Download or read book Corrosion and Protection of Marine Engineering Materials written by Nan Sheng and published by China's Major Science and Tech. This book was released on 2020-10-31 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conventional anticorrosive coatings which are based on heavy metals such as chromium, zinc and copper are toxic to the environment. There has been a need to find suitable replacement coatings to be environmentally friendly and effective to inhibit corrosion of steels. Conductive polymers have acquired more attentions in the last years due to their environmentally benign nature and high effectiveness to protect steels against corrosion. In this book, the conducting polymer were briefly introduced including the history, synthesis and conducting mechanism. Then conducting polymer especially based on PPy coatings in corrosion protection was discussed, and several proposed protection mechanisms was introduced for understanding the protection of conducting polymer. Then, the works of the past ten years about conducting polymer of our group in the corrosion protection, such as, steel, copper, zinc and other different metal surface were reviewed and studied. Some recent works about the marine antifouling and marine heavy-protective coatings by conducting polymer and graphene/conducting polymer composites are also introduced in this book.

Download or read book Corrosion and Protection of Marine Engineering Materials written by Yanhua Lei and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a basic introduction to the application of conductive polymer in corrosion protection, especially for marine environment corrosion protection research. Conventional anticorrosive coatings which are based on heavy metals such as chromium, zinc and copper are toxic to the environment. There has been a need to find suitable replacement coatings that are environmentally friendly as well as effective in inhibiting corrosion of steel. Conductive polymers have garnered much attention recent years due to their environmentally benign nature and high effectiveness in protecting against corrosion. This book introduces the history of these conductive polymers. The applications of conducting polymers, polymer composites and nanocomposites for corrosion protection of different industrial metal substrates are explored based on reported experimental data and their mechanism of inhibition explained. This book also includes overviews of some recent works on marine antifouling, marine heavy-protective coatings, waterborne paints by conducting polymer and inorganic composites. Conducting polymers and its family of stimuli-actuated polymers exhibit excellent application prospects in the field of anticorrosion, antibacterial, anti-biofouling, and waterborne based coatings. This book will be of great interest to students, scholars, and professionals alike in the field of Corrosion Engineering and Material Science"--

Download or read book Corrosion and Protection of Marine Engineering Materials written by Yanhua LEI and published by CRC Press. This book was released on 2023-05-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basic introduction to the application of conductive polymers in corrosion protection, especially for marine environment corrosion protection research. Conventional anticorrosive coatings, which are based on heavy metals such as chromium, zinc, and copper, are toxic to the environment. There has been a need to find suitable replacement coatings that are environmentally friendly as well as effective in inhibiting the corrosion of steel. Conductive polymers have garnered much attention in recent years due to their environmentally benign nature and high effectiveness in protecting against corrosion. This book introduces the history of these conductive polymers. The applications of conducting polymers, polymer composites, and nanocomposites for corrosion protection of different industrial metal substrates are explored based on reported experimental data, and their mechanism of inhibition is explained. This book also includes overviews of some recent works on marine antifouling, marine heavy-protective coatings, and waterborne paints by conducting polymer and inorganic composites. Conducting polymers and their family of stimuli-actuated polymers exhibit excellent application prospects in the fields of anticorrosion, antibacterial, antibiofouling, and waterborne-based coatings. This book will be of great interest to students, scholars, and professionals alike in the field of corrosion engineering and material science.

Download or read book Corrosion and Protection written by Einar Bardal and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Protection is an essential guide for mechanical, marine and civil engineering students and also provides a valuable reference for practicing engineers. Bardal combines a description of practical corrosion processes and problems with a theoretical explanation of the various types and forms of corrosion, with a central emphasis on the connections between practical problems and basic scientific principles. This well thought-out introduction to corrosion science, with excellent examples and useful tables, is also extremely well illustrated with 167 diagrams and photographs. Readers with a limited background in chemistry can also find it accessible.

Download or read book Marine Corrosion written by and published by . This book was released on 1977 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials in Marine Technology written by Robert L. Reuben and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in Marine Technology covers the important aspects of metallurgy and materials engineering which must be taken into account when designing for marine environments. The purpose is to aid materials selection and the incorporation of materials data into the design, manufacture and inspection strategy. Recent advances in materials technology, including the use of new materials for marine applications Alloys, Polymers and Composites are examined in detail. The integrated approach is design oriented and is supported by recent case studies.

Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-07 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 2: Corrosion Protection Measures offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book extensively discusses corrosion phenomena and corrosion types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relevant to their performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation, and fouling, are discussed. With respect to protective coatings, the book considers, for the first time, complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book will be of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers, chemists, and coating specialists. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, namely foundations, towers, internal sections, connection flanges, and transformation platforms

Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater

Download or read book Materials for Marine Systems and Structures written by Dennis F. Hasson and published by Elsevier. This book was released on 2013-10-22 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 28: Materials for Marine Systems and Structures provides an integrated approach, utilizing the environmental information of the ocean scientists, materials science, and structural integrity principles as they apply to offshore structures and ships. The book discusses the materials and their performance in marine systems and structures; the marine environment; and marine befouling. The text also describes marine corrosion; corrosion control; metallic materials for marine structures; and concrete marine structures. Materials for mooring systems and fracture control for marine structures are also considered. Professional scientists and engineers, as well as graduate students in the fields of ocean and marine engineering and naval architecture and associated fields will find the book useful.

Download or read book Marine and Offshore Corrosion written by Kenneth A Chandler and published by Elsevier. This book was released on 2014-05-12 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine and Offshore Corrosion describes the principles of effective corrosion control treatments in marine environments, with emphasis on economic solutions to corrosion. The book explains chemical or electrochemical reaction of an alloy with its environment leading to corrosion, and mechanical loss of the metal by erosion, abrasion, or wear resulting also in corrosion. A main consideration of erosion control that the engineer should look into is the economic side. Other considerations that he should investigate are the strength of a structure, time for construction, availability of materials, and costs. The book also discusses the marine environment consisting of sea water, temperature fluctuations, dissolved gases, hydrogen sulphide, ammonia, carbon dioxide, electrical conductivity, fouling. The text describes the selection of materials to be used in marine environments, surface preparation of steel before painting, the type of paint, and metallic coatings. Some of the factors in selecting coating systems are: cost and estimated life before the first scheduled maintenance, adhesion properties, moisture tolerance, elasticity, chemical resistance, impact resistance, bacterial resistance. The factors affecting maintenance include environmental conditions, quality of initial protection applied, type of structure, as well as the design and purpose of the structure. The book has been prepared for engineers and designers who are not corrosion specialists but have to deal with marine corrosion problems as part of their day-to-day professional activities. The text will also turn out to be useful for engineers with general interest in structure, building, or machinery maintenance specially those located near coastal areas.

Download or read book LaQue s Handbook of Marine Corrosion written by David A. Shifler and published by John Wiley & Sons. This book was released on 2022-07-01 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.

Download or read book Developments in Marine Corrosion written by S A Campbell and published by Elsevier. This book was released on 1998-10-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The diversity of subjects involved in marine corrosion and fouling processes are evident in the approaches and techniques described in this book. An improvized understanding of biologically influenced corrosion and fouling processes is essential to the development of better corrosion protection systems, and this book shows new perspectives in our appreciation of these subjects. Equally, powerful microscope imaging, surface spectroscopy and electrochemical techniques have become available and are providing new information on metal surfaces experiencing fouling or microbial corrosion. Examples include confocal laser microscopy, scanning probe microscopy, Fourier Transform infrared spectroscopy, scanning electrochemical microscopy and scanning (or vibrating) reference electrode techniques. Advances in knowledge of biocorrosion processes have enabled improvements in corrosion monitoring and protection strategies. Examples include metal or polymer coatings and the use of corrosion inhibitors and biocides. This book aims to provide a contribution to existing literature on biocorrosion in the marine environment.

Download or read book Handbook of Oceanographic Engineering Materials written by Stephen C. Dexter and published by John Wiley & Sons. This book was released on 1979-05-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on the properties, availability, and cost of metals, alloys, plastics, and other nonmetallic materials used in seawater environments. Contains tabulations of all the materials covered, ranked according to selected mechanical and physical properties, corrosion resistance, and cost. Describes mechanical and physical properties, behavior in marine environments, available forms, fabricality, and typical uses of each material. Discusses advantages, restrictions, and necessary precautions involved in using each material in or around seawater.

Download or read book Microbiologically Influenced Corrosion written by Reza Javaherdashti and published by Springer. This book was released on 2016-09-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly extended from the first edition, this book presents the basics of microbiologically influenced corrosion (MIC) in an accessible and concise manner. It explores strategies for recognizing, understanding, mitigating and preventing this type of corrosion, and investigates this topic from the point of view of an engineer. Chapters cover issues including stress corrosion cracking and microbial corrosion, the pros and cons of biocides, the involvement of magnetic bacteria in microbial corrosion, and cathodic protection based on recent research in microbial environments. The 2nd Edition provides new material examining the following topics: *The corrosion-related bacteria clostridia *Mathematical modelling of MIC, in particular fuzzy logic *A comparison of culture-independent methods with culture-dependent methods *Further practical strategies for dealing with MIC *Natural biocidesThis book has provided course material for the author’s microbial corrosion workshops around the world, and it presents an invaluable resource to corrosion and integrity professionals working in a wide range of industries including power generation, oil and gas, marine, and mining. It is also intended for students and academics of corrosion engineering, materials science, microbiology, chemical engineering and welding.

Download or read book Materials Corrosion and Protection written by Yongchang Huang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-02-05 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces corrosion mechanisms and protection technologies for metallic and non-metallic materials. A focus lies on the protection of high-tech materials with applications in space and environments exposed to unclear radiation and biological hazards. The determination, measurement and control of different corrosion mechanisms are discussed in detail. Combining theories with case studies, it is an essential reference for material scientists and engineers.

Download or read book Corrosion and Protection of Materials written by Marina Cabrini and published by MDPI. This book was released on 2021-04-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty articles on various topics related to the corrosion and protection of metallic materials. This topic is of strong actuality both due to the aging of plants and infrastructures that require checks and maintenance, and to the use of traditional materials in increasingly aggressive environments, added to the need of changing the current anti-corrosion systems with less environmental impact methods. Finally, the new development of innovative materials, such as additive manufacturing or high-entropy alloys, needs the characterization of their corrosion behavior. In this issue, there are works on new alloys obtained for additive manufacturing or high entropy, on the study of corrosion and stress corrosion cracking and hydrogen embrittlement mechanisms, through electrochemical and microscopical techniques, studies on low environmental impact inhibitors and biocides, as well as ceramic and metal protective coatings. Finally, there are works on the study of the residual mechanical resistance of corroded infrastructures and on monitoring and non-destructive control. In this way, the book therefore offers a somewhat varied panorama of research trends in the field.

Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-06 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms