Download or read book Control Perspectives on Numerical Algorithms and Matrix Problems written by Amit Bhaya and published by SIAM. This book was released on 2006-01-01 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Perspectives on Numerical Algorithms and Matrix Problems organizes the analysis and design of iterative numerical methods from a control perspective. The authors discuss a variety of applications, including iterative methods for linear and nonlinear systems of equations, neural networks for linear and quadratic programming problems, support vector machines, integration and shooting methods for ordinary differential equations, matrix preconditioning, matrix stability, and polynomial zero finding. This book opens up a new field of interdisciplinary research that should lead to insights in the areas of both control and numerical analysis and shows that a wide range of applications can be approached from, and benefit from, a control perspective.

Download or read book Perspectives in Mathematical System Theory Control and Signal Processing written by Jan C. Willems and published by Springer. This book was released on 2010-03-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift, published on the occasion of the sixtieth birthday of Yutaka - mamoto (‘YY’ as he is occasionally casually referred to), contains a collection of articles by friends, colleagues, and former Ph.D. students of YY. They are a tribute to his friendship and his scienti?c vision and oeuvre, which has been a source of inspiration to the authors. Yutaka Yamamoto was born in Kyoto, Japan, on March 29, 1950. He studied applied mathematics and general engineering science at the Department of Applied Mathematics and Physics of Kyoto University, obtaining the B.S. and M.Sc. degrees in 1972 and 1974. His M.Sc. work was done under the supervision of Professor Yoshikazu Sawaragi. In 1974, he went to the Center for Mathematical System T- ory of the University of Florida in Gainesville. He obtained the M.Sc. and Ph.D. degrees, both in Mathematics, in 1976 and 1978, under the direction of Professor Rudolf Kalman.

Download or read book Structure Exploiting Numerical Algorithms for Optimal Control written by Isak Nielsen and published by Linköping University Electronic Press. This book was released on 2017-04-20 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical algorithms for efficiently solving optimal control problems are important for commonly used advanced control strategies, such as model predictive control (MPC), but can also be useful for advanced estimation techniques, such as moving horizon estimation (MHE). In MPC, the control input is computed by solving a constrained finite-time optimal control (CFTOC) problem on-line, and in MHE the estimated states are obtained by solving an optimization problem that often can be formulated as a CFTOC problem. Common types of optimization methods for solving CFTOC problems are interior-point (IP) methods, sequential quadratic programming (SQP) methods and active-set (AS) methods. In these types of methods, the main computational effort is often the computation of the second-order search directions. This boils down to solving a sequence of systems of equations that correspond to unconstrained finite-time optimal control (UFTOC) problems. Hence, high-performing second-order methods for CFTOC problems rely on efficient numerical algorithms for solving UFTOC problems. Developing such algorithms is one of the main focuses in this thesis. When the solution to a CFTOC problem is computed using an AS type method, the aforementioned system of equations is only changed by a low-rank modification between two AS iterations. In this thesis, it is shown how to exploit these structured modifications while still exploiting structure in the UFTOC problem using the Riccati recursion. Furthermore, direct (non-iterative) parallel algorithms for computing the search directions in IP, SQP and AS methods are proposed in the thesis. These algorithms exploit, and retain, the sparse structure of the UFTOC problem such that no dense system of equations needs to be solved serially as in many other algorithms. The proposed algorithms can be applied recursively to obtain logarithmic computational complexity growth in the prediction horizon length. For the case with linear MPC problems, an alternative approach to solving the CFTOC problem on-line is to use multiparametric quadratic programming (mp-QP), where the corresponding CFTOC problem can be solved explicitly off-line. This is referred to as explicit MPC. One of the main limitations with mp-QP is the amount of memory that is required to store the parametric solution. In this thesis, an algorithm for decreasing the required amount of memory is proposed. The aim is to make mp-QP and explicit MPC more useful in practical applications, such as embedded systems with limited memory resources. The proposed algorithm exploits the structure from the QP problem in the parametric solution in order to reduce the memory footprint of general mp-QP solutions, and in particular, of explicit MPC solutions. The algorithm can be used directly in mp-QP solvers, or as a post-processing step to an existing solution.

Download or read book Neural Dynamics for Time varying Problems written by Long Jin and published by Springer Nature. This book was released on with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lagrange Multiplier Approach to Variational Problems and Applications written by Kazufumi Ito and published by SIAM. This book was released on 2008-11-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyses Lagrange multiplier theory and demonstrates its impact on the development of numerical algorithms for variational problems in function spaces.

Download or read book Design of Distributed and Robust Optimization Algorithms A Systems Theoretic Approach written by Simon Michalowsky and published by Logos Verlag Berlin GmbH. This book was released on 2020-04-17 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization algorithms are the backbone of many modern technologies. In this thesis, we address the analysis and design of optimization algorithms from a systems theoretic viewpoint. By properly recasting the algorithm design as a controller synthesis problem, we derive methods that enable a systematic design of tailored optimization algorithms. We consider two specific classes of optimization algorithms: (i) distributed, and (ii) robust optimization algorithms. Concerning (i), we utilize ideas from geometric control in an innovative fashion to derive a novel methodology that enables the design of distributed optimization algorithms under minimal assumptions on the graph topology and the structure of the optimization problem. Concerning (ii), we employ robust control techniques to establish a framework for the analysis of existing algorithms as well as the design of novel robust optimization algorithms with specified guarantees.

Download or read book Practical Methods for Optimal Control and Estimation Using Nonlinear Programming written by John T. Betts and published by SIAM. This book was released on 2010-01-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: A focused presentation of how sparse optimization methods can be used to solve optimal control and estimation problems.

Download or read book Numerical Methods for Optimal Control Problems written by Maurizio Falcone and published by Springer. This book was released on 2019-01-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents recent mathematical methods in the area of optimal control with a particular emphasis on the computational aspects and applications. Optimal control theory concerns the determination of control strategies for complex dynamical systems, in order to optimize some measure of their performance. Started in the 60's under the pressure of the "space race" between the US and the former USSR, the field now has a far wider scope, and embraces a variety of areas ranging from process control to traffic flow optimization, renewable resources exploitation and management of financial markets. These emerging applications require more and more efficient numerical methods for their solution, a very difficult task due the huge number of variables. The chapters of this volume give an up-to-date presentation of several recent methods in this area including fast dynamic programming algorithms, model predictive control and max-plus techniques. This book is addressed to researchers, graduate students and applied scientists working in the area of control problems, differential games and their applications.

Download or read book L1 Adaptive Control Theory written by Naira Hovakimyan and published by SIAM. This book was released on 2010-09-30 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains results not yet published in technical journals and conference proceedings.

Download or read book Numerical Linear Algebra and Applications written by Biswa Nath Datta and published by SIAM. This book was released on 2010-02-04 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: An undergraduate textbook that highlights motivating applications and contains summary sections, examples, exercises, online MATLAB codes and a MATLAB toolkit. All the major topics of computational linear algebra are covered, from basic concepts to advanced topics such as the quadratic eigenvalue problem in later chapters.

Download or read book Nonlinear Control Under Nonconstant Delays written by Nikolaos Bekiaris-Liberis and published by SIAM. This book was released on 2013-09-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors have developed a methodology for control of nonlinear systems in the presence of long delays, with large and rapid variation in the actuation or sensing path, or in the presence of long delays affecting the internal state of a system. In addition to control synthesis, they introduce tools to quantify the performance and the robustness properties of the designs provided in the book. The book is based on the concept of predictor feedback and infinite-dimensional backstepping transformation for linear systems and the authors guide the reader from the basic ideas of the concept?with constant delays only on the input?all the way through to nonlinear systems with state-dependent delays on the input as well as on system states. Readers will find the book useful because the authors provide elegant and systematic treatments of long-standing problems in delay systems, such as systems with state-dependent delays that arise in many applications. In addition, the authors give all control designs by explicit formulae, making the book especially useful for engineers who have faced delay-related challenges and are concerned with actual implementations and they accompany all control designs with Lyapunov-based analysis for establishing stability and performance guarantees.

Download or read book Applications to Regular and Bang Bang Control written by Nikolai P. Osmolovskii and published by SIAM. This book was released on 2014-02-27 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book devoted to second-order optimality conditions in the calculus of variations and optimal control, suitable for researchers and engineers.

Download or read book Stochastic Processes Estimation and Control written by Jason L. Speyer and published by SIAM. This book was released on 2008-01-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty and risk are integral to engineering because real systems have inherent ambiguities that arise naturally or due to our inability to model complex physics. The authors discuss probability theory, stochastic processes, estimation, and stochastic control strategies and show how probability can be used to model uncertainty in control and estimation problems. The material is practical and rich in research opportunities.

Download or read book Control and Optimization with Differential Algebraic Constraints written by Lorenz T. Biegler and published by SIAM. This book was released on 2012-11-01 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cutting-edge guide to modelling complex systems with differential-algebraic equations, suitable for applied mathematicians, engineers and computational scientists.

Download or read book Primer on Optimal Control Theory written by Jason L. Speyer and published by SIAM. This book was released on 2010-01-01 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of a process -- for example, how an aircraft consumes fuel -- can be enhanced when the most effective controls and operating points for the process are determined. This holds true for many physical, economic, biomedical, manufacturing, and engineering processes whose behavior can often be influenced by altering certain parameters or controls to optimize some desired property or output.

Download or read book Adaptive Control Tutorial written by Petros Ioannou and published by SIAM. This book was released on 2006-01-01 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the design, analysis, and application of a wide variety of algorithms that can be used to manage dynamical systems with unknown parameters.

Download or read book UAV Cooperative Decision and Control written by Tal Shima and published by SIAM. This book was released on 2009-02-19 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on cooperative decision and control of unmanned aerial vehicles.