Download or read book Environmental Degradation of Metals written by U.K. Chatterjee and published by CRC Press. This book was released on 2001-03-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical reference presents for the first time in a single volume all types of environmental degradation a metallic compound may undergo during its processing, storage, and service. Clarifying general and localized corrosion effects, Environmental Degradation of Metals describes the effects of atmospheric exposure, high-temperature gases, soil, water, weak and strong chemicals, liquid metals, and nuclear radiation. It determines whether corrosion can occur under a given set of conditions, shows how improvements in component design can reduce corrosion, and details the high- and low-temperature effects of oxidizing agents. The book also investigates the instantaneous and delayed failure of solid metal in contact with liquid metal, highlights the influence of hydrogen on metal, and profiles radiation effects on metal.
Download or read book Corrosion and Degradation of Metallic Materials written by François Ropital and published by Editions technip. This book was released on 2010 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second section describes the various techniques used in the petroleum industry to protect metallic materials, to detect and to monitor corrosion, in a manner readily accessible to non-specialist readers. --
Download or read book Materials Degradation And Its Control By Surface Engineering 2nd Edition written by Andrew William Batchelor and published by World Scientific. This book was released on 2003-03-12 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Materials Degradation and Its Control by Surface Engineering continues the theme of the first edition, where discussions on corrosion, wear, fatigue and thermal damage are balanced by similarly detailed discussions on their control methods, e.g. painting and metallic coatings. The book is written for the non-specialist, with an emphasis on introducing technical concepts graphically rather than through algebraic equations. In the second edition, the graphic content is enhanced by an additional series of colour and monochrome photographs that illustrate key aspects of the controlling physical phenomena. Existing topics such as liquid metal corrosion have been extended and new topics such as corrosion inhibitors added.
Download or read book Materials Degradation and Its Control by Surface Engineering written by Andrew W. Batchelor and published by World Scientific. This book was released on 2011 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general holistic view of materials degradation without undue emphasis on aqueous corrosion with the neglect of other important topics such as liquid metal corrosion. Discussion of materials degradation is balanced by detailed description and evaluation of surface engineering as a means of managing materials degradation. Thus, the trainee engineer is presented with a comprehensive view of the problem rather than just a part of the problem. The control or management of materials degradation is not only discussed in scientific terms, but the economics or financial aspects of materials degradation and surface engineering is also discussed in detail with the help of analytical models.
Download or read book Corrosion and Degradation of Metallic Materials Understanding of the Phenomena and Applications in Petroleum and Process Industries written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation of Metals in the Atmosphere written by S. W. Dean and published by ASTM International. This book was released on 1987 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation of wood by products of metal corrosion written by A. J. Baker and published by . This book was released on 1974 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Metals and Hydrogen Related Phenomena written by J. Flis and published by Elsevier. This book was released on 2016-01-11 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that about 40% of the annual production of metals is used to repair or replace materials damaged by corrosion. Corrosion causes waste of the natural material and energy resources, it creates serious materials problems for many technologies and adversely affects almost every area of engineering. The use of metals in various aggressive environments has resulted in an extremely wide diversity of corrosion problems. This book presents a collection of concise reviews written by experts in the field on selected topics of metallic corrosion and on some aspects of interaction of hydrogen with metals. A comprehensive range of problems is examined including localized corrosion, high temperature corrosion in liquid metals and molten salts, transport control in corrosion processes, entry of hydrogen into metals, hydrogen embrittlement, and hydrogen reactions with metals. The variety of topics covered in the book will provide corrosion scientists, engineers, university lecturers and students alike with an interdisciplinary approach to solving problems of materials degradation and surface processes in metal corrosion.
Download or read book Steel Corrosion and Degradation of its Mechanical Properties written by Chun-Qing Li and published by CRC Press. This book was released on 2021-09-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art-knowledge on corrosion of steel, cast iron and ductile iron with a focus on corrosion-induced degradation of their mechanical properties. The information presented in the book is largely derived from the most current research on the effect of corrosion on degradation of mechanical properties. The book covers the basics of steel corrosion, including that of cast iron and ductile iron, that are not well covered in most literature. Models for corrosion-induced degradation of mechanical properties are presented in the book with a view to wider applications. The knowledge presented in the book can be used to prevent corrosion-induced failures of corrosion-affected structures, offering enormous benefits to the industry, business, society and community. Key strengths of the book are that it can be employed by a variety of users for different purposes in designing and assessing corrosion-affected structures, and that the knowledge and techniques presented in the book can be easily applied by users in dealing with corrosion-affected structures, and the uniqueness in examining the corrosion effect on degradation of various mechanical properties. Wtih examples of practical applications, the book is particularly useful for all stakeholders involved in steel manufacturing and construction, including engineering students, academicians, researchers, practitioners and asset managers.
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2012-09-24 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications. The Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment. The Handbook's broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete,wood and textiles For each type of material, the book describes the kind of degradation that effects it and how best to protect it Case Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects
Download or read book Materials Corrosion and Protection written by Yongchang Huang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-02-05 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces corrosion mechanisms and protection technologies for metallic and non-metallic materials. A focus lies on the protection of high-tech materials with applications in space and environments exposed to unclear radiation and biological hazards. The determination, measurement and control of different corrosion mechanisms are discussed in detail. Combining theories with case studies, it is an essential reference for material scientists and engineers.
Download or read book Corrosion and Protection of Metals written by David M Bastidas and published by . This book was released on 2020-09-16 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and Scope-During the last few decades, an enormous effort has been made to understand corrosion phenomena and their mechanisms, and to elucidate the causes that dramatically influence the service lifetime of metal materials. The performance of metal materials in aggressive environments is critical for a sustainable society. The failure of the material in service impacts the economy, the environment, health, and society. In this regard, corrosion-based economic losses due to maintenance, repair, and the replacement of existing structures and infrastructure account for up to 4% of gross domestic product (GDP) in well developed countries. One of the biggest issues in corrosion engineering is estimating service lifetime. Corrosion prediction has become very difficult, as there is no direct correlation with service lifetime and experimental lab results, usually as a result of discrepancies between accelerated testing and real corrosion processes. It is of major interest to forecast the impact of corrosion-based losses on society and the global economy, since existing structures and infrastructure are becoming old, and crucial decisions now need to be made to replace them. On the other hand, environmental protocols seek to reduce greenhouse effects. Therefore, low emission policies, in force, establish regulations for the next generation of materials and technologies. Advanced technologies and emergent materials will enable us to get through the next century. Great advances are currently in progress for the development of corrosion-resistant metal materials for different sectors, such as energy, transport, construction, and health. This Special Issue on the corrosion and protection of metals is focused on current trends in corrosion science, engineering, and technology, ranging from fundamental to applied research, thus covering subjects related to corrosion mechanisms and modelling, protection and inhibition processes, and mitigation strategies.
Download or read book Environmental Degradation of Advanced and Traditional Engineering Materials written by Lloyd H. Hihara and published by CRC Press. This book was released on 2013-10-23 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main, ongoing challenges for any engineering enterprise is that systems are built of materials subject to environmental degradation. Whether working with an airframe, integrated circuit, bridge, prosthetic device, or implantable drug-delivery system, understanding the chemical stability of materials remains a key element in determining their useful life. Environmental Degradation of Advanced and Traditional Engineering Materials is a monumental work for the field, providing comprehensive coverage of the environmental impacts on the full breadth of materials used for engineering infrastructure, buildings, machines, and components. The book discusses fundamental degradation processes and presents examples of degradation under various environmental conditions. Each chapter presents the basic properties of the class of material, followed by detailed characteristics of degradation, guidelines on how to protect against corrosion, and a description of testing procedures. A complete, self-contained industrial reference guide, this valuable resource is designed for students and professionals interested in the development of deterioration-resistant technological systems constructed with metallurgical, polymeric, ceramic, and natural materials.
Download or read book Characterization of Corrosion Products on Steel Surfaces written by Yoshio Waseda and published by Springer Science & Business Media. This book was released on 2006-10-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental aspects of materials characterization for the ferric oxyhydroxides formed on steel surfaces. Selected examples, from both the basic science and the applied engineering points of view, are presented. Of special interest is the new structural information on ferric oxyhydroxides containing a small amount of alloying elements. The text relates this to their various states and their role in corrosion processes.
Download or read book Degradation of Metals in the Atmosphere written by ASTM Committee G-1 on Corrosion of Metals and published by . This book was released on 1987 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Deterioration of Materials written by A. Moncmanová and published by WIT Press. This book was released on 2007 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing level of pollution in the environment not only harms the natural world, but also accelerates the deterioration and corrosion of materials used in technical work, as well as objects with historical or artistic value. It is impossible to eliminate the numerous sources of this negative effect, so there are currently increased efforts towards improved preservation, which require a thorough knowledge of the causes of the degradation of individual materials.This book deals with the fundamental principles underlying environmental degradation of widely-used and economically important construction materials such as metals, stone, brick, concrete, timber, cast iron, steel, copper alloys and aluminium. It features information on the methods of deterioration, as well as general information on the economic impact of the damaging processes, and offers some suggested fundamental protection techniques for buildings, industrial and agricultural facilities, monuments and culturally important structures.This book will be of interest to materials and corrosion engineering experts, civil and environmental engineers, students and practicing professionals, designers, architects and restoration engineers. It will also be a useful tool for managers from various sectors of industry, for auditors of environmental management systems, and it can be used as a complementary course book for university students.
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2012-12-31 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications. The Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment. The Handbook’s broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete,wood and textiles For each type of material, the book describes the kind of degradation that effects it and how best to protect it Case Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects
