Download or read book Controlled Synthesis and Chemical Design of Cuprous Delafossite Oxides for Energy Conversion and Catalysis written by Thomas I. Draskovic and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Cuprous delafossite oxides are a family of copper-based complex oxides uniquely structured with alternating layers of linearly coordinated O-CuI-O and MIIIO6 edge-shared octahedra. This structure is responsible for several interesting properties, such as p-type conductivity through a delocalized Cu 3d- and O 2p- orbital valence band, susceptibility to both extrinsic acceptor doping and oxygen intercalation, and high optical transparency. However, reported applications of these oxides have been relatively limited, especially compared to perovskite-structured oxides. One reason for this is likely the difficulties faced controlling morphology, impurities, and doping in their syntheses. The work presented here starts with this synthetic challenge, first focusing on the synthetic chemistry in understanding the phase formation and crystallization of CuScO2, then from the observed properties of CuScO2, the potential application of delafossite oxide as oxygen electrocatalysts is proposed and investigated.The properties of CuScO2, a potential p-type transparent conducting oxide, lead to several synthetic challenges. Significant oxygen intercalation within copper layer means control of oxidation proves difficult by the conventional solid state syntheses. Through consideration of copper and scandium species hydrolysis, the first hydrothermally synthesized pure-phase CuScO2 is reported. Post-annealing treatments were used to investigate the influence of oxygen intercalation and were found to increase copper oxidation, leading to increased light absorption, and flat-band potential shifts.The observed oxygen intercalation in CuScO2 led to an original research proposal and subsequent demonstration of cuprous delafossite oxides as catalysts for the alkaline oxygen reduction reaction. The delafossite structure possesses several key elements that could potentially make it desirable for ORR catalytic applications: the presence of low-coordination Cu-sites, accessible by O2 molecules, and the ability to alter lattice space around Cu-sites by changing the size of the MIII cation. CuLaO2 was found to have the most prevalent complete reduction of oxygen out the oxides tested. Finally, preliminary studies on the use of CuLaO2+x as a potential low temperature solid oxide fuel cell cathode material for low temperature oxygen reduction are presented. The experimental setup and custom fabricated cell holder are detailed, followed by electrochemical impedance spectroscopy tests to compare the oxide to commercially available cathode materials. The CuLaO2+x phase shows potential at very low temperature (
Download or read book Nanocatalysis written by Vivek Polshettiwar and published by John Wiley & Sons. This book was released on 2013-09-30 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhibiting both homogeneous and heterogeneous catalytic properties, nanocatalysts allow for rapid and selective chemical transformations, with the benefits of excellent product yield and ease of catalyst separation and recovery. This book reviews the catalytic performance and the synthesis and characterization of nanocatalysts, examining the current state of the art and pointing the way towards new avenues of research. Moreover, the authors discuss new and emerging applications of nanocatalysts and nanocatalysis, from pharmaceuticals to fine chemicals to renewable energy to biotransformations. Nanocatalysis features contributions from leading research groups around the world. These contributions reflect a thorough review of the current literature as well as the authors’ first-hand experience designing and synthesizing nanocatalysts and developing new applications for them. The book’s nineteen chapters offer a broad perspective, covering: Nanocatalysis for carbon-carbon and carbon-heteroatom coupling reactions Nanocatalysis for various organic transformations in fine chemical synthesis Nanocatalysis for oxidation, hydrogenation, and other related reactions Nanomaterial-based photocatalysis and biocatalysis Nanocatalysts to produce non-conventional energy such as hydrogen and biofuels Nanocatalysts and nano-biocatalysts in the chemical industry Readers will also learn about the latest spectroscopic and microscopy tools used in advanced characterization methods that shed new light on nanocatalysts and nanocatalysis. Moreover, the authors offer expert advice to help readers develop strategies to improve catalytic performance. Summarizing and reviewing all the most important advances in nanocatalysis over the last two decades, this book explains the many advantages of nanocatalysts over conventional homogeneous and heterogeneous catalysts, providing the information and guidance needed for designing green, sustainable catalytic processes.
Download or read book Amorphous Nanomaterials written by Lin Guo and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable overview covering important fundamental and applicative aspects of amorphous nanomaterials! Amorphous nanomaterials are very important in non-crystalline solids, which have emerged as a new category of advanced materials. Compared to the crystalline counterpart, amorphous nanomaterials with isotropic nature always exhibit fast ion diffusion, relieved strain, and higher reactivity, enabling such materials to exhibit high performance in mechanics and catalysis, as well as other interesting properties. Amorphous Nanomaterials: Preparation, Characterization, and Applications covers the fundamental concept, synthesis, characterization, properties, and applications of nanoscaled amorphous materials. It starts with the introduction of amorphous materials, then gives a global view of the history, structure, and growth mechanism of amorphous nanomaterials. Subsequently, some powerful techniques to characterize amorphous materials, such as X-ray absorption fine structure spectroscopy, spherical aberration electron microscope, in-situ-Transmission Electron Microscope, Electron Energy Loss Spectroscopy, and some other defect characterization technologies are included. Furthermore, the emerging innovative methods to fabricate well-defined, regularshaped amorphous nanomaterials, including zero-, one-, two-, and three-dimensional amorphous nanomaterials are systematically introduced. The fascinating properties and applications related to amorphous nanomaterials including the applications in electrocatalysis, batteries, supercapacitors, photocatalysis, mechanics, etc., are presented. It will greatly help the researchers to find professional answers related to amorphous materials. Great topic: amorphous nanomaterials are a very large and important field in both academia and industry Comprehensive: in-depth discussion of various important aspects, from both a fundamental and an applied point of view, on the chemistry, physics and technological importance of the amorphous nanomaterials are presented Vitally needed: the understanding of the fundamentals of amorphous nanomaterials is a prerequisite for devising new applications of such materials Highly relevant: amorphous nanomaterials have found specific applications in chemistry, catalysis, physics, sensing, batteries, supercapacitors, and engineering Amorphous Nanomaterials is a vital resource for materials scientists, inorganic and physical chemists, solid state chemists, physicists, catalytic and analytical chemists, as well as organic chemists.
Download or read book Layered Double Hydroxides written by Vicente Rives and published by Nova Publishers. This book was released on 2001 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Layered double hydroxides are one of the variety of names given to a family of layered materials first discovered in Sweden in 1842. These materials are interesting because their layer cations can be changed among a wide selection, and the interlayer anion can also be (nearly) freely chosen. Like cationic clays, they can be pillared and can exchange interlayer species -- thus increasing applications and making new routes to derivatives. The principle areas of application include catalyst support, anion scavengers, polymer stabilisers, and antacids. In the last several years, reviews and studies of LDHs have dealt with these uses. This book aims to update the current body of LDH knowledge from a wide array of views. The first section addresses the synthesis and physiochemical characterisation of these materials, and section two focuses on the applications of LDHs.
Download or read book Nanomaterials for Sustainable Energy written by Jingbo Louise Liu and published by ACS Symposium. This book was released on 2016-06-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motivation for alternative sources of energy is driven by societal needs and technical advancements in synthesis, design and characterization. Increases in raw material (oil, coal, natural gas) always lead to a reevaluation towards renewable and sustainable energy. The approach of the current generation is to investigate advanced responsive materials including polymers, ceramics and bi-functionalized materials for sustainable and green energy generation, transport, storage and usage. This book's focus covers the potential applications of nanomaterials in energy generation and storage. All ten chapter authors are leading exponents in their respective fields and have been directly or indirectly involved with the ACS symposium or monograph through a rigorous peer review process. This monograph presents an up-to-date and eminently readable collection of papers in energy conversion, storage, and modeling, which would be of great interest to practitioners, directors, fund and program managers, researchers, and engineers in the field of energy generation and storage.
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book A Contribution to the Knowledge of Wisconsin Syrphidae written by Charles Lewis Fluke and published by . This book was released on 1918 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photosynthesis written by Julian J. Eaton-Rye and published by Springer Science & Business Media. This book was released on 2011-11-04 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Photosynthesis: Plastid Biology, Energy Conversion and Carbon Assimilation” was conceived as a comprehensive treatment touching on most of the processes important for photosynthesis. Most of the chapters provide a broad coverage that, it is hoped, will be accessible to advanced undergraduates, graduate students, and researchers looking to broaden their knowledge of photosynthesis. For biologists, biochemists, and biophysicists, this volume will provide quick background understanding for the breadth of issues in photosynthesis that are important in research and instructional settings. This volume will be of interest to advanced undergraduates in plant biology, and plant biochemistry and to graduate students and instructors wanting a single reference volume on the latest understanding of the critical components of photosynthesis.
Download or read book Photoelectrochemical Hydrogen Production written by Roel van de Krol and published by Springer Science & Business Media. This book was released on 2011-11-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrochemical Hydrogen Production describes the principles and materials challenges for the conversion of sunlight into hydrogen through water splitting at a semiconducting electrode. Readers will find an analysis of the solid state properties and materials requirements for semiconducting photo-electrodes, a detailed description of the semiconductor/electrolyte interface, in addition to the photo-electrochemical (PEC) cell. Experimental techniques to investigate both materials and PEC device performance are outlined, followed by an overview of the current state-of-the-art in PEC materials and devices, and combinatorial approaches towards the development of new materials. Finally, the economic and business perspectives of PEC devices are discussed, and promising future directions indicated. Photoelectrochemical Hydrogen Production is a one-stop resource for scientists, students and R&D practitioners starting in this field, providing both the theoretical background as well as useful practical information on photoelectrochemical measurement techniques. Experts in the field benefit from the chapters on current state-of-the-art materials/devices and future directions.
Download or read book TiO2 Photocatalysis written by Akira Fujishima and published by . This book was released on 1999 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Transition Metal Carbides and Nitrides written by S.T. Oyama and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book arose from a symposium titled 'Transition Metal Carbides and Nitrides: Preparation, Properties, and Reactivity' organized by Jae Sung Lee, Masatoshi Nagai and myself. The symposium was part of the 1995 Congress of Pacific Rim Chemical Societies, held in Honolulu, Hawaii between December 17-22, 1995. The meeting was the first major conference to exclusively address the theme of metal carbides and nitrides, and brought together many of the major researchers in the field. Over 50 scientists and engineers reported their latest findings in five sessions of presentations and discussions. The book closely follows the topics covered in the conference: Theory of bonding Structure and composition Catalytic properties Physical properties New methods of preparation Spectroscopy and microscopy The book is unique in its coverage. It provides a general introduction to the properties and nature of the materials, but also covers their latest applications in a wide variety of fields. It should thus be of interest to both experts and nonexperts in the fields of material science, solid-state chemistry, physics, ceramics engineering, and catalysis. The first chapter gives an overview, and many of the chapters provide summaries of advanced topics. All contributions were peer-reviewed.
Download or read book Nanozymes Next Wave of Artificial Enzymes written by Xiaoyu Wang and published by Springer. This book was released on 2016-07-27 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental concepts, the latest developments and the outlook of the field of nanozymes (i.e., the catalytic nanomaterials with enzymatic characteristics). As one of today’s most exciting fields, nanozyme research lies at the interface of chemistry, biology, materials science and nanotechnology. Each of the book’s six chapters explores advances in nanozymes. Following an introduction to the rise of nanozymes research in the course of research on natural enzymes and artificial enzymes in Chapter 1, Chapters 2 through 5 discuss different nanomaterials used to mimic various natural enzymes, from carbon-based and metal-based nanomaterials to metal oxide-based nanomaterials and other nanomaterials. In each of these chapters, the nanomaterials’ enzyme mimetic activities, catalytic mechanisms and key applications are covered. In closing, Chapter 6 addresses the current challenges and outlines further directions for nanozymes. Presenting extensive information on nanozymes and supplemented with a wealth of color illustrations and tables, the book offers an ideal guide for readers from disparate areas, including analytical chemistry, materials science, nanoscience and nanotechnology, biomedical and clinical engineering, environmental science and engineering, green chemistry, and novel catalysis.
Download or read book Revolution of Perovskite written by Narayanasamy Sabari Arul and published by Springer Nature. This book was released on 2020-01-03 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents advanced synthesis techniques for fabricating Perovskite materials with enhanced properties for applications such as energy storage devices, photovoltaics, electrocatalysis, electronic devices, photocatalysts, sensing, and biomedical instruments. The book attempts to fill a gap in the published literature and provide a detailed reference on Perovskite materials. This book will be of use to graduate students and academic and industrial researchers in the fields of solid-state chemistry, physics, materials science, and chemical engineering.
Download or read book Photoelectrochemical Water Splitting written by Zhebo Chen and published by Springer Science & Business Media. This book was released on 2013-08-28 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines many of the techniques involved in materials development and characterization for photoelectrochemical (PEC) – for example, proper metrics for describing material performance, how to assemble testing cells and prepare materials for assessment of their properties, and how to perform the experimental measurements needed to achieve reliable results towards better scientific understanding. For each technique, proper procedure, benefits, limitations, and data interpretation are discussed. Consolidating this information in a short, accessible, and easy to read reference guide will allow researchers to more rapidly immerse themselves into PEC research and also better compare their results against those of other researchers to better advance materials development. This book serves as a “how-to” guide for researchers engaged in or interested in engaging in the field of photoelectrochemical (PEC) water splitting. PEC water splitting is a rapidly growing field of research in which the goal is to develop materials which can absorb the energy from sunlight to drive electrochemical hydrogen production from the splitting of water. The substantial complexity in the scientific understanding and experimental protocols needed to sufficiently pursue accurate and reliable materials development means that a large need exists to consolidate and standardize the most common methods utilized by researchers in this field.
Download or read book Solar Hydrogen Generation written by Krishnan Rajeshwar and published by Springer Science & Business Media. This book was released on 2008-02-21 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the backdrop of intense interest and widespread discussion on the prospects of a hydrogen energy economy, this book aims to provide an authoritative and up-to-date scientific account of hydrogen generation using solar energy and renewable sources such as water. While the technological and economic aspects of solar hydrogen generation are evolving, the scientific principles underlying various solar-assisted water splitting schemes already have a firm footing. This book aims to expose a broad-based audience to these principles. This book spans the disciplines of solar energy conversion, electrochemistry, photochemistry, photoelectrochemistry, materials chemistry, device physics/engineering, and biology.
Download or read book Spillover and Mobility of Species on Solid Surfaces written by A. Guerrero-Ruiz and published by Elsevier. This book was released on 2001-08-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.
Download or read book Nanoporous Gold written by Arne Wittstock and published by Royal Society of Chemistry. This book was released on 2012-03-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-surface-area materials have recently attracted significant interest due to potential applications in various fields such as electrochemistry and catalysis, gas-phase catalysis, optics, sensors and actuators, energy harvesting and storage. In contrast to classical materials the properties of high-surface-area materials are no longer determined by their bulk, but by their nanoscale architecture. Nanoporous gold (np-Au) represents the fascinating class of mesoporous metals that have been intensively investigated in recent years. The current interest and the increasing number of scientific publications show that np-Au by itself is an outstanding nano-material that justifies a book devoted to all aspects of its properties and applications. The resulting publication is a discussion of this unique nano-material and is an accessible and comprehensive introduction to the field. The book provides a broad, multi-disciplinary platform to learn more about the properties of nanoporous gold from an inter-disciplinary perspective. It starts with an introduction and overview of state-of-the-art applications and techniques characterizing this material and its applications. It then covers the progress in research within the last years. The chapters are in-depth overviews written by the world's leading scientists in the particular field. Each chapter covers one technique or application so that the reader can easily target their favoured topic and will get the latest and state-of-the-art information in the field.
