Download or read book Understanding and Using the Controller Area Network Communication Protocol written by Marco Di Natale and published by Springer Science & Business Media. This book was released on 2012-01-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book to offers a hands-on guide to designing, analyzing and debugging a communication infrastructure based on the Controller Area Network (CAN) bus. Although the CAN bus standard is well established and currently used in most automotive systems, as well as avionics, medical systems and other devices, its features are not fully understood by most developers, who tend to misuse the network. This results in lost opportunities for better efficiency and performance. These authors offer a comprehensive range of architectural solutions and domains of analysis. It also provides formal models and analytical results, with thorough discussion of their applicability, so that it serves as an invaluable reference for researchers and students, as well as practicing engineers.

Download or read book Controller Area Network written by Konrad Etschberger and published by . This book was released on 2001 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.

Download or read book A Comprehensible Guide to Controller Area Network written by Wilfried Voss and published by Copperhill Media. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controller Area Network (CAN) is a serial network technology that was originally designed for the automotive industry, but has also become a popular bus in industrial automation. The CAN bus is primarily used in embedded solutions and provides communication among microprocessors up to real-time requirements. A Comprehensible Guide To Controller Area Network represents a very thoroughly researched and complete work on CAN. It provides information on all CAN features and aspects combined with high level of readability. Book jacket.

Download or read book Embedded Networking with CAN and CANopen written by Olaf Pfeiffer and published by Copperhill Media. This book was released on 2008 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAN (Controller Area Network) is a serial communication protocol that was originally developed for the automobile industry. CAN is far superior to conventional serial technologies such as RS232 in regards to functionality and reliability and yet CAN implementations are more cost effective. CANopen, a higher layer protocol based on CAN, provides the means to apply the ingenious CAN features to a variety of industrial-strength applications. Many users, for example in the field of medical engineering, opted for CANopen because they have to meet particularly stringent safety requirements. Similar requirements had to be considered by manufacturers of other equipment with very high safety or reliability requirements (e.g. robots, lifts and transportation systems). Providing a detailed look at both CAN and CANopen, this book examines those technologies in the context of embedded networks. There is an overview of general embedded networking and an introduction to the primary functionality provided by CANopen. Everything one needs to know to configure and operate a CANopen network using off-the-shelf components is described, along with details for those designers who want to build their own CANopen nodes. The wide variety of applications for CAN and CANopen is discussed, and instructions in developing embedded networks based on the protocol are included. In addition, references and examples using MicroCANopen, PCANopen Magic, and Vector's high-end development tools are provided.

Download or read book Controller Area Network Prototyping with Arduino written by Wilfried Voss and published by . This book was released on 2014-03 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the Arduino is not widely considered an industrial-strength solution, it provides, due to its low price and ease of programming, the perfect prototyping platform for all kinds of Controller Area Network (CAN) applications. This book, written by a leading expert on CAN technologies, guides the reader through the process of acquiring all necessary hardware and software components, the implementation of the CAN driver, and the implementation of programs (Arduino Sketches) to read, send, process, and display data from and to a CAN network. The collection of programming examples cumulates into a full-fledged USB-to-CAN Gateway communicating with a Windows/Linux PC. This book will enable you to achieve CAN functionality literally within only a few hours. The topics include: Introduction to Controller Area Network Prototyping Hardware and its Variants Arduino CAN Shields CAN Driver Implementation and Library Functions Simple CAN Test Programs CAN Network Monitoring, Simulation, and Diagnostics Program CAN Data Display via Windows/Linux GUI About the Author Wilfried Voss is the author of the "Comprehensible Guide" series of technical literature covering topics like Controller Area Network (CAN), SAE J1939, Industrial Ethernet, and Servo Motor Sizing. Mr. Voss has worked in the CAN industry since 1997 and before that was a motion control engineer in the paper manufacturing industry. He has a master's degree in electrical engineering from the University of Wuppertal in Germany. During the past years, Mr. Voss conducted numerous seminars on industrial fieldbus systems such as CAN, CANopen, SAE J1939, Industrial Ethernet, and more during various Real Time Embedded And Computing Conferences (RTECC), ISA (Instrumentation, Systems, and Automation Society) conferences and various other events all over the United States and Canada."

Download or read book Microcontroller and Smart Home Networks written by Dawoud Shenouda Dawoud and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In smart home automation, several common smart home automation protocols that allow different devices to speak and communicate together have appeared during the last few decades. This book introduces to the reader some of the most popular Microcontroller and Smart home networks.

Download or read book CAN System Engineering written by Wolfhard Lawrenz and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the various challenges and open questions relating to CAN communication networks. Opening with a short introduction into the fundamentals of CAN, the book then examines the problems and solutions for the physical layout of networks, including EMC issues and topology layout. Additionally, a discussion of quality issues with a particular focus on test techniques is presented. Each chapter features a collection of illuminating insights and detailed technical information supplied by a selection of internationally-regarded experts from industry and academia. Features: presents thorough coverage of architectures, implementations and application of CAN transceiver, data link layer and so-called higher layer software; explains CAN EMC characteristics and countermeasures, as well as how to design CAN networks; demonstrates how to practically apply and test CAN systems; includes examples of real networks from diverse applications in automotive engineering, avionics, and home heating technology.

Download or read book Multiplexed Networks for Embedded Systems written by Dominique Paret and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiplexed networks are essential for the unified, efficient and cost-effective exchange of electronic information within embedded component systems. This is especially important in automotive manufacturing as vehicles become increasingly reliant on robust electronic networks and systems for improved reliability, anti-lock brake systems (ABS), steering, on-board navigation systems, and much more. The latest systems such as X-by-Wire and FlexRay aim to produce faster, fault-tolerant network component interconnects, for state-of-the-art network implementation and safer, more reliable engineering of vehicular systems. This book provides a thorough and comprehensive introduction to automotive multiplexed network buses, covering the technical principles, components, implementation issues and applications. Key features: Presents a thorough coverage of the controller area network (CAN) protocol, including information on physical layers, conformity problems, hardware and software tools, and application layers. Gives a detailed description of the new local interconnect network (LIN) bus, setting out its developments, properties, problems and ways to overcome these. Examines the existing and emerging network buses such as time-triggered CAN (TTCAN), FlexRay and X-by-Wire. Explores the possibilities for linking the various buses that are discussed, explaining how the Fail-Safe-System basis chip (SBC) and other gateways are designed and constructed. Analyses wired and wireless internal and external serial links, including Safe-by-Wire plus, I2C, Media Oriented Systems Transport (MOST), remote keyless entry, tyre pressure monitoring systems (TPMS) and Bluetooth. A valuable guide to embedded systems for a range of applications, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe-by-Wire...is essential reading for electronics engineers and researchers developing electronics for the automotive industry. It is also useful for practising aerospace engineers and other practitioners interested in the application of network technologies, and advanced students taking courses on automotive and embedded system design.

Download or read book Inter and Intra Vehicle Communications written by Gilbert Held and published by CRC Press. This book was released on 2007-11-08 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The PC revolution, the advent of PDAs, and growth in the use of wireless LANs have changed the way we live our lives. Next on the horizon is the application of new technologies that will change the way we drive our cars. De rigeur for many drivers, electronic passes and GPS systems represent the tip of the iceberg in terms of emerging applications

Download or read book Industrial Sensors and Controls in Communication Networks written by Dong-Seong Kim and published by Springer. This book was released on 2018-12-11 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative text/reference presents a detailed review of the state of the art in industrial sensor and control networks. The book examines a broad range of applications, along with their design objectives and technical challenges. The coverage includes fieldbus technologies, wireless communication technologies, network architectures, and resource management and optimization for industrial networks. Discussions are also provided on industrial communication standards for both wired and wireless technologies, as well as for the Industrial Internet of Things (IIoT). Topics and features: describes the FlexRay, CAN, and Modbus fieldbus protocols for industrial control networks, as well as the MIL-STD-1553 standard; proposes a dual fieldbus approach, incorporating both CAN and ModBus fieldbus technologies, for a ship engine distributed control system; reviews a range of industrial wireless sensor network (IWSN) applications, from environmental sensing and condition monitoring, to process automation; examines the wireless networking performance, design requirements, and technical limitations of IWSN applications; presents a survey of IWSN commercial solutions and service providers, and summarizes the emerging trends in this area; discusses the latest technologies and open challenges in realizing the vision of the IIoT, highlighting various applications of the IIoT in industrial domains; introduces a logistics paradigm for adopting IIoT technology on the Physical Internet. This unique work will be of great value to all researchers involved in industrial sensor and control networks, wireless networking, and the Internet of Things.

Download or read book MSP430 Microcontroller Basics written by John H. Davies and published by Elsevier. This book was released on 2008-08-21 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MSP430 microcontroller family offers ultra-low power mixed signal, 16-bit architecture that is perfect for wireless low-power industrial and portable medical applications. This book begins with an overview of embedded systems and microcontrollers followed by a comprehensive in-depth look at the MSP430. The coverage included a tour of the microcontroller's architecture and functionality along with a review of the development environment. Start using the MSP430 armed with a complete understanding of the microcontroller and what you need to get the microcontroller up and running! - Details C and assembly language for the MSP430 - Companion Web site contains a development kit - Full coverage is given to the MSP430 instruction set, and sigma-delta analog-digital converters and timers

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Automotive Ethernet written by Kirsten Matheus and published by Cambridge University Press. This book was released on 2015 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how automotive Ethernet is revolutionizing in-car networking from the experts at the core of its development. Providing an in-depth account of automotive Ethernet, from its background and development, to its future prospects, this book is ideal for industry professionals and academics alike.

Download or read book Controller Area Network Projects written by Dogan Ibrahim and published by . This book was released on 2011 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Controller Area Network (CAN) was originally developed to be used as a vehicle data bus system in passenger cars. Today, CAN controllers are available from over 20 manufacturers, and CAN is finding applications in other fields, such as medical, aerospace, process control, automation, and so on. This book is written for students, for practising engineers, for hobbyists, and for everyone else who may be interested to learn more about the CAN bus and its applications. The aim of this book is to teach you the basic principles of CAN networks and in addition the development of microcontroller based projects using the CAN bus. In summary, this book enables the reader to: Learn the theory of the CAN bus used in automotive industry; Learn the principles, operation, and programming of microcontrollers; Design complete microcontroller based projects using the C language; Develop complete real CAN bus projects using microcontrollers; Learn the principles of OBD systems used to debug vehicle electronics. You will learn how to design microcontroller based CAN bus nodes, build a CAN bus, develop high-level programs, and then exchange data in real-time over the bus. You will also learn how to build microcontroller hardware and interface it to LEDs, LCDs, and A/D converters. The book assumes that the reader has some knowledge on basic electronics. Knowledge of the C programming language will be useful in later chapters of the book, and familiarity with at least one member of the PIC series of microcontrollers will be an advantage, especially if the reader intends to develop microcontroller based projects using the CAN bus. The CD contains a special demo version of the mikroC compiler which supports the key microcontrollers including: PIC, dsPIC, PIC24, PIC32 and AVR. This special version additionally features an advanced CAN library of intuitive and simple-to-use functions to encourage programming with easy and comfortable development of CAN networks.

Download or read book Data Acquisition from HD Vehicles Using J1939 CAN Bus written by Richard P. Walter and published by . This book was released on 2016 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus is to guide the reader on how to acquire and correctly interpret data from the in-vehicle network of heavy-duty (HD) vehicles. The reader will learn how to convert messages to scaled engineering parameters, and how to determine the available parameters on HD vehicles, along with their accuracy and update rate.

Download or read book Time Triggered Communication written by Roman Obermaisser and published by CRC Press. This book was released on 2018-09-03 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-Triggered Communication helps readers build an understanding of the conceptual foundation, operation, and application of time-triggered communication, which is widely used for embedded systems in a diverse range of industries. This book assembles contributions from experts that examine the differences and commonalities of the most significant protocols including: TTP, FlexRay, TTEthernet, SAFEbus, TTCAN, and LIN. Covering the spectrum, from low-cost time-triggered fieldbus networks to ultra-reliable time-triggered networks used for safety-critical applications, the authors illustrate the inherent benefits of time-triggered communication in terms of predictability, complexity management, fault-tolerance, and analytical dependability modeling, which are key aspects of safety-critical systems. Examples covered include FlexRay in cars, TTP in railway and avionic systems, and TTEthernet in aerospace applications. Illustrating key concepts based on real-world industrial applications, this book: Details the underlying concepts and principles of time-triggered communication Explores the properties of a time-triggered communication system, contrasting its strengths and weaknesses Focuses on the core algorithms applied in many systems, including those used for clock synchronization, startup, membership, and fault isolation Describes the protocols that incorporate presented algorithms Covers tooling requirements and solutions for system integration, including scheduling The information in this book is extremely useful to industry leaders who design and manufacture products with distributed embedded systems based on time-triggered communication. It also benefits suppliers of embedded components or development tools used in this area. As an educational tool, this material can be used to teach students and working professionals in areas including embedded systems, computer networks, system architectures, dependability, real-time systems, and automotive, avionics, and industrial control systems.