Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. 600 bibliographic references provide a comprehensive guide to over 100 years of related study Providing practical applications to the reader across many industries Accessible to both the beginner and the expert
Download or read book Corrosion Resistance of Aluminum and Magnesium Alloys written by Edward Ghali and published by John Wiley & Sons. This book was released on 2010-05-05 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable information on corrosion fundamentals and applications of aluminum and magnesium Aluminum and magnesium alloys are receiving increased attention due to their light weight, abundance, and resistance to corrosion. In particular, when used in automobile manufacturing, these alloys promise reduced car weights, lower fuel consumption, and resulting environmental benefits. Meeting the need for a single source on this subject, Corrosion Resistance of Aluminum and Magnesium Alloys gives scientists, engineers, and students a one-stop reference for understanding both the corrosion fundamentals and applications relevant to these important light metals. Written by a world leader in the field, the text considers corrosion phenomena for the two metals in a systematic and parallel fashion. The coverage includes: The essentials of corrosion for aqueous, high temperature corrosion, and active-passive behavior of aluminum and magnesium alloys The performance and corrosion forms of aluminum alloys The performance and corrosion forms of magnesium alloys Corrosion prevention methods such as coatings for aluminum and magnesium Electrochemical methods of corrosion investigation and their application to aluminum and magnesium alloys Offering case studies and detailed references, Corrosion Resistance of Aluminum and Magnesium Alloys provides an essential, up-to-date resource for graduate-level study, as well as a working reference for professionals using aluminum, magnesium, and their alloys.
Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1993-01-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop reference is a tremendous value and time saver for engineers, designers and researchers. Emerging technologies, including aluminum metal-matrix composites, are combined with all the essential aluminum information from the ASM Handbook series (with updated statistical information).
Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Woodhead Publishing. This book was released on 2007-05-17 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships' hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures.Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials.
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book Corrosion Resistance of Aluminium and Aluminium Alloys written by Michael Schütze and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the widespread information on the topic, this handbook and ready reference is clearly structured according to the various media that can corrode and damage aluminium and aluminium compounds, while also discussing methods of prevention. With its coverage of multi-talented compounds and energy-saving materials, this is a must-have for all those working in the relevant industries.
Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater
Download or read book Aluminium Alloys and Composites written by Kavian Cooke and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium (Al) is a metal of great importance because of its excellent corrosion resistance, high electrical and thermal conductivity, good reflectivity, and very good recycling characteristics. The properties of heat-treatable Al-alloys can be further enhanced by the inclusion of a reinforcing phase that increases the mechanical properties of the overall composite. This book is a comprehensive guide on the different types of aluminum alloys and the new advances that have been made in developing and manufacturing aluminum alloys and composites. This text provides a comprehensive overview of the processing, formability, and chemical composition of aluminum alloys and composites. Part One is focused on evaluating the types and properties of advanced aluminum alloys and composites, while Part Two explores characterization. The advantage of this book is that it provides a detailed review of major advances that have occurred in the development and application of aluminum alloys and composites while outlining a development strategy for these materials.
Download or read book Introduction to Aluminum Alloys and Tempers written by J. Gilbert Kaufman and published by ASM International. This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines characteristics of wrought and cast aluminum alloys, then presents basic aluminum alloy and temper designation systems, as developed by the Aluminum Association, and explains them with examples. Wrought and cast aluminum designations are treated in a similar fashion. Processes used to produce aluminum alloy products are described briefly, and representative applications for aluminum alloys and tempers are detailed, in areas such as electrical markets, building and construction, marine and rail transportation, packaging, and petroleum and chemical industry components. A final chapter presents 65 pages of bandw micrographs illustrating the microstructure of a range of aluminum alloys and tempers, to assist in understanding consequences of applying the production technology implied by the temper designations. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book New Methods for Corrosion Testing of Aluminum Alloys written by Vinod S. Agarwala and published by ASTM International. This book was released on 1992 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluates the usefulness of the current standards on exfoliation and corrosion testing of aluminum alloys and their applicability to new requirements and advanced alloys. The 13 papers, from an international symposium in San Francisco, May 1990, discuss whether the existing standards should be revis
Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-12-16 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. 600 bibliographic references provide a comprehensive guide to over 100 years of related study Providing practical applications to the reader across many industries Accessible to both the beginner and the expert
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-04-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Mechanical Alloying And Milling written by Cury Suryanarayana and published by CRC Press. This book was released on 2004-09-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the broad field of mechanical alloying from a scientific and technological perspective to form a timely and comprehensive resource valuable to both students and researchers. The treatment progresses from the historical background through a description of the process, the different metastable effects produced, and the mechanisms of
Download or read book Special Issue on Corrosion Resistance of Aluminium Alloys written by and published by . This book was released on 1997 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt:
