, stability and reliability of devices, degradation problems, crystal structure, classification of phase transitions exhibited by the materials.

Download or read book Inelastic Behaviour of Structures under Variable Loads written by Zenon Mróz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers is a state of the art presentation of theories and methods related to the problem of the behaviour of mechanical structures under variable loads beyond their elastic limit In particular, the problems of shakedown, ratchetting, transient and asymptotic cyclic states are addressed. The volume is composed of four chapters devoted to material modelling for cyclic loading conditions; general theory of accommodated states of structures; effects of changes of the geometry on the inelastic structural response; and numerical techniques with applications to particular engineering problems. It was aimed to provide a unified approach in order to understand both inelastic material and structural response under variable loading conditions. The attempt to extend the classical shakedown theory of Melan and Koiter to geometrically non-linear problems is presented in several papers. The industrial application of cyclic plasticity to the analysis and the design of pressure bellows, compensators, turbine disks, or flange connections under thermal and pressure cycles illustrates the great potential of the numerical techniques developed for this purpose using mostly min-max approaches. The treatment of railway problems and the analysis and optimisation of pavements are further examples of important areas of applications. Emphasis was laid on approaches that take into account the fact that loading histories are often not precisely known Therefore, the center of interest lies in other than step by step calculation methods.

Download or read book Electrets written by Gerhard M. Sessler and published by Springer Science & Business Media. This book was released on 2005-08-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mass Transfer and Kinetics of Ion Exchange written by L. Liberti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-exchange processes were originally used for the treatment of very dilute solutions, many applications for the treatment of concentrated solu tions have been developed in recent years. In these situations, the mass transfer bottlenecks are located in the~, rather than the liquid phase. Therefore, the development of quantitative models for ion-exchange kinetics requires knowledge about the conductance characteristics of ions and solvent in the solid phase. A useful approach towards this aim is the study of trans port characteristics of these species, and of their interactions in solid ion exchange membranes. Many different transport processes and related phenomena can be observed in membrane-solution systems, e.g., ion migration, electroosmosis, diffusion arid self-diffusion, osmosis, hydraulic flow, hyperfiltration (reverse osmosis) or ultrafiltration, streaming potential and streaming current, and membrane potentials (also called "membrane concentration potentials"). It is important to correlate all these phenomena so as to avoid a very large number of unnec essary measurements. Such correlation is often possible [Meares, 1976] since all these phenomena are determined by the ease of migration of the different species across the membrane. Important correlations have been made and summar ized even before high-capacity ion-exchange membranes became commercially available [Sollner, 1950, 197iJ.

Download or read book Engineering Properties of Steel written by Philip D. Harvey and published by ASM International(OH). This book was released on 1982 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive data on properties of more than 425 steels. Includes carbon steels: 1000, 1100, 1200, and 1500 Series; alloy steels: 1300-9000; high-strength steels: carbon and low alloy; stainless steels and heat-resisting alloys; tool steels; and maraging steels. Provides data on chemical composition, mechanical properties, physical properties, fabrication characteristics, machining data and typical uses of steels. The steels are also cross-referenced to U.S. and foreign standards. Book jacket.