Download or read book Counterfeit Parts and Their Impact on the Supply Chain written by Kirsten M Koepsel and published by SAE International. This book was released on 2018-11-15 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why should the supply chain be concerned if their buyers or subcontractors are purchasing counterfeit electronic parts or if their products contain counterfeit electronic parts? If these parts end up in items that are safety critical and security-risk sensitive such as aviation, space, and defense products, whole secure systems can be comprised. As organizations have become aware of counterfeit parts, one of their responses may be to test upon acceptance or prior to receipt. But testing alone may not detect all counterfeits. Possible sources of counterfeits include products that did not meet quality control requirements and were not destroyed, overruns sold into the market place, unauthorized production shifts, theft, and e-waste. The counterfeited electronic part ends up in the supply chain when ordered by an unsuspecting buyer, who does not confirm the originating source of the part. The second edition of Counterfeit Parts and Their Impact on the Supply Chain expands on the latest insights of what is really happening in the world of supply chains, quality monitoring and testing, counterfeiting mitigation and avoidance strategy. It brings new light into the consequences of weak supply-chain monitoring and how costs, reliability and reputation are negatively impacted by counterfeit products and components.
Download or read book Counterfeit Electronic Parts and Their Impact on Supply Chains written by Kirsten M Koepsel and published by SAE International. This book was released on 2014-10-20 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic parts are used throughout industry to run everyday products, such as cell phones, and also highly technical products, such as aircraft, missiles, and spacecraft. Unlike cell phones, which are often replaced every year, the highly technical products may remain in service from 20 to more than 80 years. But what happens if the original electronic part, with a life cycle of 18 months, is no longer available? Some manufacturers have discovered that they have unwittingly purchased counterfeit ones. Counterfeit Electronic Parts and Their Impact on Supply Chains examines how these items are negatively affecting the aviation, spacecraft, and defense sectors and what can be done about it. As the inflow of counterfeit electronic parts does not appear to be slowing down, Counterfeit Electronic Parts and Their Impact on Supply Chains investigates the possible solutions to combat the issue, including legislation and standards, and other solutions that are government driven but that may be impacted by continuing budget cuts. The book also presents a high-level compilation of supply chain best practices identified in a survey of electronic parts manufacturers and government contractors. It is a must-read for those interested in a comprehensive review of the challenge of counterfeit electronic parts and the consequences of their use in both consumer and industrial products.
Download or read book Counterfeit Electronic Parts Avoidance Detection Mitigation and Disposition written by G-19 Counterfeit Electronic Parts Committee and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard standardizes practices to: amaximize availability of authentic parts, bprocure parts from reliable sources, cassure authenticity and conformance of procured parts, dcontrol parts identified as counterfeit, eand report counterfeit parts to other potential users and Government investigative authorities. This standard was created in response to a significant and increasing volume of counterfeit electronic parts entering the aerospace supply chain, posing significant performance, reliability, and safety risks.This standard was created to provide uniform requirements, practices and methods to mitigate the risks of receiving and installing counterfeit electronic parts.
Download or read book Counterfeit Integrated Circuits written by Mark (Mohammad) Tehranipoor and published by Springer. This book was released on 2015-02-12 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely and exhaustive study offers a much-needed examination of the scope and consequences of the electronic counterfeit trade. The authors describe a variety of shortcomings and vulnerabilities in the electronic component supply chain, which can result in counterfeit integrated circuits (ICs). Not only does this book provide an assessment of the current counterfeiting problems facing both the public and private sectors, it also offers practical, real-world solutions for combatting this substantial threat. · Helps beginners and practitioners in the field by providing a comprehensive background on the counterfeiting problem; · Presents innovative taxonomies for counterfeit types, test methods, and counterfeit defects, which allows for a detailed analysis of counterfeiting and its mitigation; · Provides step-by-step solutions for detecting different types of counterfeit ICs; · Offers pragmatic and practice-oriented, realistic solutions to counterfeit IC detection and avoidance, for industry and government.
Download or read book Counterfeit Parts and Their Impact on Supply Chains written by Kirsten M. Koepsel and published by . This book was released on 2018 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book expands on the latest insights of what is really happening in the world of supply chains, quality monitoring and testing, counterfeiting mitigation and avoidance strategy. It brings new light into the consequences of weak supply-chain monitoring and how costs, reliability and reputation are negatively impacted by counterfeit products and components.
Download or read book The Committee s Investigation Into Counterfeit Electronic Parts in the Department of Defense Supply Chain written by United States. Congress. Senate. Committee on Armed Services and published by . This book was released on 2012 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Counterfeit Parts in the Department of Defense Supply Chain written by Erik Dawson and published by . This book was released on 2016 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Defense (DOD) supply chain is vulnerable to the risk of counterfeit parts, which have the potential to delay missions and ultimately endanger service members. To effectively identify and mitigate this risk, DOD began requiring its agencies in 2013 and its contractors in 2014, to report data on suspect counterfeit parts. This book examines, among other things, the use of the Government-Industry Data Exchange Program (GIDEP) to report counterfeits; GIDEP's effectiveness as an early warning system; and DOD's assessment of defense contractors' systems for detecting and avoiding counterfeits.
Download or read book Fraudulent Counterfeit Electronic Parts Avoidance Detection Mitigation and Disposition Distributors written by G-19 Counterfeit Electronic Parts Committee and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard standardizes practices to: aidentify reliable sources to procure parts, bassess and mitigate risk of distributing fraudulent/counterfeit parts, ccontrol suspect or confirmed fraudulent/counterfeit parts, dand report suspect and confirmed fraudulent/counterfeit parts to other potential users and Authority Having Jurisdiction. This standard was created in response to a significant and increasing volume of fraudulent/counterfeit electronic parts entering the aerospace supply chain, posing significant performance, reliability, and safety risks. This standard was created to provide uniform requirements, practices and methods to mitigate the risks of purchasing and supplying fraudulent/counterfeit electronic parts.
Download or read book Defense Supplier Base written by Belva Martin and published by DIANE Publishing. This book was released on 2010-11 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: Counterfeit parts -- generally those whose sources knowingly misrepresent the parts' identity or pedigree -- have the potential to seriously disrupt the DoD supply chain, delay missions, and affect the integrity of weapon systems. Almost anything is at risk of being counterfeited, from fasteners used on aircraft to electronics used on missile guidance systems. Further, there can be many sources of counterfeit parts as DoD draws from a large network of global suppliers. This report examined: (1) DoD's knowledge of counterfeit parts in its supply chain; (2) DoD processes to detect and prevent counterfeit parts; and (3) commercial initiatives to mitigate the risk of counterfeit parts. Includes recommendations. Charts and tables.
Download or read book Dod Supply Chain written by Government Accountability Office and published by Createspace Independent Publishing Platform. This book was released on 2017-08-08 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: " Counterfeit parts-generally the misrepresentation of parts' identity or pedigree-can seriously disrupt the Department of Defense (DOD) supply chain, harm weapon systems integrity, and endanger troops' lives. In a November testimony (GAO-12-213T), GAO summarized preliminary observations from its investigation into the purchase and authenticity testing of selected, military-grade electronic parts that may enter the DOD supply chain. As requested, this report presents GAO's final findings on this issue. The results are based on a nongeneralizable sample and cannot be used to make inferences about the extent to which parts are being counterfeited. GAO created a fictitious company and gained membership to two Internet platforms providing access to vendors selling military-grade electronic parts. GAO requested quotes from numerous vendors to purchase a total of 16 parts from three categories: (1) authentic part numbers for obsolete and rare parts; (2) authentic part numbers with postproduction date codes (date codes after the last date the part was manufactured); and (3) bogus, or fictitious, part numbers that are not associated with any authentic parts. To determine whether the parts received were counterfeit, GAO contracted with a qualified, independent testing lab for full component authentication analysis of the first two categories of parts, but not the third (bogus) category. Part numbers have been altered for"
Download or read book Counterfeit Goods and Organised Crime written by Michael Blakeney and published by Edward Elgar Publishing. This book was released on 2023-12-11 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Counterfeit Goods and Organised Crime is an in-depth inquiry into the fake goods trade and the involvement of organised crime groups. In this seminal work, Michael Blakeney comprehensively analyses the impact of counterfeiting on the principal industries affected by it. It looks at international, national and regional counterfeit legislation, organised crime groups and counterfeiting customs control.
Download or read book Counterfeit Parts in the Department of Defense Supply Chain written by Erik Dawson and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Defense (DOD) supply chain is vulnerable to the risk of counterfeit parts, which have the potential to delay missions and ultimately endanger service members. To effectively identify and mitigate this risk, DOD began requiring its agencies in 2013 and its contractors in 2014, to report data on suspect counterfeit parts. This book examines, among other things, the use of the Government-Industry Data Exchange Program (GIDEP) to report counterfeits; GIDEPs effectiveness as an early warning system; and DODs assessment of defense contractors systems for detecting and avoiding counterfeits.
Download or read book Inquiry Into Counterfeit Electronic Parts in the Department of Defense Supply Chain written by Committee on Armed Services United States Senate and published by CreateSpace. This book was released on 2015-01-12 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: In March of 2011, the Senate Armed Services Committee initiated an investigation into counterfeit electronic parts in the Department of Defense (DOD) supply chain. The investigation uncovered overwhelming evidence of large numbers of counterfeit parts making their way into critical defense systems. It revealed failures by defense contractors and DOD to report counterfeit parts and gaps in DO D's knowledge of the scope and impact of such parts on defense systems. The investigation exposed a defense supply chain that relies on hundreds of unvetted independent distributors to supply electronic parts for some of our most sensitive defense systems. And, it found overwhelming evidence that companies in China are the primary source of counterfeit electronic parts in the defense supply chain.
Download or read book Fraudulent Counterfeit Electronic Parts Avoidance Detection Mitigation and Disposition written by G-19 Counterfeit Electronic Parts Committee and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard standardizes practices to: amaximize availability of authentic parts, bprocure parts from reliable sources, cassure authenticity and conformance of procured parts, dcontrol suspect or confirmed fraudulent/counterfeit EEE parts, eand report suspect or confirmed fraudulent/counterfeit EEE parts to other potential users and Authority Having Jurisdiction. fand assess, mitigate, control, and report parts which have been used, refurbished, or reclaimed, but represented as new product. This standard was originally created in response to a significant and increasing volume of fraudulent/counterfeit electronic parts entering the aerospace supply chain, posing significant performance, reliability and safety risks. This document has subsequently been expanded to address fraudulent/counterfeit risk mitigation on a global scale across multi-sector electronic supply chain industries and to provide uniform requirements, practices and methods to mitigate the risks of receiving and installing fraudulent/counterfeit electronic parts.
Download or read book Counterfeit Parts written by United States Government Accountability Office and published by Createspace Independent Publishing Platform. This book was released on 2017-09-26 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DOD supply chain is vulnerable to the risk of counterfeit parts, which have the potential to delay missions and ultimately endanger service members. To effectively identify and mitigate this risk, DOD began requiring its agencies in 2013 and its contractors in 2014, to report data on suspect counterfeit parts. A Senate report included a provision for GAO to review DOD's efforts to secure its supply chain from counterfeit parts. This report examines, among other things, (1) the use of GIDEP to report counterfeits, (2) GIDEP's effectiveness as an early warning system, and (3) DOD's assessment of defense contractors' systems for detecting and avoiding counterfeits. GAO analyzed data from GIDEP for fiscal years 2011 through 2015; reviewed DOD policies, procedures, and documents; and met with agency officials and seven selected contractors based on dollar value from contracts that included a new counterfeit clause.
Download or read book Illicit Trade Dangerous Fakes Trade in Counterfeit Goods that Pose Health Safety and Environmental Risks written by OECD and published by OECD Publishing. This book was released on 2022-03-17 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illicit trade in counterfeit goods causes economic damage by reducing sales and profits as well as innovation incentives in legitimate industries. This study presents detailed information on the value of counterfeit trade in such dangerous fake goods, analyses changes in the volumes and composition of the goods, and maps key trade routes.
Download or read book Counterfeit Medicines Policy economics and countermeasures written by Albert I. Wertheimer and published by ILM Publications. This book was released on 2012 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Discusses the economic and financial consequences of pharmaceutical product counterfeiting and describes some of the measures that can be taken to counteract their impact"--Provided by publisher.
