Download or read book Control of Machines written by S. K. Bhattacharya and published by New Age International. This book was released on 2006-12 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Machines is one of the most important functional areas for electrical and mechanical engineers working in industry. In this era of automation and control, every engineer has to acquaint himself on the design installation, and maintenance of control systems. This subject must find its place as a compulsory applied engineering subject in degree and diploma curriculum.Some progressive states and autonomous institutions have already introduced this subject in their curriculum. In this book, static control and programmable controllers have been included keeping in view the latest developments in modern industry. Relay and static control have been dealt with in details. Most of the control circuits included in this book have been taken from Indian industry. A chapter has been devoted to protection of motors and troubleshooting in control circuits.The chapter on PLC has been made very elaborate to deal with all aspects of logic controllers. Review questions have been included at the end of each chapter. The explanations of circuits and design procedure of control circuits have been made very simple to help students understand easily. Students, teachers and shop floor and design office engineers will find this book a very useful companion.
Download or read book Control of Machines with Friction written by Brian Armstrong-Hélouvry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is my ambition in writing this book to bring tribology to the study of control of machines with friction. Tribology, from the greek for study of rubbing, is the discipline that concerns itself with friction, wear and lubrication. Tribology spans a great range of disciplines, from surface physics to lubrication chemistry and engineering, and comprises investigators in diverse specialities. The English language tribology literature now grows at a rate of some 700 articles per year. But for all of this activity, in the three years that I have been concerned with the control of machines with friction, I have but once met a fellow controls engineer who was aware that the field existed, this including many who were concerned with friction. In this vein I must confess that, before undertaking these investigations, I too was unaware that an active discipline of friction existed. The experience stands out as a mark of the specialization of our time. Within tribology, experimental and theoretical understanding of friction in lubricated machines is well developed. The controls engineer's interest is in dynamics, which is not the central interest of the tribologist. The tribologist is more often concerned with wear, with respect to which there has been enormous progress - witness the many mechanisms which we buy today that are lubricated once only, and that at the factory. Though a secondary interest, frictional dynamics are note forgotten by tribology.
Download or read book Dynamics and Control of Machines written by V.K. Astashev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic models and concepts of machine dynamics and motion control are presented in the order of the principal steps of machine design. The machine is treated as a coupled dynamical system, including drive, mechanisms and controller, to reveal its behavior at different regimes through the interaction of its units under dynamic and processing loads. The main dynamic effects in machines are explained. The influence of component compliances on accuracy, stability and efficiency of the machines is analyzed. Methods for decreasing internal and external vibration activity of machines are described. The dynamic features of digital control are considered. Special attention is given to machines with intense dynamic behavior: resonant and hand-held percussion ones. Targeted to engineers as well as to lecturers and advanced students.
Download or read book Computer Control of Machines and Processes written by John G. Bollinger and published by Prentice Hall. This book was released on 1988 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Of Electrical Machines written by S K Bhattacharya and published by New Age International. This book was released on with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Control of Electric Machines written by Rubén Molina Llorente and published by Springer Nature. This book was released on 2020-03-20 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents deep analysis of machine control for different applications, focusing on its implementation in embedded systems. Necessary peripherals for various microcontroller families are analysed for machine control and software architecture patterns for high-quality software development processes in motor control units are described. Abundant figures help the reader to understand the theoretical, simulation and practical implementation stages of machine control. Model-based design, used as a mathematical and visual approach to construction of complex control algorithms, code generation that eliminates hand-coding errors, and co-simulation tools such as Simulink, PSIM and finite element analysis are discussed. The simulation and verification tools refine, and retest the models without having to resort to prototype construction. The book shows how a voltage source inverter can be designed with tricks, protection elements, and space vector modulation. Practical Control of Electric Machines: Model-Based Design and Simulation is based on the author’s experience of a wide variety of systems in domestic, automotive and industrial environments, and most examples have implemented and verified controls. The text is ideal for readers looking for an insight into how electric machines play an important role in most real-life applications of control. Practitioners and students preparing for a career in control design applied in electric machines will benefit from the book’s easily understood theoretical approach to complex machine control. The book contains mathematics appropriate to various levels of experience, from the student to the academic and the experienced professional. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.
Download or read book Control of Electric Machine Drive Systems written by Seung-Ki Sul and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to sensorless control and regulator design of electric drives Based on the author's vast industry experience and collaborative works with other industries, Control of Electric Machine Drive Systems is packed with tested, implemented, and verified ideas that engineers can apply to everyday problems in the field. Originally published in Korean as a textbook, this highly practical updated version features the latest information on the control of electric machines and apparatus, as well as a new chapter on sensorless control of AC machines, a topic not covered in any other publication. The book begins by explaining the features of the electric drive system and trends of development in related technologies, as well as the basic structure and operation principles of the electric machine. It also addresses steady state characteristics and control of the machines and the transformation of physical variables of AC machines using reference frame theory in order to provide a proper foundation for the material. The heart of the book reviews several control algorithms of electric machines and power converters, explaining active damping and how to regulate current, speed, and position in a feedback manner. Seung-Ki Sul introduces tricks to enhance the control performance of the electric machines, and the algorithm to detect the phase angle of an AC source and to control DC link voltages of power converters. Topics also covered are: Vector control Control algorithms for position/speed sensorless drive of AC machines Methods for identifying the parameters of electric machines and power converters The matrix algebra to model a three-phase AC machine in d-q-n axes Every chapter features exercise problems drawn from actual industry experience. The book also includes more than 300 figures and offers access to an FTP site, which provides MATLAB programs for selected problems. The book's practicality and realworld relatability make it an invaluable resource for professionals and engineers involved in the research and development of electric machine drive business, industrial drive designers, and senior undergraduate and graduate students. To obtain instructor materials please send an email to [email protected] To visit this book's FTP site to download MATLAB codes, please click on this link: ftp://ftp.wiley.com/public/sci_tech_med/electric_machine/ MATLAB codes are also downloadable from Wiley Booksupport Site at http://booksupport.wiley.com
Download or read book Out of Control written by Kevin Kelly and published by . This book was released on 1995 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: A synthesis of research and theory, this work chronicles the dawn of a new era in which the adaptability and autonomy of living organisms becomes the model for human made systems and machines. The author combines ideas from the Choas Theory, cybernetics, current thinking on evolution and research into computerized artificial life with his own experience of on-line culture to show that industrial culture is now obsolete. This book presents the prospects of imminent revolution as Kelly identifies new frontiers of thinking about biological systems that will change the way the natural world is percieved.
Download or read book Electronic Control of Switched Reluctance Machines written by TJE Miller and published by Elsevier. This book was released on 2001-05-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switched reluctance motors have steadily increased in commercial importance since their introduction in the early 1980's, while their technology - especially of their electronic control - has made great progress. Their unique characteristics introduce a delicate balance, in which the copper and iron are diminished in quantity, complexity and cost, in favour of a greater reliance on sophistication in the controller. Thus mastery of the control is the key challenge in the application of these machines. This book is intended for engineer's in industry and in the large research community in electrical machines and drives. It introduces the techniques for controlling switched reluctance machines, starting from first principles and building up to the most advanced forms of sensorless control. It covers the recent advances in electronic control and includes aspects of motion control, automation, acoustic noise reduction and energy efficiency. Covers the recent changes in control technology Includes up-to-date equipment and methods Contains applications and case studies
Download or read book Control Methods for Electrical Machines written by Rene Husson and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The type of control system used for electrical machines depends on the use (nature of the load, operating states, etc.) to which the machine will be put. The precise type of use determines the control laws which apply. Mechanics are also very important, because they affect performance. Another factor of essential importance in industrial applications is operating safety. Finally, the problem of how to control a number of different machines, whose interactions and outputs must be coordinated, is addressed and solutions are presented. These and other issues are addressed here by a range of expert contributors, each of whom are specialists in their particular field. This book is primarily aimed at those involved in complex systems design, but engineers in a range of related fields such as electrical engineering, instrumentation and control, and industrial engineering, will also find this a useful source of information.
Download or read book Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2021-10-07 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition extensively covers advanced issues/subjects in electric machines, starting from principles, to applications and case studies with ample graphical (numerical) results. This textbook is intended for second (and third) semester courses covering topics such as modeling of transients, control principles, electromagnetic and thermal finite element analysis, and optimal design (dimensioning). Notable recent knowledge with strong industrialization potential has been added to this edition, such as: Orthogonal models of multiphase a.c. machines Thermal Finite Element Analysis of (FEA) electric machines FEA–based–only optimal design of a PM motor case study Line start synchronizing premium efficiency PM induction machines Induction machines (three and single phase), synchronous machines with DC excitation, with PM-excitation, and with magnetically salient rotor and a linear Pm oscillatory motor are all investigated in terms of transients, electromagnetic FEM analysis and control principles. Case studies, numerical examples, and lots of discussion of FEM results for PMSM and IM are included throughout the book. The optimal design is treated in detail using Hooke–Jeeves and GA algorithms with case comparison studies in dedicated chapters for IM and PMSM. Numerous computer simulation programs in MATLAB® and Simulink® are available online that illustrate performance characteristics present in the chapters, and the FEM and optimal design case studies (and codes) may be used as homework to facilitate a deeper understanding of fundamental issues.
Download or read book Electric Machines and Drives written by Shaahin Filizadeh and published by CRC Press. This book was released on 2013-02-20 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric machines have a ubiquitous presence in our modern daily lives, from the generators that supply electricity to motors of all sizes that power countless applications. Providing a balanced treatment of the subject, Electric Machines and Drives: Principles, Control, Modeling, and Simulation takes a ground-up approach that emphasizes fundamental principles. The author carefully deploys physical insight, mathematical rigor, and computer simulation to clearly and effectively present electric machines and drive systems. Detailing the fundamental principles that govern electric machines and drives systems, this book: Describes the laws of induction and interaction and demonstrates their fundamental roles with numerous examples Explores dc machines and their principles of operation Discusses a simple dynamic model used to develop speed and torque control strategies Presents modeling, steady state based drives, and high-performance drives for induction machines, highlighting the underlying physics of the machine Includes coverage of modeling and high performance control of permanent magnet synchronous machines Highlights the elements of power electronics used in electric drive systems Examines simulation-based optimal design and numerical simulation of dynamical systems Suitable for a one semester class at the senior undergraduate or a graduate level, the text supplies simulation cases that can be used as a base and can be supplemented through simulation assignments and small projects. It includes end-of-chapter problems designed to pick up on the points presented in chapters and develop them further or introduce additional aspects. The book provides an understanding of the fundamental laws of physics upon which electric machines operate, allowing students to master the mathematical skills that their modeling and analysis requires.
Download or read book Out Of Control written by Kevin Kelly and published by Basic Books. This book was released on 2009-04-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Out of Control chronicles the dawn of a new era in which the machines and systems that drive our economy are so complex and autonomous as to be indistinguishable from living things.
Download or read book Analysis of Electric Machinery and Drive Systems written by Paul C. Krause and published by John Wiley & Sons. This book was released on 2013-06-17 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, this volume goes a step further, introducing new material relevant to machine design along with numerous techniques for making the derivation of equations more direct and easy to use. Coverage includes: Completely new chapters on winding functions and machine design that add a significant dimension not found in any other text A new formulation of machine equations for improving analysis and modeling of machines coupled to power electronic circuits Simplified techniques throughout, from the derivation of torque equations and synchronous machine analysis to the analysis of unbalanced operation A unique generalized approach to machine parameters identification A first-rate resource for engineers wishing to master cutting-edge techniques for machine analysis, Analysis of Electric Machinery and Drive Systems is also a highly useful guide for students in the field.
Download or read book Reluctance Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2018-07-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric energy is arguably a key agent for our material prosperity. With the notable exception of photovoltaic generators, electric generators are exclusively used to produce electric energy from mechanical energy. More than 60% of all electric energy is used in electric motors for useful mechanical work in various industries. This book presents the modeling, performance, design, and control of reluctance synchronous and flux-modulation machines developed for higher efficiency and lower cost. It covers one- and three-phase reluctance synchronous motors in line-start applications and various reluctance flux-modulation motors in pulse width modulation converter-fed variable speed drives. FEATURES Presents basic and up-to-date knowledge about the topologies, modeling, performance, design, and control of reluctance synchronous machines. Includes information on recently introduced reluctance flux-modulation electric machines (switched- flux, flux-reversal, Vernier, transverse flux, claw pole, magnetic-geared dual-rotor, brushless doubly fed, etc.). Features numerous examples and case studies throughout. Provides a comprehensive overview of all reluctance electric machines.
Download or read book Life Cycle Management of Machines and Mechanisms written by Jörg Niemann and published by Springer Nature. This book was released on 2020-08-20 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the description of machines and systems as investments goods in production. These machines have a technological and economical life cycle over the time used. By explaining the paradigms of life cycle management, the book describes how the life cycle of such investment goods can be designed, operated and optimized to deliver maximum benefit in industrial environment. Additional examples from industry including case studies and calculations demonstrate practical applications and deliver benefit not only for academic or educational purpose but also for industrial practitioners.
