Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.

Download or read book Advances on Coupled Thermo hydro mechanical chemical Processes in Geosystems and Engineering written by Weiya Xu and published by . This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermo Hydromechanical and Chemical Coupling in Geomaterials and Applications written by Jian-Fu Shao and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: GeoProc2008 collects the proceedings of the International Conference on Coupled T-H-M-C (thermal, hydraulic, mechanical, chemical) Processes in Geosystems.

Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Fractured Rocks written by Zhihong Zhao and published by Springer Nature. This book was released on 2023-11-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the coupled Thermo-Hydro-Mechanical-Chemical (THMC) processes in fractured rocks at varying scales from single fractures to fracture networks. It also discussed the implication and potential application of the advanced understanding of coupled THMC processes in fractured rocks for geotechnical and geo-energy engineering.

Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2016-04-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new suite of benchmarks for and examples of porous media mechanics collected over the last two years. It continues the assembly of benchmarks and examples for porous media mechanics published in 2014. The book covers various applications in the geosciences, geotechnics, geothermal energy, and geological waste deposition. The analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to many applications in environmental engineering, such as geological waste deposition, geothermal energy utilisation, carbon capture and storage, water resources management, hydrology, and even climate change. In order to assess the feasibility and safety of geotechnical applications, process-based modelling is the only tool that can effectively quantify future scenarios, a fact which also creates a huge burden of responsibility concerning the reliability of computational tools. The book shows that benchmarking offers a suitable methodology for verifying the quality of modelling tools based on best practices, and together with code comparison fosters community efforts. It also provides a brief introduction to the DECOVALEX, SeSBench and MOMAS initiatives. This benchmark book is part of the OpenGeoSys initiative – an open source project designed to share knowledge and experience in environmental analysis and scientific computation.

Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2018-03-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises the 3rd collection of benchmarks and examples for porous and fractured media mechanics. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to a wide area of applications in environmental engineering, such as geological waste deposition, geothermal energy utilization (shallow and deep systems), carbon capture and storage (CCS) as well as water resources management and hydrology. In order to assess the feasibility, safety as well as sustainability of geoenvironmental applications, model-based simulation is the only way to quantify future scenarios. This charges a huge responsibility concerning the reliability of conceptual models and computational tools. Benchmarking is an appropriate methodology to verify the quality and validate the concept of models based on best practices. Moreover, benchmarking and code comparison are building strong community links. The 3rd THMC benchmark book also introduces benchmark-based tutorials, therefore the subtitle is selected as “From Benchmarking to Tutoring”. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation. The new version of OGS-6 is introduced and first benchmarks are presented therein (see appendices).

Download or read book Thermo Hydro Mechanical Chemical Processes in Porous Media written by Olaf Kolditz and published by Springer Science & Business Media. This book was released on 2012-04-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises an assembly of benchmarks and examples for porous media mechanics collected over the last twenty years. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to many applications in environmental engineering, such as geological waste deposition, geothermal energy utilisation, carbon capture and storage, water resources management, hydrology, even climate chance. In order to assess the feasibility as well as the safety of geotechnical applications, process-based modelling is the only tool to put numbers, i.e. to quantify future scenarios. This charges a huge responsibility concerning the reliability of computational tools. Benchmarking is an appropriate methodology to verify the quality of modelling tools based on best practices. Moreover, benchmarking and code comparison foster community efforts. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation.

Download or read book Hydrology and Geochemistry of Yucca Mountain and Vicinity Southern Nevada and California written by John S. Stuckless and published by Geological Society of America. This book was released on 2012 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 8th International Congress on Environmental Geotechnics Volume 1 written by Liangtong Zhan and published by Springer. This book was released on 2018-10-10 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the 8th International Congress on Environmental Geotechnics (ICEG), held on October 28 - November 1, 2018 in Hangzhou, China. The theme of the congress is “Towards a Sustainable Geoenvironment”, which means meeting the needs of the present generation without compromising the ability of future generations to meet their own needs. Under this theme, the congress covers a broad range of topics and provides an excellent opportunity for academics, engineers, scientists, government officials, regulators, and planners to present, discuss and exchange notes on the latest advances and developments in the research and application of environmental geotechnics.

Download or read book Thermo Poroelasticity and Geomechanics written by A. P. S. Selvadurai and published by Cambridge University Press. This book was released on 2016-10-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: A full account of thermo-poroelasticity and thermo-poromechanics with derivations to problems, for both experienced and novice researchers.

Download or read book Impact of Human Activity on the Geological Environment EUROCK 2005 written by Pavel Konecny and published by CRC Press. This book was released on 2005-05-12 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work focuses on the impact of human activity on the geological environment and contains over 100 papers dealing with laboratory and field research investigations in geomechanics, geoengineering and mathematical modelling. Topics covered are grouped into eight main themes: response of the rock mass to human impact; slope stability; field research; laboratory research; stability of underground openings; mathematical modelling; stress measurements, and mineral and rock disintegration.

Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 1196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Failure Mechanisms written by Chun'An Tang and published by CRC Press. This book was released on 2010-08-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: When dealing with rock in civil engineering, mining engineering and other engineering, the process by which the rock fails under load should be understood, so that safe structures can be built on and in the rock. However, there are many ways for loading rock and rock can have a variety of idiosyncracies. This reference book provides engineers and researchers with the essential knowledge for a clear understanding of the process of rock failure under different conditions. It contains an introductory chapter explaining the role of rock failure in engineering projects plus a summary of the theories governing rock failure and an explanation of the computer simulation method. It subsquently deals in detail with explaining, simulating and illustrating rock failure in laboratory and field. The concluding chapter discusses coupled modelling and the anticipated future directions for this type of computer simulation. An appendix describing the RFPA numerical model (Rock Failure Process Analysis program) is also included. About the Authors Chun'an Tang has a PhD in Mining Engineering and is a Professor at the School of Civil & Hydraulic Engineering at Dalian University of Technology in China. He is an advisor for design and stablity problem modelling in mining and civil rock engineeringand and Chairman of the China National Group of the International Society for Rock Mechanics. John Hudson is emeritus professor at Imperial College, London and is active as an independant consultant for Rock Engineering Consultants. He has a PhD in Rock Mechanics and completed over a 130 rock engineering consulting assignments in mining and civil engineering. He is a fellow at the Royal Academy of Engineering in the UK and President of the International Society for Rock Mechanics.

Download or read book Landslides and Climate Change Challenges and Solutions written by Robin McInnes and published by CRC Press. This book was released on 2007-05-10 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the relationship between landslides and climate change is crucially important in planning a proactive approach to hazard and risk management. Advances in geohazard modelling and prediction enable us to be better prepared for the impacts of climate change, but there is still a need for effective risk management and informed plann

Download or read book The Physics of Composite and Porous Media written by T. J. T. (Tim) Spanos and published by CRC Press. This book was released on 2017-11-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of T.J.T. Spanos's previous book The Thermophysics of Porous Media, The Physics of Composite and Porous Media explains non-linear field theory that describes how physical processes occur in the earth. It describes physical processes associated with the interaction of the various phases at the macroscale (the scale at which continuum equations are established) and how these interactions give rise to additional physical processes at the megascale (the scale orders of magnitude larger at which a continuum description may once again be established). Details are also given on how experimental, numerical and theoretical work on this subject fits together. This book will be of interest to graduate students and academic researchers working on understanding the physical process in the earth, in addition to those working in the oil and hydrogeology industries.

Download or read book Diversity of Hydrothermal Systems on Slow Spreading Ocean Ridges written by Peter A. Rona and published by John Wiley & Sons. This book was released on 2013-05-02 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the American Geophysical Union as part of the Geophysical Monograph Series, Volume 188. Diversity of Hydrothermal Systems on Slow Spreading Ocean Ridges presents a multidisciplinary overview of the remarkable emerging diversity of hydrothermal systems on slow spreading ocean ridges in the Atlantic, Indian, and Arctic oceans. When hydrothermal systems were first found on the East Pacific Rise and other Pacific Ocean ridges beginning in the late 1970s, the community consensus held that the magma delivery rate of intermediate to fast spreading was necessary to support black smoker-type high-temperature systems and associated chemosynthetic ecosystems and polymetallic sulfide deposits. Contrary to that consensus, hydrothermal systems not only occur on slow spreading ocean ridges but, as reported in this volume, are generally larger, exhibit different chemosynthetic ecosystems, produce larger mineral deposits, and occur in a much greater diversity of geologic settings than those systems in the Pacific. The full diversity of hydrothermal systems on slow spreading ocean ridges, reflected in the contributions to this volume, is only now emerging and opens an exciting new frontier for ocean ridge exploration, including Processes of heat and chemical transfer from the Earth's mantle and crust via slow spreading ocean ridges to the oceans The major role of detachment faulting linking crust and mantle in hydrothermal circulation Chemical reaction products of mantle involvement including serpentinization, natural hydrogen, abiotic methane, and hydrocarbon synthesis Generation of large polymetallic sulfide deposits hosted in ocean crust and mantle Chemosynthetic vent communities hosted in the diverse settings The readership for this volume will include schools, universities, government laboratories, and scientific societies in developed and developing nations, including over 150 nations that have ratified the United Nations Convention on the Law of the Sea.