Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Creep Deformation Fundamentals and Applications written by Rajiv S. Mishra and published by Minerals, Metals, & Materials Society. This book was released on 2002 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings focus on the application of fundamental creep research to the design and development of high temperature materials for engineering applications. The book deals with all aspects of creep deformation and high temperature materials development, specifically the influence of microstructures on various aspects of creep and the application of this information in the design of highly creep resistant materials. Emphasis will be placed on advanced ceramic and metal matrix composites and advanced intermetallics. This volume brings together researchers working on fundamental issues relating to the development and characterization of high temperature materials and design engineers involved in high temperature applications.
Download or read book Plasticity and Creep of Metals written by Andrew Rusinko and published by Springer Science & Business Media. This book was released on 2011-07-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.
Download or read book Creep written by Tomasz Tański and published by BoD – Books on Demand. This book was released on 2018-01-10 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 12 chapters with original and innovative research studies in the issues related to the broadly defined creep effect, which concerns not only the area of construction materials but also natural phenomena. The emphasis on the discussion of a new trend of experimental creep testing, which binds the classic creep methods to seek the correlation of parameters obtained in tests, deserves particular attention. This book aims to provide the readers, including, but not limited to, students and doctoral students and also the research personnel and engineers involved in the operation of equipment and structural components as well as specialists in high-temperature creep-resisting materials, with a comprehensive review of new trends in the field of creep-exposed materials and their research methodology. The chapters of this book were developed by respected and well-known researchers from different countries.
Download or read book Engineering Solid Mechanics written by Abdel-Rahman A. Ragab and published by CRC Press. This book was released on 2018-02-06 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Solid Mechanics bridges the gap between elementary approaches to strength of materials and more advanced, specialized versions on the subject. The book provides a basic understanding of the fundamentals of elasticity and plasticity, applies these fundamentals to solve analytically a spectrum of engineering problems, and introduces advanced topics of mechanics of materials - including fracture mechanics, creep, superplasticity, fiber reinforced composites, powder compacts, and porous solids. Text includes: stress and strain, equilibrium, and compatibility elastic stress-strain relations the elastic problem and the stress function approach to solving plane elastic problems applications of the stress function solution in Cartesian and polar coordinates Problems of elastic rods, plates, and shells through formulating a strain compatibility function as well as applying energy methods Elastic and elastic-plastic fracture mechanics Plastic and creep deformation Inelastic deformation and its applications This book presents the material in an instructive manner, suitable for individual self-study. It emphasizes analytical treatment of the subject, which is essential for handling modern numerical methods as well as assessing and creating software packages. The authors provide generous explanations, systematic derivations, and detailed discussions, supplemented by a vast variety of problems and solved examples. Primarily written for professionals and students in mechanical engineering, Engineering Solid Mechanics also serves persons in other fields of engineering, such as aerospace, civil, and material engineering.
Download or read book Plasticity in Structural Engineering Fundamentals and Applications written by Ch. Massonnet and published by Springer. This book was released on 2014-05-04 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Continuum Mechanics written by Holm Altenbach and published by Springer. This book was released on 2020-01-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia covers the entire science of continuum mechanics including the mechanics of materials and fluids. The encyclopedia comprises mathematical definitions for continuum mechanical modeling, fundamental physical concepts, mechanical modeling methodology, numerical approaches and many fundamental applications. The modelling and analytical techniques are powerful tools in mechanical civil and areospsace engineering, plus in related fields of plasticity, viscoelasticity and rheology. Tensor-based and reference-frame-independent, continuum mechanics has recently found applications in geophysics and materials.
Download or read book Continuum Scale Simulation of Engineering Materials written by Dierk Raabe and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume provides an excellent overview on the different methods, comparing the different methods in terms of their respective particular weaknesses and advantages. This trains readers to identify appropriate approaches to the new challenges that emerge every day in this exciting domain. Divided into three main parts, the first is a basic overview covering fundamental key methods in the field of continuum scale materials simulation. The second one then goes on to look at applications of these methods to the prediction of microstructures, dealing with explicit simulation examples, while the third part discusses example applications in the field of process simulation. By presenting a spectrum of different computational approaches to materials, the book aims to initiate the development of corresponding virtual laboratories in the industry in which these methods are exploited. As such, it addresses graduates and undergraduates, lecturers, materials scientists and engineers, physicists, biologists, chemists, mathematicians, and mechanical engineers.
Download or read book Creep Deformation and Fracture Design and Life Extension written by Rajiv S. Mishra and published by T M S Publications. This book was released on 2005 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.
Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.
Download or read book Creep and Fracture of Ice written by Erland M. Schulson and published by Cambridge University Press. This book was released on 2009-04-30 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first complete account of the physics of the creep and fracture of ice, for graduates, engineers and scientists.
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Creep in Ceramics written by Joshua Pelleg and published by Springer. This book was released on 2017-03-28 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on Creep in Ceramics. The book consists of two parts. In part A general knowledge of creep in ceramics is considered, while part B specifies creep in technologically important ceramics, namely creep in oxide ceramics, carnides and nitrides. While covering all relevant information regarding raw materials and characterization of creep in ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.
Download or read book Thermal Stresses Advanced Theory and Applications written by Richard B. Hetnarski and published by Springer. This book was released on 2019-04-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an advanced modern textbook on thermal stresses. It serves a wide range of readers, in particular, graduate and postgraduate students, scientists, researchers in various industrial and government institutes, and engineers working in mechanical, civil, and aerospace engineering. This volume covers diverse areas of applied mathematics, continuum mechanics, stress analysis, and mechanical design. This work treats a number of topics not presented in other books on thermal stresses, for example: theory of coupled and generalized thermoelasticity, finite and boundary element method in generalized thermoelasticity, thermal stresses in functionally graded structures, and thermal expansions of piping systems. The book starts from basic concepts and principles, and these are developed to more advanced levels as the text progresses. Nevertheless, some basic knowledge on the part of the reader is expected in classical mechanics, stress analysis, and mathematics, including vector and cartesian tensor analysis. This 2nd enhanced edition includes a new chapter on Thermally Induced Vibrations. The method of stiffness is added to Chapter 7. The variational principle for the Green-Lindsay and Green-Naghdi models have been added to Chapter 2 and equations of motion and compatibility equations in spherical coordinates to Chapter 3. Additional problems at the end of chapters were added.
Download or read book Modeling of Creep for Structural Analysis written by Konstantin Naumenko and published by Springer. This book was released on 2010-11-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops methods to simulate and analyze the time-dependent changes of stress and strain states in engineering structures up to the critical stage of creep rupture. The objective of this book is to review some of the classical and recently proposed approaches to the modeling of creep for structural analysis applications. It also aims to extend the collection of available solutions of creep problems by new, more sophisticated examples.
