Download or read book Creep and Long Term Strength of Metals written by A. M. Lokoshchenko and published by CRC Press. This book was released on 2017-12-14 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Creep Rupture of Metals is devoted to the fundamental description of the phenomenon of creep which occurs widely in high-temperature deformation of metals. Special attention is paid to the analysis of long-term strength, which characterizes the stress at which the metal does not fail after a predetermined time. The author details experimental and theoretical results obtained by Soviet and Russian scientists that are absent in currently available publications and demonstrates analytical methods and approaches to achieve long term strength in Metals.
Download or read book Creep and Long Term Strength of Metals written by A. M. Lokoshchenko and published by CRC Press. This book was released on 2017-12-14 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Creep Rupture of Metals is devoted to the fundamental description of the phenomenon of creep which occurs widely in high-temperature deformation of metals. Special attention is paid to the analysis of long-term strength, which characterizes the stress at which the metal does not fail after a predetermined time. The author details experimental and theoretical results obtained by Soviet and Russian scientists that are absent in currently available publications and demonstrates analytical methods and approaches to achieve long term strength in Metals.
Download or read book Kinetic Theory of Creep and Long Term Strength of Metals written by Alexander Lokoshchenko and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter deals with the simulation of the creep process and the effect of long-term strength of metals, notably, in both uniaxial and complex stress states. A description of a creep experiment and the simplest creep models are presented, that is, the theory of steady creep, the theory of ageing, the theory of flow and the theory of hardening. In creep process simulation, a kinetic theory based on the introduction of structural parameters characterising the state of the metal at a given time is widely used. Among such parameters, metal damage in the creep process, work of stresses on creep deformations (energy version) and concentration of an aggressive medium in the metal were studied. The coupled problem of creep and long tensile strength is also considered taking into account the mutual influence of damage accumulation and one-dimensional diffusion of the aggressive medium. The times to fracture are determined both in the presence of an aggressive medium and in the absence of one. A significant contribution of Soviet (Russian), European, American and Japanese scientists to the development of continuum damage mechanics is highlighted.
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Proceedings of the Third International Conference on Theoretical Applied and Experimental Mechanics written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2020-05-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd edition of the International Conference on Theoretical, Applied and Experimental Mechanics. The papers focus on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture mechanics, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.
Download or read book Kinetic Theory written by George Kyzas and published by BoD – Books on Demand. This book was released on 2018-02-14 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is governed by motions. The term kinetics partially originated from the Greek word "kinisis," which means motion. How important is motion in our life is easily understood. But, how the kinetic theories have been developed during years? Which are the new kinetic theories and updates in recent years? This question and many others can be answered with this book. Some important areas discussed in this book are the kinetic theory of gases, kinetic theory of liquids and vapors, thermodynamic aspects, transportation phenomena, adsorption-kinetic theories, linear and nonlinear kinetic equations, quantum kinetic theory, kinetic theory of nucleation, plasma kinetic theory, and relativistic kinetic theory.
Download or read book Creep and Fracture in High Temperature Components written by European Creep Collaborative Committee and published by DEStech Publications, Inc. This book was released on 2005 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information from around the world on creep in multiple high-temperature metals, alloys, and advanced materials.
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book Fundamentals of Creep and Creep rupture in Metals written by Frank Garofalo and published by . This book was released on 1965 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. - Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites - Puts a specific focus on viscoelastic and viscoplastic modeling - Features the time-temperature-age superposition principle for predicting long-term response - Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Download or read book Creep written by Tomasz Tański and published by BoD – Books on Demand. This book was released on 2018-01-10 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 12 chapters with original and innovative research studies in the issues related to the broadly defined creep effect, which concerns not only the area of construction materials but also natural phenomena. The emphasis on the discussion of a new trend of experimental creep testing, which binds the classic creep methods to seek the correlation of parameters obtained in tests, deserves particular attention. This book aims to provide the readers, including, but not limited to, students and doctoral students and also the research personnel and engineers involved in the operation of equipment and structural components as well as specialists in high-temperature creep-resisting materials, with a comprehensive review of new trends in the field of creep-exposed materials and their research methodology. The chapters of this book were developed by respected and well-known researchers from different countries.
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2008-11-27 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or "dislocation defect level. This book has many illustrations and many references. The figure formats are uniform and consistently labeled for increased readability. This book is the second edition that updates and improves the earlier edition. - Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials - Transmission electron micrographs provide direct insight into the basic microstructure of metals deforming at high temperatures - Extensive literature review of about 1000 references provides an excellent overview of the field
Download or read book Long Term Strength of Materials written by Alexander Chudnovsky and published by CRC Press. This book was released on 2023-08-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physics of fracture processes, which includes Fracture mechanics, is crucial for understanding the longevity and reliability of any structure, from fracture initiation to propagation and final catastrophic failure. This textbook introduces the thermodynamics of irreversible processes along with entropy to address the time dependency of fracture. Working from observations of structural failure, the book identifies the principal failure types such as brittle fracture, with considerations of solo crack initiation and crack propagation associated with collective distributed damage. The other type is ductile fracture, when a crack blunts immediately on the application of stress resulting in large deformation. The book then addresses the life of a structure in a specific environment and load condition, using irreversible thermodynamics and the entropy criterion to address cooperative fracture and novel statistical Fracture mechanics to address solo fracture. Applies well-established concepts from mechanics, absent in contemporary Fracture mechanics Uses novel concepts of mechanics, irreversible thermodynamics, and statistical Fracture mechanics The book is ideal for graduate students and design engineers in civil and materials engineering, as well as mechanical and chemical engineering. Students using the book need no more than basic college-level mechanics, mathematics, and statistics knowledge.
Download or read book Strength of Metals and Alloys ICSMA 7 written by H. J. McQueen and published by Elsevier. This book was released on 2016-07-29 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength of Metals and Alloys, Volume 3 (ICSMA 7) presents the proceedings of the 7th International Conference on the Strength of Metals and Alloys held in Montreal, Canada on August 12-16, 1985. The book includes papers on the work hardening of face-centered cubic single crystals; precipitation hardening; and microstructure evolution and flow stress during hot working. The text also covers papers on microstructure evolution and flow stress during hot working; the prediction of deformation textures in cubic metals; creep of copper-base shape memory alloys; and flow behavior of nickel-base superalloys at isothermal forging temperatures and strain rates. Grain refinement by recrystallization hot-rolling to achieve high strength and notch toughness in microalloyed steel plate; as well as the influence of mean stress on fatigue strength of TI-6A1-4V are also encompassed. The book further includes papers on the comparative mechanical properties of human bones; the effect of precipitation hardening on the decomposition of the solid solution in 7075 alloy during quenching; and the mechanical properties of stable and unstable austenitic stainless steels.
Download or read book Proceedings Creep Fracture in High Temperature Components written by I. A. Shibli and published by DEStech Publications, Inc. This book was released on 2009 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compendium of European and worldwide research investigating creep, fatigue and failure behaviors in metals under high-temperature and other service stresses. It helps set the standards for coordinating creep data and for maintaining defect-free quality in high-temperature metals and metal-based weldments.
Download or read book Advanced Problem in Mechanics III written by D. A. Indeitsev and published by Springer Nature. This book was released on 2023-08-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on original theories and approaches in the field of mechanics. It reports on both theoretical and applied researches, with a special emphasis on problems and solutions at the interfaces of mechanics and other research areas. The respective chapters highlight cutting-edge works fostering development in fields such as micro- and nanomechanics, material science, physics of solid states, molecular physics, astrophysics, and many others. Special attention has been given to outstanding research conducted by young scientists from all over the world. This book is based on the 49th edition of the international conference “Advanced Problems in Mechanics”, which was held on June 21-25, 2021, in St. Petersburg, Russia, and co-organized by The Peter the Great St. Petersburg Polytechnic University and the Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, under the patronage of the Russian Academy of Sciences. It provides researchers and graduate students with an extensive overview of the latest research and a source of inspiration for future developments and collaborations in mechanics and related fields.
