Download or read book Control of Permanent Magnet Synchronous Motors written by Sadegh Vaez-Zadeh and published by Oxford University Press. This book was released on 2018-02-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous (PMS) motors stand at the forefront of electric motor development due to their energy saving capabilities and performance potential. The motors have been developed in response to mounting environmental crises and growing electricity prices, and they have enabled the emergence of motor drive applications like those found in electric and hybrid vehicles, fly by wire, and drones. Control of Permanent Magnet Synchronous Motors is a timely advancement along that path as the first comprehensive, self-contained, and thoroughly up-to-date book devoted solely to the control of PMS motors. It offers a deep and extended analysis, design, implementation, and performance evaluation of major motor control methods, including Vector, Direct Torque, Predictive, Deadbeat, and Combined Control, in a systematic and coherent manner. All major Sensorless Control and Parameter Estimation methods are also studied. The book places great emphasis on energy saving control schemes.

Download or read book Control of Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous motors are indubitably the most effective device to drive industrial production systems and robots with precision and rapidity. Their control law is thus critical for combining at the same time high productivity to reduced energy consummation. As far as possible, the control algorithms must exploit the properties of these actuators. Therefore, this work draws on well adapted models resulting from the Park’s transformation, for both the most traditional machines with sinusoidal field distribution and for machines with non-sinusoidal field distribution which are more and more used in industry. Both, conventional control strategies like vector control (either in the synchronous reference frame or in the rotor frame) and advanced control theories like direct control and predictive control are thoroughly presented. In this context, a significant place is reserved to sensorless control which is an important and critical issue in tomorrow’s motors.

Download or read book Control of Non conventional Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical synchronous motors are the most effective device to drive industrial production systems and robots with precision and rapidity. However, numerous applications require efficient controls in non-conventional situations. Firstly, this is the case with synchronous motors supplied by thyristor line-commutated inverters, or with synchronous motors with faults on one or several phases. Secondly, many drive systems use non-conventional motors such as polyphase (more than three phases) synchronous motors, synchronous motors with double excitation, permanent magnet linear synchronous motors, synchronous and switched reluctance motors, stepping motors and piezoelectric motors. This book presents efficient controls to improve the use of these non-conventional motors. Contents 1. Self-controlled Synchronous Motor: Principles of Function and Simplified Control Model, Francis Labrique and François Baudart. 2. Self-controlled Synchronous Motor: Dynamic Model Including the Behavior of Damper Windings and Commutation Overlap, Ernest Matagne. 3. Synchronous Machines in Degraded Mode, Damien Flieller, Ngac Ky Nguyen, Hervé Schwab and Guy Sturtzer. 4. Control of the Double-star Synchronous Machine Supplied by PWM Inverters, Mohamed Fouad Benkhoris. 5. Vectorial Modeling and Control of Multiphase Machines with Non-salient Poles Supplied by an Inverter, Xavier Kestelyn and Éric Semail. 6. Hybrid Excitation Synchronous Machines, Nicolas Patin and Lionel Vido. 7. Advanced Control of the Linear Synchronous Motor, Ghislain Remy and Pierre-Jean Barre. 8. Variable Reluctance Machines: Modeling and Control, Mickael Hilairet, Thierry Lubin and Abdelmounaïm Tounzi. 9. Control of the Stepping Motor, Bruno Robert and Moez Feki . 10. Control of Piezoelectric Actuators, Frédéric Giraud and Betty Lemaire-Semail.

Download or read book Direct Eigen Control for Induction Machines and Synchronous Motors written by Jean Claude Alacoque and published by John Wiley & Sons. This book was released on 2012-10-09 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear presentation of a new control process applied to induction machine (IM), surface mounted permanent magnet synchronous motor (SMPM-SM) and interior permanent magnet synchronous motor (IPM-SM) Direct Eigen Control for Induction Machines and Synchronous Motors provides a clear and consise explanation of a new method in alternating current (AC) motor control. Unlike similar books on the market, it does not present various control algorithms for each type of AC motor but explains one method designed to control all AC motor types: Induction Machine (IM), Surface Mounted Permanent Magnet Synchronous Motor (SMPM-SM) (i.e. Brushless) and Interior Permanent Magnet Synchronous Motor (IPM-SM). This totally new control method can be used not only for AC motor control but also to control input filter current and voltage of an inverter feeding an AC motor. Accessible and clear, describes a new fast type of motor control applied to induction machine (IM), surface mounted permanent magnet synchronous motor (SM-PMSM) and interior permanent magnet synchronous motor (I-PMSM) with various examples Summarizes a method that supersedes the two known direct control solutions – Direct Self Control and Direct Torque Control – to be used for AC motor control and to control input filter current and voltage of an inverter feeding an AC motor Presents comprehensive simulations that are easy for the reader to reproduce on a computer. A control program is hosted on a companion website This book is straight-forward with clear mathematical description. It presents simulations in a way that is easy to understand and to reproduce on a computer, whilst omitting details of practical hardware implementation of control, in order for the main theory to take focus. The book remains concise by leaving out description of sensorless controls for all motor types. The sections on “Control Process”, “Real Time Implementation” and “Kalman Filter Observer and Prediction” in the introductory chapters explain how to practically implement, in real time, the discretized control with all three types of AC motors. In order, this book describes induction machine, SMPM-SM, IPM-SM, and, application to LC filter limitations. The appendixes present: PWM vector calculations; transfer matrix calculation; transfer matrix inversion; Eigen state space vector calculation; and, transition and command matrix calculation. Essential reading for Researchers in the field of drive control; graduate and post-graduate students studying electric machines; electric engineers in the field of railways, electric cars, plane surface control, military applications. The approach is also valuable for Engineers in the field of machine tools, robots and rolling mills.

Download or read book Advanced Direct Thrust Force Control of Linear Permanent Magnet Synchronous Motor written by Muhammad Ali Masood Cheema and published by Springer Nature. This book was released on 2020-02-13 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the direct thrust force control (DTFC) of tubular surface-mount linear permanent magnet synchronous motors (linear PMSMs). It presents a detailed account and analysis of several advanced nonlinear control schemes, based on the direct thrust control principle, to achieve a reduction in steady-state ripple in thrust force with faster transient response, and describes their experimental validation. It also provides rigorous details of the dynamic modelling of linear PMSMs from a control system perspective, and demonstrates the superior control performance of the proposed techniques compared to the current state-of-the-art techniques. Lastly, the book proposes and validates a stator flux observer for sensorless speed estimation comprising a linear state observer and an improved sliding mode component.

Download or read book Sliding Mode Control for Synchronous Electric Drives written by Sergey E. Ryvkin and published by CRC Press. This book was released on 2011-11-21 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the theory of control systems with sliding mode applied to electrical motors and power converters. It demonstrates the methodology of control design and the original algorithms of control and observation. Practically all semiconductor devices are used in power converters, that feed electrical motors, as power switches. A switch

Download or read book Linear Synchronous Motors written by Jacek F. Gieras and published by CRC Press. This book was released on 2018-04-20 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered to be the first book devoted to the subject, Linear Synchronous Motors: Transportation and Automation Systems, Second Edition evaluates the state of the art, demonstrating the technological innovations that are improving the design, construction, and performance of modern control systems. This new edition not only illustrates the development of linear synchronous motor drives, but it also discusses useful techniques for selecting a motor that will meet the specific requirements of linear electrical drives. New Features for the Second Edition: Several updated and expanded sections, as well as two new chapters on FEM Even more numerical examples, calculations, and mathematical models Broadened target audience that includes researchers, scientists, students, and more Evaluating trends and practical techniques for achieving optimal system performance, the authors showcase ready-to-implement solutions for common roadblocks in this process. The book presents fundamental equations and calculations used to determine and evaluate system operation, efficiency, and reliability, with an exploration of modern computer-aided design of linear synchronous motors, including the finite element approach. It covers topics such as linear sensors and stepping motors, magnetic levitation systems, elevators, and factory automation systems. It also features case studies on flat PM, tubular PM, air-cored, and hybrid linear synchronous motors, as well as 3D finite element method analysis of tubular linear reluctance motors, and linear oscillatory actuators. With such an exceptional presentation of practical tools and conceptual illustrations, this volume is an especially powerful resource. It will benefit readers from all walks by providing numerical examples, models, guidelines, and diagrams to help develop a clear understanding of linear synchronous motor operations, characteristics, and much more.

Download or read book AC Electric Motors Control written by Fouad Giri and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state variable estimation in the absence of mechanical sensors, power factor correction, machine flux optimization, fault detection and isolation, and fault tolerant control. Describing the complete control approach, both controller and observer designs are demonstrated using advanced nonlinear methods, stability and performance are analysed using powerful techniques, including implementation considerations using digital computing means. Other key features: • Covers the main types of AC motors including triphase, multiphase, and doubly fed induction motors, wound rotor, permanent magnet, and interior PM synchronous motors • Illustrates the usefulness of the advanced control methods via industrial applications including electric vehicles, high speed trains, steel mills, and more • Includes special focus on sensorless nonlinear observers, adaptive and robust nonlinear controllers, output-feedback controllers, fault detection and isolation algorithms, and fault tolerant controllers This comprehensive volume provides researchers and designers and R&D engineers with a single-source reference on AC motor system drives in the automotive and transportation industry. It will also appeal to advanced students in automatic control, electrical, power systems, mechanical engineering and robotics, as well as mechatronic, process, and applied control system engineers.

Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.

Download or read book Life System Modeling and Intelligent Computing written by Kang Li and published by Springer. This book was released on 2010-09-14 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2010 International Conference on Life System Modeling and Simulation (LSMS 2010) and the 2010 International Conference on Intelligent Computing for Sustainable Energy and Environment (ICSEE 2010) were formed to bring together researchers and practitioners in the fields of life system modeling/simulation and intelligent computing applied to worldwide sustainable energy and environmental applications. A life system is a broad concept, covering both micro and macro components ra- ing from cells, tissues and organs across to organisms and ecological niches. To c- prehend and predict the complex behavior of even a simple life system can be - tremely difficult using conventional approaches. To meet this challenge, a variety of new theories and methodologies have emerged in recent years on life system modeling and simulation. Along with improved understanding of the behavior of biological systems, novel intelligent computing paradigms and techniques have emerged to h- dle complicated real-world problems and applications. In particular, intelligent c- puting approaches have been valuable in the design and development of systems and facilities for achieving sustainable energy and a sustainable environment, the two most challenging issues currently facing humanity. The two LSMS 2010 and ICSEE 2010 conferences served as an important platform for synergizing these two research streams.

Download or read book Electric Motor Control written by Sang-Hoon Kim and published by Elsevier. This book was released on 2017-05-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Motor Control: DC, AC, and BLDC Motors introduces practical drive techniques of electric motors to enable stable and efficient control of many application systems, also covering basic principles of high-performance motor control techniques, driving methods, control theories and power converters. Electric motor drive systems play a critical role in home appliances, motor vehicles, robotics, aerospace and transportation, heating ventilating and cooling equipment’s, robotics, industrial machinery and other commercial applications. The book provides engineers with drive techniques that will help them develop motor drive system for their applications. Includes practical solutions and control techniques for industrial motor drive applications currently in use Contains MATLAB/Simulink simulation files Enables engineers to understand the applications and advantages of electric motor drive systems

Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.

Download or read book Control of Permanent Magnet Synchronous Motors written by Sadegh Vaez-Zadeh and published by Oxford University Press. This book was released on 2018 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous (PMS) motors stand at the forefront of electric motor development due to their energy saving capabilities and performance potential. This book is a timely advancement along that path as the first comprehensive, self-contained, and thoroughly up-to-date book devoted solely to the control of PMS motors.

Download or read book Permanent Magnet Synchronous Machines and Drives written by Wei Xu and published by CRC Press. This book was released on 2023-07-31 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous motors (PMSMs) are popular in the electric vehicle industry due to their high-power density, large torque-to-inertia ratio, and high reliability. This book presents an improved field-oriented control (FOC) strategy for PMSMs that utilizes optimal proportional-integral (PI) parameters to achieve robust stability, faster dynamic response, and higher efficiency in the flux-weakening region. The book covers the combined design of a PI current regulator and varying switching frequency pulse-width modulation (PWM), along with an improved linear model predictive control (MPC) strategy. Researchers and graduate students in electrical engineering, systems and control, and electric vehicles will find this book useful. Features: • Implements evolutionary optimization algorithms to improve PMSM performance. • Provides coverage of PMSM control design in the flux-weakening region. • Proposes a modern method of model predictive control to improve the dynamic performance of interior PMSM. • Studies the dynamic performance of two kinds of PMSMs: surface-mounted and interior permanent magnet types. • Includes several case studies and illustrative examples with MATLAB®. This book is aimed at researchers, graduate students, and libraries in electrical engineering with specialization in systems and control and electric vehicles.

Download or read book Sensorless AC Electric Motor Control written by Alain Glumineau and published by Springer. This book was released on 2015-03-16 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph shows the reader how to avoid the burdens of sensor cost, reduced internal physical space, and system complexity in the control of AC motors. Many applications fields—electric vehicles, wind- and wave-energy converters and robotics, among them—will benefit. Sensorless AC Electric Motor Control describes the elimination of physical sensors and their replacement with observers, i.e., software sensors. Robustness is introduced to overcome problems associated with the unavoidable imperfection of knowledge of machine parameters—resistance, inertia, and so on—encountered in real systems. The details of a large number of speed- and/or position-sensorless ideas for different types of permanent-magnet synchronous motors and induction motors are presented along with several novel observer designs for electrical machines. Control strategies are developed using high-order, sliding-mode and quasi-continuous-sliding-mode techniques and two types of observer–controller schemes based on backstepping and sliding-mode techniques are described. Experimental results validate the performance of these observer and controller configurations with test trajectories of significance in difficult sensorless-AC-machine problems. Control engineers working with AC motors in a variety of industrial environments will find the space-and-cost-saving ideas detailed in Sensorless AC Electric Motor Control of much interest. Academic researchers and graduate students from electrical, mechanical and control-engineering backgrounds will be able to see how advanced theoretical control can be applied in meaningful real systems.

Download or read book Permanent Magnet Reluctance Self Synchronous Motors written by Syed A. Nasar and published by Springer. This book was released on 1993-03-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent Magnet, Reluctance, and Self-Synchronous Motors discusses the theory, design, and control of permanent magnet materials. The book describes permanent magnets and their applications to electric machines as well as their performance characteristics and limitations. It presents the performance and calculations of PM commutator motors and an approach to their design. Permanent magnet synchronous motors, finite-element calculations, design methodologies, and rectangular and sinusoidal current control are discussed. It presents reluctance motors, their topologies and performance analyses as well as reluctance synchronous motors, with very large rotor saliency ratios, and their vector control. Numerical examples and data of practical interest are provided throughout the book. The book will be very useful to engineers involved in the design and manufacturing of permanent magnet and reluctance motors and high-performance drives, as well as electrical engineering students and educators.

Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.