Download or read book Convective Heat Transfer and Flow Friction Characteristics of Compact Heat Exchanger Surface written by Rodney E. Maxim and published by . This book was released on 1962 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Convective Heat Transfer and Flow Friction Characteristics of Compact Heat Exchanger Surfaces written by Rodney E. Maxim and published by . This book was released on 1962 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experimental results for convective heat transfer and flow friction characteristics of some screen, plate-fin and skewed fin matrices of various geometry are presented. The heat transfer data were obtained using the transient technique. The results, which are presented in graphic and tabular form, should be of practical use for compact heat exchanger design. The tabular results of a digital computer solution giving the maximum slope of the generalized heating curve as a unique function of NTU are appended.

Download or read book Heat Transfer and Flow Friction Characteristics of Several Plate fin Type Compact Heat Exchanger Surfaces written by Paul F. Pucci and published by . This book was released on 1967 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental results for the convective heat transfer and flow friction characteristics of plate-fin type heat transfer surfaces are presented for five surfaces. Four surfaces had a sinusoidal fin geometry. Two of these were fabricated of stainless steel, two of nickel. One of the nickel surfaces had perforated nickel fins. The fifth surface was fabricated of stainless steel and had a triangular fin geometry. The heat transfer data were obtained by the single-blow transient testing technique and by the cyclic testing technique. The two techniques compliment each other in extending the range of testing capability.

Download or read book Heat Transfer and Flow Friction Characteristics of Several Plate fin Type Compact Heat Exchanger Surfaces written by and published by . This book was released on 1967 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental results for the convective heat transfer and flow friction characteristics of plate-fin type heat transfer surfaces are presented for five surfaces. Four surfaces had a sinusoidal fin geometry. Two of these were fabricated of stainless steel, two of nickel. One of the nickel surfaces had perforated nickel fins. The fifth surface was fabricated of stainless steel and had a triangular fin geometry. The heat transfer data were obtained by the single-blow transient testing technique and by the cyclic testing technique. The two techniques compliment each other in extending the range of testing capability. (Author).

Download or read book The Heat Transfer and Flow Friction Performance of Three Compact Plate fin Heat Exchanger Surfaces written by William Morrow Kays and published by . This book was released on 1949 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer and Flow Friction Characteristics of Skewed Passage and Glass Ceramic Heat Transfer Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1963 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental results for convective heat transfer and flow friction characteristics of three skewed passage and four glass-ceramic compact heat exchanger surfaces are presented which should be of practical use, particularly in the design of gas turbine regenerators. The heat transfer data were obtained by the transient technique. (Author).

Download or read book Compact Heat Exchangers written by William Morrow Kays and published by . This book was released on 1998 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text compiles experimental data on the basic heat transfer and flow friction characteristics of compact heat exchangers. The data can be applied to space heating, spacecraft heat exchangers, aircraft heat exchangers and various cooling systems.

Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.

Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2012-03-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air conditioning and refrigeration systems. Revised and updated with new problem sets and examples, Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition presents a

Download or read book Turbulent Heat Transfer and Flow Friction Characteristics of Plain Plate Fin Heat Exchanger Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1959 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer and Flow Friction Performance of Three Compact Plate fin Heat Exchange Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1949 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2020-01-21 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air-conditioning, and refrigeration systems. Revised and fully updated with new problem sets, Heat Exchangers: Selection, Rating, and Thermal Design, Fourth Edition presents a systematic treatment of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include Classification of heat exchangers Basic design methods of heat exchangers for sizing and rating problems Single-phase forced convection correlations for heat exchangers Pressure drop and pumping power for heat exchangers and piping circuits Design methods of heat exchangers subject to fouling Thermal design methods and processes for double-pipe, shell-and-tube, gasketed-plate, compact, and polymer heat exchangers Two-phase convection correlations for heat exchangers Thermal design of condensers and evaporators Micro/nanoheat transfer The Fourth Edition contains updated information about microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design and experiment with nanofluids. The Fourth Edition is designed for courses/modules in process heat transfer, thermal systems design, and heat exchanger technology. This text includes full coverage of all widely used heat exchanger types.

Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-02-09 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.

Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.

Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.

Download or read book Experimental Determination of Heat Transfer and Flow Friction Characteristics for Several Plate Fin Type Compact Heat Exchanger Surfaces written by Stuart Franklin Ball and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compact Heat Exchangers written by William Morrow Kays and published by . This book was released on 1958 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: