Download or read book Convection in Ferro Nanofluids Experiments and Theory written by Aleksandra A. Bozhko and published by Springer. This book was released on 2018-08-25 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the experimental and theoretical study of convection in non-isothermal ferro-nanofluids (FNFs). Since FNFs are not transparent and magnetic fields are very sensitive to the shape of the boundary between magnetic and nonmagnetic media, special flow visualization techniques based on the use of thermo-sensitive liquid crystal films, infrared cameras, as well as local and integral temperature sensors are discussed in the book. This book considers several major configurations of convective chambers and the applied magnetic field. For each of them, the stability boundaries are determined theoretically and experimentally. The physical types of dominant instabilities and the characteristics of their interactions are subsequently established using linear and weakly non-linear hydrodynamic stability analyses and elements of bifurcation theory. The book also discusses the potential of using magnetically controlled ferro-nanofluids as a heat carrier in situations where heat removal by natural convection is not possible due to the lack of gravity (orbital stations) or extreme confinement (microelectronics). Researchers and practitioners working in the areas of fluid mechanics, hydrodynamic stability, and heat and mass transfer will benefit from this book.
Download or read book Heat Energy Recovery for Industrial Processes and Wastes written by David Borge-Diez and published by Springer Nature. This book was released on 2023-02-13 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides new techniques for recovering exhaust heat from gas turbines, natural gas combined cycle power plants, biomass boilers, and waste heat recovery from compost and wastewater treatment plants The book provides modeling for the study and comparison of combined cycle power plants with a heat recovery boiler of three pressure levels with reheating, inserting a technological improvement of solar hybridization and partial regeneration in the gas turbine. It assesses the environmental impacts and economic sustainability associated with these improvements. In addition, it proposes emissions minimization, with exhaust gas recirculation (EGR), and emissions treatment with a CO2 capture plant (CCP) and combined cycle power plant. Finally, it provides new insights into heat recovery from compost and exhaust gases recovery from wastewater treatment plants.
Download or read book Heat Transfer Due to Laminar Natural Convection of Nanofluids written by De-Yi Shang and published by Springer. This book was released on 2018-07-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical study of heat transfer due to laminar natural convection of nanofluids, using Al2O3-water nanofluid as an example. An innovative method of similarity transformation of velocity fields on laminar boundary layers is applied for the development of a mathematical governing model of natural convection with actual nanofluids, and a novel model of the nanofluid's variable thermophysical properties is derived by a mathematical analysis based on the developed model of variable physical properties of fluids combined with the model of the nanofluid's thermal conductivity and viscosity. Based on these, the physical property factors of nanofluids are produced, which leads to a simultaneous solution for deep investigations of hydrodynamics and heat transfer of nanofluid's natural convection. The book also proposes novel predictive formulae for the evaluation of heat transfer of Al2O3-water nanofluid’s natural convection. The formulae have reliable theoretical and practical value because they are developed by rigorous theoretical analysis of heat transfer combined with full consideration of the effects of the temperature-dependent physical properties of nanofluids and the nanoparticle shape factor and concentration, as well as variations of fluid boundary temperatures. The conversion factors proposed help to turn the heat transfer coefficient and rate of fluid natural convection into those of nanofluid natural convection. Furthermore, several calculation examples are provided to demonstrate the heat transfer application of the proposed predictive formulae.
Download or read book Nanofluid Technologies and Thermal Convection Techniques written by Chand, Ramesh and published by IGI Global. This book was released on 2017-01-10 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging developments in nanofluid research have enhanced its range of various industrial applications. When implemented effectively, the use of such fluids offer numerous benefits, particularly in cooling processes. Nanofluid Technologies and Thermal Convection Techniques is a pivotal source of information for theoretical perspectives and investigations on the thermal instability of nanofluids and its various effects. Highlighting relevant studies relating to stationary, double diffusive, and oscillatory convection, this book is ideally designed for professionals, researchers, and practitioners seeking material on the industrial usage of nanofluid technologies.
Download or read book Nanofluid Heat and Mass Transfer in Engineering Problems written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2017-03-15 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, nanofluid heat and mass transfer in engineering problems are investigated. The use of additives in the base fluid like water or ethylene glycol is one of the techniques applied to augment heat transfer. Newly, innovative nanometer-sized particles have been dispersed in the base fluid in heat transfer fluids. The fluids containing the solid nanometer-sized particle dispersion are called "nanofluids." At first, nanofluid heat and mass transfer over a stretching sheet are provided with various boundary conditions. Problems faced for simulating nanofluids are reported. Also, thermophysical properties of various nanofluids are presented. Nanofluid flow and heat transfer in the presence of magnetic field are investigated. Furthermore, applications for electrical and biomedical engineering are provided. Besides, applications of nanofluid in internal combustion engine are provided.
Download or read book Modelling of Convective Heat and Mass Transfer in Nanofluids with and without Boiling and Condensation written by Andriy A. Avramenko and published by Springer Nature. This book was released on 2022-02-12 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents step-by-step description of the use of Lie group analysis to find symmetry forms and similarity solutions for single- and two-phase laminar and turbulent flows of nanofluids. It outlines novel and unique analytical solutions validated via comparisons with experimental data. The main part of the book is devoted to analytical modeling of film condensation of still and moving vapor with nanoparticles, stable film boiling of nanofluids, instantaneous unsteady boiling and condensation of nano- and ordinary fluids and clarification and quantification of instability conditions in the vapor layer, as well as centrifugal and Dean instability in nanofluids. It was demonstrated that such complex phenomena can be successfully simulated using the proposed approaches validated via reliable experiments. The book is intended for scientists, engineers, graduate and undergraduate students specializing in the area of engineering thermodynamics, heat and mass transfer and energy systems.
Download or read book Nanofluidics written by Efstathios E. (Stathis) Michaelides and published by Springer. This book was released on 2014-05-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive examination of the subject of heat and mass transfer with nanofluids as well as a critical review of the past and recent research projects in this area. Emphasis is placed on the fundamentals of the transport processes using particle-fluid suspensions, such as nanofluids. The nanofluid research is examined and presented in a holistic way using a great deal of our experience with the subjects of continuum mechanics, statistical thermodynamics, and non-equilibrium thermodynamics of transport processes. Using a thorough database, the experimental, analytical, and numerical advances of recent research in nanofluids are critically examined and connected to past research with medium and fine particles as well as to functional engineering systems. Promising applications and technological issues of heat/mass transfer system design with nanofluids are also discussed. This book also: Provides a deep scientific analysis of nanofluids using classical thermodynamics and statistical thermodynamics to explain and interpret experimental observations Presents the theory and experimental results for both thermodynamic and transport properties Examines all transport properties and transport processes as well as their relationships through the pertinent macroscopic coefficients Combines recent knowledge pertaining to nanofluids with the previous fifty years of research on particulate flows, including research on transient flow and heat transfer of particulate suspensions Conducts an holistic examination of the material from more than 500 archival publications
Download or read book Nanoparticle Heat Transfer and Fluid Flow written by W. J. Minkowycz and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions by leading researchers in the field, Nanoparticle Heat Transfer and Fluid Flow explores heat transfer and fluid flow processes in nanomaterials and nanofluids, which are becoming increasingly important across the engineering disciplines. The book covers a wide range, from biomedical and energy conversion applications to mate
Download or read book Heat Transfer Enhancement with Nanofluids written by Vincenzo Bianco and published by CRC Press. This book was released on 2015-04-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from
Download or read book Thermal Characteristics and Convection in Nanofluids written by Aditya Kumar and published by Springer Nature. This book was released on 2021-01-04 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers synthesis, characterization, stability, heat transfer and applications of nanofluids. It includes different types of nanofluids, their preparation methods as well as its effects on the stability and thermophysical properties of nanofluids. It provides a discussion on the mechanism behind the change in the thermal properties of nanofluids and heat transfer behaviour. It presents the latest information and discussion on the preparation and advanced characterization of nanofluids. It also consists of stability analysis of nanofluids and discussion on why it is essential for the industrial application. The book provides a discussion on thermal boundary layer properties in convection. Future directions for heat transfer applications to make the production and application of nanofluids at industrial level are also discussed.
Download or read book Micro and Nanofluid Convection with Magnetic Field Effects for Heat and Mass Transfer Applications using MATLAB written by Chakravarthula S K Raju and published by Elsevier. This book was released on 2022-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and Nanofluid Convection with Magnetic Field Effects for Heat and Mass Transfer Applications using MATLAB® examines the performance of micro and nanofluids with various physical effects such as magnetic field, slip effects, radiation and heat sources. Heat and mass transfer enhancement techniques are widely used in many applications in the heating and cooling or freezing process to make possible a reduction in weight and size or enhance performance during heat and mass exchanges. The book covers the two categories of flow techniques, active and passive. It discusses various considerations in the engineering sciences in the melting process, polymer industry and in metallurgy. To be more precise, it may be pointed out that many metal surgical developments involve the cooling of continuous strips or filaments by drawing them through a quiescent fluid, and in that process of drawing, these strips are sometimes stretched. In all these cases, the properties of the final product depend, to a great extent, on the rate of cooling by drawing such strips in an electrically conducting fluid subject to a magnetic field and thermal radiation. - Provides information about the governing equations for all three types of flow geometries - Explains micro polar fluid flow modeling - Offers detailed coverage of boundary value problems using MATLAB®
Download or read book Thermal Performance of Nanofluids in Miniature Heat Sinks with Conduits written by S. Harikrishnan and published by Springer Nature. This book was released on 2022-01-04 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book focuses on the basic physical features and purpose of nanofluids and miniature heat sinks. The contents demonstrate the design modification, fabrication, experimental investigation, and various applications of miniature heat sinks. The book provides context for thermal performance of miniature heat sinks as well as summaries of experimental results correlations that reflect the current technical innovations are included. This book is a useful reference for both academia and industry alike.
Download or read book Nanofluids and Mass Transfer written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2021-09-04 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent decades, efficiency enhancement of refineries and chemical plants has been become a focus of research and development groups. Use of nanofluids in absorption, regeneration, liquid-liquid extraction and membrane processes can lead to mass transfer and heat transfer enhancement in processes which results in an increased efficiency in all these processes. Nanofluids and Mass Transfer introduces the role of nanofluids in improving mass transfer phenomena and expressing their characteristics and properties. The book also covers the theory and modelling procedures in details and finally illustrates various applications of Nanofluids in mass transfer enhancement in various processes such as absorption, regeneration, liquid-liquid extraction and membrane processes and how can nanofluids increase mass transfer in processes. - Introduces specifications of nanofluids and mechanisms of mass transfer enhancement by nanofluids in various mass transfer processes - Discusses mass transfer enhancement in various mass transfer processes such as: absorption, regeneration, liquid-liquid extraction and membrane processes - Offers modelling mass transfer and flow in nanofluids - Challenges industrialization and scale up of nanofluids
Download or read book Applications of Nanofluid Transportation and Heat Transfer Simulation written by Sheikholeslami, Mohsen and published by IGI Global. This book was released on 2018-12-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different numerical and analytical methods have been employed to find the solution of governing equations for nanofluid flow and heat transfer. Applications of Nanofluid Transportation and Heat Transfer Simulation provides emerging research exploring the theoretical and practical aspects and applications of heat and nanofluid transfer. With practical examples and proposed methodology, it features coverage on a broad range of topics such as nanoparticles, electric fields, and hydrothermal behavior, making it an ideal reference source for engineers, researchers, graduate students, professionals, and academics.
Download or read book Hybrid Nanofluids for Convection Heat Transfer written by Hafiz Muhammad Ali and published by Academic Press. This book was released on 2020-05-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids for Convection Heat Transfer discusses how to maximize heat transfer rates with the addition of nanoparticles into conventional heat transfer fluids. The book addresses definitions, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors, and core applications with implementation challenges of hybrid nanofluids. The work adopts mathematical models and schematic diagrams in review of available experimental methods. It enables readers to create new techniques, resolve existing research problems, and ultimately to implement hybrid nanofluids in convection heat transfer applications. - Provides key heat transfer performance and thermophysical characteristics of hybrid nanofluids - Reviews parameter selection and property measurement techniques for thermal performance calibration - Explores the use of predictive mathematical techniques for experimental properties
Download or read book Microscale and Nanoscale Heat Transfer written by C.B. Sobhan and published by CRC Press. This book was released on 2008-06-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through analyses, experimental results, and worked-out numerical examples, Microscale and Nanoscale Heat Transfer: Fundamentals and Engineering Applications explores the methods and observations of thermophysical phenomena in size-affected domains. Compiling the most relevant findings from the literature, along with results from their own re
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
