Download or read book Convective Heat Transfer Predictions and Experiments in an IC Engine written by Jialin Yang and published by . This book was released on 1988 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Mechanics 95 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 3181 pages. Available in PDF, EPUB and Kindle. Book excerpt: AI!, in the earlier conferences (Tokyo, 1986; Atlanta, 1988, Melbourne, 1991; and Hong Kong, 1992) the response to the call for presentations at ICES-95 in Hawaii has been overwhelming. A very careful screening of the extended abstracts resulted in about 500 paper being accepted for presentation. Out of these, written versions of about 480 papers reached the conference secretariat in Atlanta in time for inclusion in these proceedings. The topics covered at ICES-95 range over the broadest spectrum of computational engineering science. The editors thank the international scientific committee, for their advice and encouragement in making ICES-95 a successful scientific event. Special thanks are expressed to the International Association for Boundary Elements Methods for hosting IABEM-95 in conjunction with ICES-95. The editors here express their deepest gratitude to Ms. Stacy Morgan for her careful handling of a myriad of details of ICES-95, often times under severe time constraints. The editors hope that the readers of this proceedings will find a kaleidoscopic view of computational engineering in the year 1995, as practiced in various parts of the world. Satya N. Atluri Atlanta, Georgia, USA Genki Yagawa Tokyo,Japan Thomas A. Cruse Nashville, TN, USA Organizing Committee Professor Genki Yagawa, University of Tokyo, Japan, Chair Professor Satya Atluri, Georgia Institute of Technology, U.S.A.
Download or read book Transport Phenomena In Combustion written by SH Chan and published by Taylor & Francis. This book was released on 2024-09-06 with total page 1862 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set presents the proceedings from the 8th International Symposium on Transport Phenomena in Combustion. There are more than 150 chapters that provide an extensive review of topics such as complete numerical simulation of combustion and heat transfer in furnaces and boilers, the interaction of combustion and heat transfer in porous media for low emission, high efficiency applications, industrial combustion technology, experimental and diagnostic methods and active combustion control, and fire research, internal combustion engine, Nox and soot emission.
Download or read book Heat Transfer Predictions and Experiments in a Motored Engine written by Jialin Yang and published by . This book was released on 1988 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experiments and Computational Predictions of Thermal Energy Flows Occurring Within a Spark Ignited Homogeneous Charge Four Stroke Air cooled Engine written by Jay Elliott Strucel and published by . This book was released on 2000 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Heat Transfer Fluid Mechanics and Thermodynamics 1993 written by M.D. Kelleher and published by Elsevier. This book was released on 2012-12-02 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained in this volume reflect the ingenuity and originality of experimental work in the areas of fluid mechanics, heat transfer and thermodynamics. The contributors are drawn from 27 countries which indicates how well the worldwide scientific community is networked. The papers cover a broad spectrum from the experimental investigation of complex fundamental physical phenomena to the study of practical devices and applications. A uniform outline and method of presentation has been used for each paper.
Download or read book Simulation and Optimization of Internal Combustion Engines written by Zhiyu Han and published by SAE International. This book was released on 2021-12-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and Optimization of Internal Combustion Engines provides the fundamentals and up-to-date progress in multidimensional simulation and optimization of internal combustion engines. While it is impossible to include all the models in a single book, this book intends to introduce the pioneer and/or the often-used models and the physics behind them providing readers with ready-to-use knowledge. Key issues, useful modeling methodology and techniques, as well as instructive results, are discussed through examples. Readers will understand the fundamentals of these examples and be inspired to explore new ideas and means for better solutions in their studies and work. Topics include combustion basis of IC engines, mathematical descriptions of reactive flow with sprays, engine in-cylinder turbulence, fuel sprays, combustions and pollutant emissions, optimization of direct-injection gasoline engines, and optimization of diesel and alternative fuel engines.
Download or read book Multidimensional Modeling of Convective Heat Transfer with Application to IC Engines written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this project is to develop a more comprehensive understanding of the convective heat transfer process in complex, unsteady turbulent reacting flows, typical of those which occur in internal combustion engines. The specific area of research is the representation of heat transfer in detailed multi-dimensional Navier-Stokes models, and modeling of turbulent transport mechanisms. The detailed tasks include a review of relevant prior work. Based on this review, and original work done under this contract, several modeling approaches are being formulated and will be further studied and tested. The tests will be carried out on flow cases which have relevance to engine flows, and for which reliable experimental data exist. This report discusses the results of current work and describes experiments to be performed.
Download or read book The Effects of Pressure Gradients on Convective Heat Flux Predictions in Engine Environments written by Yiping Zhang and published by . This book was released on 1991 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Rocket Engines written by H. Ziebland and published by . This book was released on 1971 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first part of this book the various basic heat transfer processes are considered, -- simple convective heat transfer from hot gases to the engine walls under various conditions, radiation heat transfer, and coolant heat transfer processes. This part is followed by one describing the various methods of cooling used in liquid propellant rocket engines, such as regenerative, film, ablation and radiation cooling. The final part concerns the properties of materials that will have to be known by the engine designer, from the transport properties of the hot combustion gases to those of the materials from which the engine will be constructed. Emphasis was placed on presenting simple methods for calculating the magnitude of heat transfer rather than providing the most modern and rigorous theories, particularly in the field of developing boundary layers. (Author).
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1989 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study of Convective Heat Transfer Phenomena for Turbulent Pulsating Flows in Pipes written by Marco Simonetti and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Energy Recovery represents a promising way to go further in fuel saving and greenhouse emissions control for Internal Combustion Engine applications. Although several technologies have been investigated in the past few years, the convective heat transfers, playing an important role in the energy exchanges at the engine exhaust, has not receive enough attention. Heat transfers, in such applications, occur in pulsating conditions because of the engine operating conditions, making thus the actual knowledge of the heat transfer phenomena limited and not exploitable. Nowadays there is not any model capable to predict convective heat transfers for pulsating flows. In this context, the present thesis addresses the purpose to study the convective heat transfer phenomena, by an experimental approach, occurring for turbulent pulsating flows in pipes. In the first part of this work, an experimental apparatus has been designed to reproduce an exhaust type pulsating flow in fully managed conditions, as well as, several measurement techniques have been developed to know the instantaneous profiles of air temperature and velocity. Many experiments have been performed in order to characterize the impact of the flow pulsation on the convective heat transfers. In the second part of this work, the experimental results have been analyzed with two different approaches: firstly, with a 1D assumption the time-average convective heat transfers has been computed, and the major mechanism responsible of the heat transfer enhancement has been pointed out. Furthermore, it has been possible to highlight the mathematical term representative of such mechanism, which should be accounted in future to define a more adapted numerical model for the heat transfer prediction. In a second phase with a 2D assumption, and, with an energy and a fluid-mechanic computational phase, the radial transport of thermal energy has been characterized for a pulsating flow.
Download or read book Vehicle Thermal Management written by Gursaran D Mathur and published by SAE International. This book was released on 2004-04-08 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency of thermal systems (HVAC, engine cooling, transmission, and power steering) has improved greatly over the past few years. Operating these systems typically requires a significant amount of energy, however, which could adversely affect vehicle performance. To provide customers the level of comfort that they demand in an energy-efficient manner, innovative approaches must be developed. Vehicle Thermal Management: Heat Exchangers & Climate Control is an essential resource for engineers and designers working on thermal systems, presenting the most recent and relevant technical papers that focus on this important vehicle component. Chapters include: Heating and Air Conditioning Engine Cooling Underhood Thermal Environment Heat Transfer in Engines Heat Exchangers New Technologies
Download or read book Computational Mechanics 95 written by Satya N. Atluri and published by Springer Science & Business Media. This book was released on 1995 with total page 1638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsteady Convective Heat Transfer Modeling and Application to Internal Combustion Engines written by Pin Zeng and published by . This book was released on 2004 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Predictions and Experiments in a Motored Engine by Jialin Yang Philip Pierce Jay K Martin and David E Foster written by Jialin Yang and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
