Download or read book Laminar Flow and Convective Transport Processes written by Howard Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow and Convective Transport Processes: Scaling Principles and Asymptotic Analysis presents analytic methods for the solution of fluid mechanics and convective transport processes, all in the laminar flow regime. This book brings together the results of almost 30 years of research on the use of nondimensionalization, scaling principles, and asymptotic analysis into a comprehensive form suitable for presentation in a core graduate-level course on fluid mechanics and the convective transport of heat. A considerable amount of material on viscous-dominated flows is covered. A unique feature of this book is its emphasis on scaling principles and the use of asymptotic methods, both as a means of solution and as a basis for qualitative understanding of the correlations that exist between independent and dependent dimensionless parameters in transport processes. Laminar Flow and Convective Transport Processes is suitable for use as a textbook for graduate courses in fluid mechanics and transport phenomena and also as a reference for researchers in the field.
Download or read book Convection Heat Transfer and Transport Processes written by American Society of Mechanical Engineers. Winter Annual Meeting and published by American Society of Civil Engineers. This book was released on 1989 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.
Download or read book Heat Transfer and Fluid Flow in Biological Processes written by Sid M. Becker and published by Academic Press. This book was released on 2014-12-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer and Fluid Flow in Biological Processes covers emerging areas in fluid flow and heat transfer relevant to biosystems and medical technology. This book uses an interdisciplinary approach to provide a comprehensive prospective on biofluid mechanics and heat transfer advances and includes reviews of the most recent methods in modeling of flows in biological media, such as CFD. Written by internationally recognized researchers in the field, each chapter provides a strong introductory section that is useful to both readers currently in the field and readers interested in learning more about these areas. Heat Transfer and Fluid Flow in Biological Processes is an indispensable reference for professors, graduate students, professionals, and clinical researchers in the fields of biology, biomedical engineering, chemistry and medicine working on applications of fluid flow, heat transfer, and transport phenomena in biomedical technology. - Provides a wide range of biological and clinical applications of fluid flow and heat transfer in biomedical technology - Covers topics such as electrokinetic transport, electroporation of cells and tissue dialysis, inert solute transport (insulin), thermal ablation of cancerous tissue, respiratory therapies, and associated medical technologies - Reviews the most recent advances in modeling techniques
Download or read book Fundamentals of Biomedical Transport Processes written by Gerald Miller and published by Springer Nature. This book was released on 2022-06-01 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport processes represent important life-sustaining elements in all humans. These include mass transfer processes, including gas exchange in the lungs, transport across capillaries and alveoli, transport across the kidneys, and transport across cell membranes. These mass transfer processes affect how oxygen and carbon dioxide are exchanged in your bloodstream, how metabolic waste products are removed from your blood, how nutrients are transported to tissues, and how all cells function throughout the body. A discussion of kidney dialysis and gas exchange mechanisms is included. Another element in biomedical transport processes is that of momentum transport and fluid flow. This describes how blood is propelled from the heart and throughout the cardiovascular system, how blood elements affect the body, including gas exchange, infection control, clotting of blood, and blood flow resistance, which affects cardiac work. A discussion of the measurement of the blood resistance to flow (viscosity), blood flow, and pressure is also included. A third element in transport processes in the human body is that of heat transfer, including heat transfer inside the body towards the periphery as well as heat transfer from the body to the environment. A discussion of temperature measurements and body protection in extreme heat conditions is also included. Table of Contents: Biomedical Mass Transport / Biofluid Mechanics and Momentum Transport / Biomedical Heat Transport
Download or read book Transport Phenomena written by Estéban Saatdjian and published by John Wiley & Sons. This book was released on 2000-11-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable text, provides a much-needed overview of both the theoretical development, as well as appropriate numerical solutions, for all aspects of transport phenomena. It contains a basic introduction to many aspects of fluid mechanics, heat transfer and mass transfer, and the conservation equations for mass, energy and momentum are discussed with reference to engineering applications. Heat transfer by conduction, radiation, natural and forced convection is studied, as well as mass transfer and incompressible fluid mechanics. The second part of the book deals with numerical methods used to solve the problems encountered earlier. The basic concepts of finite difference and finite volume methods are presented. Other subjects usually covered in mathematical textbooks such as vector and tensor analysis, Laplace transforms, and Runge-Kutta methods are discussed in the Appendices. * Offers comprehensive coverage of both transport phenomena and numerical and analytical solutions to the problems. * Includes comprehensive coverage of numerical techniques. * Provides real-life problems and solutions, which are vital to the understanding and implementation of applications. This work will be welcomed not only by senior and graduate students in mechanical, aeronautical and chemical engineering, but also for engineers practising in these fields.
Download or read book Convective Heat and Mass Transfer written by S. Mostafa Ghiaasiaan and published by CRC Press. This book was released on 2018-06-12 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convective Heat and Mass Transfer, Second Edition, is ideal for the graduate level study of convection heat and mass transfer, with coverage of well-established theory and practice as well as trending topics, such as nanoscale heat transfer and CFD. It is appropriate for both Mechanical and Chemical Engineering courses/modules.
Download or read book Transport Phenomena and Unit Operations written by Richard G. Griskey and published by John Wiley & Sons. This book was released on 2005-01-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of transport phenomena has long been thoroughly and expertly addressed on the graduate and theoretical levels. Now Transport Phenomena and Unit Operations: A Combined Approach endeavors not only to introduce the fundamentals of the discipline to a broader, undergraduate-level audience but also to apply itself to the concerns of practicing engineers as they design, analyze, and construct industrial equipment. Richard Griskey's innovative text combines the often separated but intimately related disciplines of transport phenomena and unit operations into one cohesive treatment. While the latter was an academic precursor to the former, undergraduate students are often exposed to one at the expense of the other. Transport Phenomena and Unit Operations bridges the gap between theory and practice, with a focus on advancing the concept of the engineer as practitioner. Chapters in this comprehensive volume include: Transport Processes and Coefficients Frictional Flow in Conduits Free and Forced Convective Heat Transfer Heat Exchangers Mass Transfer; Molecular Diffusion Equilibrium Staged Operations Mechanical Separations Each chapter contains a set of comprehensive problem sets with real-world quantitative data, affording students the opportunity to test their knowledge in practical situations. Transport Phenomena and Unit Operations is an ideal text for undergraduate engineering students as well as for engineering professionals.
Download or read book Principles of Convective Heat Transfer written by Massoud Kaviany and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise and unified text reviews recent contributions to the principles of convective heat transfer for single and multi-phase systems. This valuable new edition has been updated throughout and contains new examples and problems.
Download or read book Numerical Simulations of Heat Transfer and Fluid Flow on a Personal Computer written by Susumu Kotake and published by Elsevier Publishing Company. This book was released on 1993 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methodologies for performing numerical simulations of transport processes in heat transfer and fluid flow. The reader is guided to make the proper selection of simulation techniques and to interpret the acquired results based on the flow physics involved. Computer programs which are used to solve heat transfer and fluid flow problems are integrated into the text. Illustrative examples of thermo-fluid phenomena are provided in every chapter to enhance understanding of the subjects by offering the reader hands-on experience of numerical simulations. Most of the fundamental transport processes in heat transfer and fluid flow, e.g. heat conduction in a solid body, convection heat transfer of a fin, laminar and turbulent heat transfer and flow in a duct or tube, and boundary layers over a flat plate are covered. A strong emphasis is placed on examinations of the thermo-fluid phenomena inside a flow passage (such as tube and a channel). The book contains detailed discussions on the formulation of the boundary conditions which is often the key issue in making successful numerical simulations of the physical phenomena of interest. Simulations are carefully designed so that conventional 16-bit personal computers, such as IBM PCreg; or Apple Macintoshreg; can be used. Visualizing the simulated results in graphic form (plotting charts and line contours of physical variables) significantly enhances the reader's understanding of the important transport processes. The book is intended as an introductory text for numerical simulations of heat transfer and fluid flow phenomena. Description is simple and self-contained so that beginners can easily understand the material, yet it will also serve as a useful reference work for the practitioner. Exercise problems are supplied by which the reader can consolidate knowledge of simulation techniques described and gain further insight in the physical processes of interest. The book contains two 3frac12; inch floppy disks, each of which stores a complete set of simulation source codes discussed in the text. These programs are recorded in ASCII format and can be run either on IBM PCreg; or Macintoshreg; using QuickBasicreg;. The programs are well-documented within the text as well as in the codes themselves with a number of comment statements. This helps the reader understand the flow of program runs and, if the reader so wishes, modifying the original source codes. To facilitate prescription of the physical conditions for simulations, these programs run in a highly interactive mode. In addition, the diskettes contain a number of compiled programs which can be executed without the QuickBasicreg; program.
Download or read book Transport Phenomena in Food Processing written by Jorge Welti-Chanes and published by CRC Press. This book was released on 2016-04-19 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically developed for food engineers, this is an in-depth reference book that focuses on transport phenomena in food preservation. First it reviews the fundamental concepts regarding momentum, heat, and mass transfer. Then the book examines specific applications of these concepts into a variety of traditional and novel processes and products.
Download or read book Computational Heat Transfer written by Yogesh Jaluria and published by Routledge. This book was released on 2017-10-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition updated the material by expanding coverage of certain topics, adding new examples and problems, removing outdated material, and adding a computer disk, which will be included with each book. Professor Jaluria and Torrance have structured a text addressing both finite difference and finite element methods, comparing a number of applicable methods.
Download or read book Transport Processes in Chemically Reacting Flow Systems written by Daniel E. Rosner and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Processes in Chemically Reacting Flow Systems discusses the role, in chemically reacting flow systems, of transport processes—particularly the transport of momentum, energy, and (chemical species) mass in fluids (gases and liquids). The principles developed and often illustrated here for combustion systems are important not only for the rational design and development of engineering equipment (e.g., chemical reactors, heat exchangers, mass exchangers) but also for scientific research involving coupled transport processes and chemical reaction in flow systems. The book begins with an introduction to transport processes in chemically reactive systems. Separate chapters cover momentum, energy, and mass transport. These chapters develop, state, and exploit useful quantitative ""analogies"" between these transport phenomena, including interrelationships that remain valid even in the presence of homogeneous or heterogeneous chemical reactions. A separate chapter covers the use of transport theory in the systematization and generalization of experimental data on chemically reacting systems. The principles and methods discussed are then applied to the preliminary design of a heat exchanger for extracting power from the products of combustion in a stationary (fossil-fuel-fired) power plant. The book has been written in such a way as to be accessible to students and practicing scientists whose background has until now been confined to physical chemistry, classical physics, and/or applied mathematics.
Download or read book Transport Phenomena in Capillary Porous Structures and Heat Pipes written by Henry Smirnov and published by CRC Press. This book was released on 2009-07-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-phase nano- and micro-thermal control device research is now proving relevant to a growing range of modern applications, including those in cryogenics, thermal engineering, MEMS, and aerospace engineering. Until now, researchers have lacked a definitive resource that provides a complete review of micro- and nano-scale evaporative heat and mass
Download or read book Convective Heat Transfer written by I. Pop and published by Elsevier. This book was released on 2001-02-23 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad formodelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoreticalanalyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such ascorrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.
Download or read book Heat Transfer in Process Engineering written by Eduardo Cao and published by McGraw Hill Professional. This book was released on 2009-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge heat transfer principles and design applications Apply advanced heat transfer concepts to your chemical, petrochemical, and refining equipment designs using the detailed information contained in this comprehensive volume. Filled with valuable graphs, tables, and charts, Heat Transfer in Process Engineering covers the latest analytical and empirical methods for use with current industry software. Select heat transfer equipment, make better use of design software, calculate heat transfer coefficients, troubleshoot your heat transfer process, and comply with design and construction standards. Heat Transfer in Process Engineering allows you to: Review heat transfer principles with a direct focus on process equipment design Design, rate, and specify shell and tube, plate, and hairpin heat exchangers Design, rate, and specify air coolers with plain or finned tubes Design, rate, and specify different types of condensers with tube or shellside condensation for pure fluids or multicomponent mixtures Understand the principles and correlations of boiling heat transfer, with their limits on and applications to different types of reboiler design Apply correlations for fired heater ratings, for radiant and convective zones, and calculate fuel efficiency Obtain a set of useful Excel worksheets for process heat transfer calculations
Download or read book Convective Heat and Mass Transfer in Porous Media written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of literature on convective heat and mass transfer through porous media has brought both engineering and fundamental knowledge to a new state of completeness and depth. Additionally, several new questions of fundamental merit have arisen in several areas which bear direct relation to further advancement of basic knowledge and applications in this field. For example, the growth of fundamental heat transfer data and correlations for engineering use for saturated media has now reached the point where the relations for heat transfer coefficients and flow parameters are known well enough for design purposes. Multiple flow field regimes in natural convection have been identified in several important enclosure geometries. New questions have arisen on the nature of equations being used in theoretical studies, i. e. , the Validity of Darcy assumption is being brought into question; Wall effects in high and low velocity flow fields have been found to play a role in predicting transport coefficients; The formulation of transport problems in fractured media are being investigated as both an extension of those in a homogeneous medium and for application in engineering systems in geologic media and problems on saturated media are being addressed to determine their proper formulation and solution. The long standing problem of how to adequately formulate and solve problems of multi-phase heat and mass transfer in heterogeneous media is important in the technologies of chemical reactor engineering and enhanced oil recovery.
