Download or read book Control Technologies for Emerging Micro and Nanoscale Systems written by Evangelos Eleftheriou and published by Springer. This book was released on 2011-07-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of the presentations made at the “Workshop on Dynamics and Control of Micro and Nanoscale Systems” held at IBM Research – Zurich, Switzerland, on the 10th and 11th of December 2009. The aim of the workshop was to bring together some of the leading researchers in the field of dynamics and control of micro- and nanoscale systems. It proved an excellent forum for discussing new ideas and approaches.

Download or read book Modeling and Control for Micro Nano Devices and Systems written by Ning Xi and published by CRC Press. This book was released on 2017-12-19 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nano-scale engineering—especially the design and implementation of ultra-fast and ultra-scale energy devices, sensors, and cellular and molecular systems—remains a daunting challenge. Modeling and control has played an essential role in many technological breakthroughs throughout the course of history. Therefore, the need for a practical guide to modeling and control for micro/nano-scale devices and systems has emerged. The first edited volume to address this rapidly growing field, Modeling and Control for Micro/Nano Devices and Systems gives control engineers, lab managers, high-tech researchers, and graduate students easy access to the expert contributors’ cutting-edge knowledge of micro/nanotechnology, energy, and bio-systems. The editors offer an integrated view from theory to practice, covering diverse topics ranging from micro/nano-scale sensors to energy devices and control of biology systems in cellular and molecular levels. The book also features numerous case studies for modeling of micro/nano devices and systems, and explains how the models can be used for control and optimization purposes. Readers benefit from learning the latest modeling techniques for micro/nano-scale devices and systems, and then applying those techniques to their own research and development efforts.

Download or read book Feedback Control of MEMS to Atoms written by Jason J. Gorman and published by Springer. This book was released on 2011-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control from MEMS to Atoms illustrates the use of control and control systems as an essential part of functioning integrated systems. The book is organized according to the dimensional scale of the problem, starting with micro-scale systems and ending with atomic-scale systems. Similar to macro-scale machines and processes, control systems can play a major role in improving the performance of micro- and nano-scale systems and in enabling new capabilities that would otherwise not be possible. However, the majority of problems at these scales present many new challenges that go beyond the current state-of-the-art in control engineering. This is a result of the multidisciplinary nature of micro/nanotechnology, which requires the merging of control engineering with physics, biology and chemistry.

Download or read book Advanced Mechatronics and MEMS Devices II written by Dan Zhang and published by Springer. This book was released on 2016-10-18 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intelligent manufacturing.

Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.

Download or read book Identification for Automotive Systems written by Daniel Alberer and published by Springer. This book was released on 2011-12-04 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing complexity and performance and reliability expectations make modeling of automotive system both more difficult and more urgent. Automotive control has slowly evolved from an add-on to classical engine and vehicle design to a key technology to enforce consumption, pollution and safety limits. Modeling, however, is still mainly based on classical methods, even though much progress has been done in the identification community to speed it up and improve it. This book, the product of a workshop of representatives of different communities, offers an insight on how to close the gap and exploit this progress for the next generations of vehicles.

Download or read book Surface Tension in Microsystems written by Pierre Lambert and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how surface tension effects can be used by engineers to provide mechanical functions in miniaturized products (1 mm). Even if precursors of this field such as Jurin or Laplace already date back to the 18th century, describing surface tension effects from a mechanical perspective is very recent.brThe originality of this book is to consider the effects of capillary bridges on solids, including forces and torques exerted both statically and dynamically by the liquid along the 6 degrees-of-freedom.brIt provides a comprehensive approach to various applications, such as capillary adhesion (axial force), centering force in packaging and micro-assembly (lateral force) and recent developments such as a capillary motor (torque).

Download or read book Systems Engineering for Microscale and Nanoscale Technologies written by M. Ann Garrison Darrin and published by CRC Press. This book was released on 2016-04-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: To realize the full potential of micro- and nanoscale devices in system building, it is critical to develop systems engineering methodologies that successfully integrate stand-alone, small-scale technologies that can effectively interface with the macro world. So how do we accomplish this?Systems Engineering for Microscale and Nanoscale Technologie

Download or read book Time Delay Systems Methods Applications and New Trends written by Rifat Sipahi and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the control and dynamics of time delay systems; a research field with at least six-decade long history that has been very active especially in the past two decades. In parallel to the new challenges emerging from engineering, physics, mathematics, and economics, the volume covers several new directions including topology induced stability, large-scale interconnected systems, roles of networks in stability, and new trends in predictor-based control and consensus dynamics. The associated applications/problems are described by highly complex models, and require solving inverse problems as well as the development of new theories, mathematical tools, numerically-tractable algorithms for real-time control. The volume, which is targeted to present these developments in this rapidly evolving field, captures a careful selection of the most recent papers contributed by experts and collected under five parts: (i) Methodology: From Retarded to Neutral Continuous Delay Models, (ii) Systems, Signals and Applications, (iii): Numerical Methods, (iv) Predictor-based Control and Compensation, and (v) Networked Control Systems and Multi-agent Systems.

Download or read book Control Systems with Saturating Inputs written by Maria Letizia Corradini and published by Springer Science & Business Media. This book was released on 2012-01-26 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Saturation nonlinearities are ubiquitous in engineering systems: every physical actuator or sensor is subject to saturation owing to its maximum and minimum limits. Input saturation is an operating condition that is well known to the control community for its “side effects”, which cause conventional controllers to lose their closed-loop performance as well as control authority in stabilization. Therefore, the practical application of control theory cannot avoid taking into account saturation nonlinearities in actuators, explicitly dealing with constraints in control design.

Download or read book Complexity Analysis and Control of Singular Biological Systems written by Qingling Zhang and published by Springer Science & Business Media. This book was released on 2012-02-18 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity, Analysis and Control of Singular Biological Systems follows the control of real-world biological systems at both ecological and phyisological levels concentrating on the application of now-extensively-investigated singular system theory. Much effort has recently been dedicated to the modelling and analysis of developing bioeconomic systems and the text establishes singular examples of these, showing how proper control can help to maintain sustainable economic development of biological resources. The book begins from the essentials of singular systems theory and bifurcations before tackling the use of various forms of control in singular biological systems using examples including predator-prey relationships and viral vaccination and quarantine control. Researchers and graduate students studying the control of complex biological systems are shown how a variety of methods can be brought to bear and practitioners working with the economics of biological systems and their control will also find the monograph illuminating.

Download or read book Optimal Sensor Networks Scheduling in Identification of Distributed Parameter Systems written by Maciej Patan and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor networks have recently come into prominence because they hold the potential to revolutionize a wide spectrum of both civilian and military applications. An ingenious characteristic of sensor networks is the distributed nature of data acquisition. Therefore they seem to be ideally prepared for the task of monitoring processes with spatio-temporal dynamics which constitute one of most general and important classes of systems in modelling of the real-world phenomena. It is clear that careful deployment and activation of sensor nodes are critical for collecting the most valuable information from the observed environment. Optimal Sensor Network Scheduling in Identification of Distributed Parameter Systems discusses the characteristic features of the sensor scheduling problem, analyzes classical and recent approaches, and proposes a wide range of original solutions, especially dedicated for networks with mobile and scanning nodes. Both researchers and practitioners will find the case studies, the proposed algorithms, and the numerical examples to be invaluable.

Download or read book Advanced Control of Piezoelectric Micro Nano Positioning Systems written by Qingsong Xu and published by Springer. This book was released on 2015-08-28 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores emerging methods and algorithms that enable precise control of micro-/nano-positioning systems. The text describes three control strategies: hysteresis-model-based feedforward control and hysteresis-model-free feedback control based on and free from state observation. Each paradigm receives dedicated attention within a particular part of the text. Readers are shown how to design, validate and apply a variety of new control approaches in micromanipulation: hysteresis modelling, discrete-time sliding-mode control and model-reference adaptive control. Experimental results are provided throughout and build up to a detailed treatment of practical applications in the fourth part of the book. The applications focus on control of piezoelectric grippers. Advanced Control of Piezoelectric Micro-/Nano-Positioning Systems will assist academic researchers and practising control and mechatronics engineers interested in suppressing sources of nonlinearity such as hysteresis and drift when combining position and force control of precision systems with piezoelectric actuation.

Download or read book Smart Materials Based Actuators at the Micro Nano Scale written by Micky Rakotondrabe and published by Springer Science & Business Media. This book was released on 2013-06-28 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Materials-Based Actuators at the Micro/Nano-Scale: Characterization, Control, and Applications gives a state of the art of emerging techniques to the characterization and control of actuators based on smart materials working at the micro/nano scale. The book aims to characterize some commonly used structures based on piezoelectric and electroactive polymeric actuators and also focuses on various and emerging techniques employed to control them. This book also includes two of the most emerging topics and applications: nanorobotics and cells micro/nano-manipulation.

Download or read book Implications of Emerging Micro and Nanotechnologies written by National Research Council and published by National Academies Press. This book was released on 2003-02-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expansion of micro-technology applications and rapid advances in nano-science have generated considerable interest by the Air Force in how these developments will affect the nature of warfare and how it could exploit these trends. The report notes four principal themes emerging from the current technological trends: increased information capability, miniaturization, new materials, and increased functionality. Recommendations about Air Force roles in micro- and nanotechnology research are presented including those areas in which the Air Force should take the lead. The report also provides a number of technical and policy findings and recommendations that are critical for effective development of the Air Force's micro- and nano-science and technology program

Download or read book Robot Motion and Control 2011 written by Krzysztof Kozłowski and published by Springer. This book was released on 2012-01-13 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Motion Control 2011 presents very recent results in robot motion and control. Forty short papers have been chosen from those presented at the sixth International Workshop on Robot Motion and Control held in Poland in June 2011. The authors of these papers have been carefully selected and represent leading institutions in this field. The following recent developments are discussed: Design of trajectory planning schemes for holonomic and nonholonomic systems with optimization of energy, torque limitations and other factors. New control algorithms for industrial robots, nonholonomic systems and legged robots. Different applications of robotic systems in industry and everyday life, like medicine, education, entertainment and others. Multiagent systems consisting of mobile and flying robots with their applications The book is suitable for graduate students of automation and robotics, informatics and management, mechatronics, electronics and production engineering systems as well as scientists and researchers working in these fields.

Download or read book Functional Observers for Dynamical Systems written by Hieu Trinh and published by Springer. This book was released on 2011-10-22 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of linear functional observers, which is the subject of this book, is increasingly becoming a popular researched topic because of the many advantages it presents in state observation and control system design. This book presents recent information on the current state of the art research in this field. This book will serve as a useful reference to researchers in this area of research to understand the fundamental concepts relevant to the theory of functional observers and to gather most recent advancements in the field. This book is useful to academics and postgraduate students researching into the theory of linear functional observers. This book can also be useful for specialized final year undergraduate courses in control systems engineering and applied mathematics with a research focus.