Download or read book Handbook of Corrosion Inhibitors written by Michael Ash and published by . This book was released on 2001 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes almost 3800 trade name and generic chemicals used to prevent and remove corrosion and rust. Coverage includes chemicals that function as:Acid inhibitors; Antideposition aids; Corrosion inhibitors; Corrosion and rust intermediates; Dispersants; Film-formersRust inhibitors; Rust removers; Neutralizers; Metal deactivators; Oxygen scavengers; pH adjusters; Phosphatizers Protectants; Scale inhibitors; Water repellentsIn these Application Areas: Boiler water systems; Cement/Concrete; Consumer packaging; Cooling water systems; Dry cleaning processes Ferrous/Nonferrous metals; Food processing; Fuel additives Industrial/Consumer equipment; Lubricating systems Metalworking fluids; Oil field applications; Paints/Coatings Pigments Pulp/Paper processing; Wastewater treatment.
Download or read book Corrosion Inhibitors written by Ernest W. Flick and published by William Andrew. This book was released on 1987 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes more than 1100 corrosion inhibitors and rust preventives which are currently available for industrial usage. The data included represent selections from manufacturers' descriptions, made at no cost to, nor influence from, the makers or distributors of these materials. Only the most recent information has been included. It is believed that all of the products listed here are currently available, which will be of interest to readers concerned with product discontinuances. This book should be a valuable guide to those interested in products to help alleviate corrosion. Products are presented by company. Also included is a Trade Name Index and Suppliers' Addresses. The book lists the following product information: (1) Company name and product category. (2) Trade name and product numbers. (3) Product Description: a description of the product, and its use.
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book Corrosion of Linings Coatings written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2006-12-21 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instead of using expensive alloys to construct a tank or processing vessel, it is often more economical to use a less expensive metal, such as carbon steel, and install a lining to provide protection from corrosion. Corrosion of Linings and Coatings: Cathodic and Inhibitor Protection and Corrosion Monitoring offers focused coverage for professionals interested in protective linings and coatings, corrosion protection, and monitoring techniques. The author details various materials and methods for controlling and protecting against corrosion. He discusses the use of mortars, grouts, and monolithic surfaces and explains how the use of inhibitors and cathodic protection help prevent corrosion. The book also provides details for various types of linings materials and coatings and includes valuable compatibility charts for each material covered. The author concludes with an explanation of a variety of corrosion monitoring techniques currently available.
Download or read book Corrosion Inhibitors written by Esther Hart and published by Nova Science Publishers. This book was released on 2016 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses principles, mechanisms and applications of corrosion inhibitors. Chapter One focuses on organic corrosion inhibitors and their industrial applications. Chapter Two explores the application of polymer composites and nanocomposites as corrosion inhibitors for different metal substrates in different corrosive media. Chapter Three provides a review of corrosion inhibitors and a progress towards use of environmentally friendly corrosion inhibitors in the amine-based CO2 absorption process for acid gas treatment and carbon capture. Chapter Four studies the effectiveness of copaiba oil loaded on microemulsion systems as green corrosion inhibitors. Chapter Five addresses the mechanism of corrosion for APMMCs, and discusses different methods of inhibition to corrosion for APMMCs. Chapter Six focuses on the eletrochemical study of 1,3,4-triazolium-2-thiol as a corrosion inhibitor of mild steel in saline medium
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-01-29 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Green Corrosion Inhibitors written by V. S. Sastri and published by John Wiley & Sons. This book was released on 2012-02-14 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book to cover developments in corrosion inhibitors is long overdue. This has been addressed by Dr Sastri in a book which presents fundamental aspects of corrosion inhibition, historical developments and the industrial applications of inhibitors. The book deals with the electrochemical principles and chemical aspects of corrosion inhibition, such as stability of metal complexes, the Hammett equation, hard and soft acid and base principle, quantum chemical aspects and Hansch' s model and also with the various surface analysis techniques, e.g. XPS, Auger, SIMS and Raman spectroscopy, that are used in industry for corrosion inhibition. The applications of corrosion inhibition are wide ranging. Examples given in this book include: oil and gas wells, petrochemical plants, steel reinforced cement, water cooling systems, and many more. The final chapters discuss economic and environmental considerations which are now of prime importance. The book is written for researchers in academia and industry, practicing corrosion engineers and students of materials science, engineering and applied chemistry.
Download or read book Long term Performance of Corrosion Inhibitors Used in Repair of Reinforced Concrete Bridge Components written by Moavin Islam and published by DIANE Publishing. This book was released on 2003 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the project was to determine the effectiveness of cathodic protection, electrochemical chloride extraction, and corrosion-inhibitor treatment systems installed during the SHRP effort through the long-term evaluation of 32 field test sites and a number of laboratory concrete slab specimens. The FHWA program required monitoring the long-term performance of corrosion inhibitor treatments on selected components of four bridges that were treated and evaluated under SHRP C-103. Three evaluations over a period of 5 years were conducted on structures located in Minnesota, New York and Pennsylvania, and two evaluations were conducted on a structure in Washington State. An analysis of the results concluded that neither of the corrosion inhibitors evaluated in this study, using the specified repairs and exposed to the specific environments, provided any corrosion-inhibiting benefit. Shrinkage cracking plagued repairs at all test sites except for the Washington site.
Download or read book Corrosion in the Petrochemical Industry written by Linda Garverick and published by ASM International. This book was released on 1994-01-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H
Download or read book Corrosion Inhibitors Principles and Recent Applications written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-04-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To protect metals or alloys from corrosion, some methods can be used such as isolating the structure from the aggressive media or compensating the loss of electrons from the corroded structure. The use of corrosion inhibitors may include organic and inorganic compounds that adsorb on the metallic structure to isolate it from its surrounding media to decrease oxidation-reduction processes. This book collects new developments about corrosion inhibitors and their recent applications.
Download or read book Corrosion of Stainless Steels written by A. John Sedriks and published by John Wiley & Sons. This book was released on 1996-04-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete, Up-to-Date Introduction to Corrosion of StainlessSteels and Metallurgical Factors This fully updated Second Editionof Corrosion of Stainless Steels covers the tremendous advancesmade with stainless steels in recent decades, includingapplications in many new areas--from marine technologies andoff-shore oil production to power plants and the kitchen sink. Thisbook offers unique insights into the corrosion mechanisms affectingstainless steels, details problem-avoidance strategies, and helpsidentify corrosion-resistant capabilities for these remarkablealloys Sponsored by the Electrochemical Society, Corrosion osStainless Steels * Provides a comprehensive introduction to the selection,development, and production of all types of stainless steels * Emphasizes how metallurgical factors affect corrosionresistance * Examines the limitations of stainless steels within the contextof a discussion on higher alloys * Takes an interdisciplinary approach that demonstrates thecombined effects of metallurgy, chemistry, and electrochemistry oncorrosion resistance * Provides baseline knowledge and testing standards for stainlesssteels, and facilitates failure analysis for industrial purposes orlitigation related to equipment failure This is a much-needed text for materials scientists, chemicalengineers, corrosion specialists, graduate students, and anyone whoneeds to be brought up to date on this subject.
Download or read book Eco Friendly Corrosion Inhibitors written by Lei Guo and published by Elsevier. This book was released on 2022-06-21 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-Friendly Corrosion Inhibitors: Principles, Designing, and Applications wraps up new developments in corrosion inhibitors and their current applications in real-life environments such as in strong acidic pickling and petroleum-based liquids. The book covers several types of environmentally-friendly corrosion inhibitors in detail. In addition, it highlights both established research and technology on industrial scale corrosion inhibitors and their rapidly emerging aspects and future research directions. Provides fundamental basics and applied practices of corrosion prevention at industrial scale Serves as a valuable reference for scientists and engineers who are searching modern design for industrial scale corrosion inhibitors Focuses on the most advanced industrial scale corrosion inhibitors, including current challenges during manufacturing Includes up-to-date reference material such as websites of interest and information about the latest research
Download or read book Corrosion and Corrosion Protection Handbook Second Edition written by Schweitzer and published by CRC Press. This book was released on 1988-12-12 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing to provide excellent, state-of-the-art information on corrosion and practicalsolutions for reducing corrosion, the Second Edition contains valuable suggestionson how to select the best construction material for a specific application . . . choose anappropriate initial design to avoid inherent corrosion pitfalls . .. determine whatcorrosion problems may exist or develop, as well as the possible extent of the problems. .. and establish practices to monitor corrosion of existing equipment.In addition to significantly revising and expanding all chapters to reflect recent progressin the field, such as the development of materials for pollution control and methods ofcontrolling/preventing corrosion, Corrosion and Corrosion ProtectionHandbook, Second Edition features detailed discussions on such new topics asatmospheric corrosion, designing to prevent corrosion, sheet linings, and corrosioninhibitors.
Download or read book Corrosion and Its Control written by H. VanDroffelaar and published by National Assn of Corrosion Engineers. This book was released on 1994-12-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text that emphasizes the engineering aspects of corrosion and its control in ways helpful to practicing engineers, based on notes used by the authors for an advanced undergraduate engineering course at Queen's U., Kingston, Ontario. This revised and expanded edition places particular emphasis on u
Download or read book Galvanic Corrosion written by Roger Francis and published by Nace International. This book was released on 2001 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uhlig s Corrosion Handbook written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanomaterials, and dental materials, anodic protection. Also featured are chapters dealing with standards for corrosion testing, microbiological corrosion, and electrochemical noise.
