Download or read book Polymer Process Engineering written by R. Griskey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are ubiquitous and pervasive in industry, science, and technology. These giant molecules have great significance not only in terms of products such as plastics, films, elastomers, fibers, adhesives, and coatings but also less ob viously though none the less importantly in many leading industries (aerospace, electronics, automotive, biomedical, etc.). Well over half the chemists and chem ical engineers who graduate in the United States will at some time work in the polymer industries. If the professionals working with polymers in the other in dustries are taken into account, the overall number swells to a much greater total. It is obvious that knowledge and understanding of polymers is essential for any engineer or scientist whose professional activities involve them with these macromolecules. Not too long ago, formal education relating to polymers was very limited, indeed, almost nonexistent. Speaking from a personal viewpoint, I can recall my first job after completing my Ph.D. The job with E.I. Du Pont de Nemours dealt with polymers, an area in which I had no university training. There were no courses in polymers offered at my alma mater. My experience, incidentally, was the rule and not the exception.

Download or read book Modern Aspects of Small Angle Scattering written by H. Brumberger and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Como, Italy, May 12--22, 1993

Download or read book Chemical Physics of Intercalation written by A.P. Legrand and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conjugated polymers suoh as polyaoetylene (CH)x polyphenylene (C6H4)x' poly thiophene (C4H2S)x' etc., which are insulators in their pristine state, can be brought to the metallic state after "doping" with ohemioal speoies whioh oan be either eleotron donors or I aoceptors. . This doping prooess involves a oharge transfer between the dopant moleoule and the polymer ohain whioh are then supposed to be spatially olose to each other. It follows that the meohanism of doping must be oonsidered as an aotual interoalation process, which will greatly affeot the struotural oharacteristios of the starting material, as well as its morphology, as has been observed during the 2 intercalation of graphite and layered compounds . In parallel with these modifioations, the band struoture of the system changes yielding a new set of eleotronio properties. It is evident therefore that the struotural and eleotronio properties are intimately related, and must be studied simultaneously in the same system to give reliable information. A great number of studies have been devoted to the structural and electronic properties of conjugated polymers after a chemical or 2 electrochemical doping process . Most of these concern the properties of the system for a given dopant concentration. With this approach a universal pioture of the polymer/dopant system is very diffioult to obtain, as a comparison between different experiments is very hazardous. On the other hand, only a small number of measurements have been performed during the continuous electroohemioal doping of various polymers.

Download or read book New Trends in Fluorescence Spectroscopy written by Bernard Valeur and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume in the new Springer Series on Fluorescence brings together fundamental and applied research from this highly interdisciplinary and field, ranging from chemistry and physics to biology and medicine. Special attention is given to supramolecular systems, sensor applications, confocal microscopy and protein-protein interactions. This carefully edited collection of articles is an invaluable tool for practitioners and novices.

Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.

Download or read book Infrared Spectroscopy in Conservation Science written by Michele R. Derrick and published by Getty Publications. This book was released on 2000-03-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical information on the use of infrared (IR) spectroscopy for the analysis of materials found in cultural objects. Designed for scientists and students in the fields of archaeology, art conservation, microscopy, forensics, chemistry, and optics, the book discusses techniques for examining the microscopic amounts of complex, aged components in objects such as paintings, sculptures, and archaeological fragments. Chapters include the history of infrared spectroscopy, the basic parameters of infrared absorption theory, IR instrumentation, analysis methods, sample collection and preparation, and spectra interpretation. The authors cite several case studies, such as examinations of Chumash Indian paints and the Dead Sea Scrolls. The Institute’s Tools for Conservation series provides practical scientific procedures and methodologies for the practice of conservation. The series is specifically directed to conservation scientists, conservators, and technical experts in related fields.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Characterization of Solid Surfaces written by Philip F. Kane and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until comparatively recently, trace analysis techniques were in general directed toward the determination of impurities in bulk materials. Methods were developed for very high relative sensitivity, and the values determined were average values. Sampling procedures were devised which eliminated the so-called sampling error. However, in the last decade or so, a number of developments have shown that, for many purposes, the distribution of defects within a material can confer important new properties on the material. Perhaps the most striking example of this is given by semiconductors; a whole new industry has emerged in barely twenty years based entirely on the controlled distribu tion of defects within what a few years before would have been regarded as a pure, homogeneous crystal. Other examples exist in biochemistry, metallurgy, polyiners and, of course, catalysis. In addition to this of the importance of distribution, there has also been a recognition growing awareness that physical defects are as important as chemical defects. (We are, of course, using the word defect to imply some dis continuity in the material, and not in any derogatory sense. ) This broadening of the field of interest led the Materials Advisory Board( I} to recommend a new definition for the discipline, "Materials Character ization," to encompass this wider concept of the determination of the structure and composition of materials. In characterizing a material, perhaps the most important special area of interest is the surface.

Download or read book Spectroscopy written by B. Straughan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is fifteen years since Walker and Straw wrote the first edition of 'Spectroscopy' and considerable developments have taken place during that time in all fields of this expanding subject. In atomic spectroscopy, for example, where the principles required in a student text have been laid down for many years, there have been advances in optical pumping and double resonance which cannot be neglected at undergraduate level. In addition, nuclear quadrupole resonance (n.q.f.) and far infrared spectroscopy now merit separate chapters while addtional chapters dealing with Mbssbauer spectroscopy, photoelectron spectroscopy and group theory are an essential requisite for any modern spectroscopy textbook. When the idea for a new edition of Spectroscopy was first discussed it quickly became clear that the task of revision would be an impossible one for two authors working alone. Consequently it was decided that the new edition be planned and co-ordinated by two editors who were to invite specialists, each of whom had experience of presenting their subject at an undergraduate level, to contribute a new chapter or to revise extensively an existing chapter. In this manner a proper perspective of each topic has been provided without any sacri fice of the essential character and unity of the first edition. The expansion of subject matter has necessitated the division of the complete work into three self contained volumes. Volume I includes atomic, n.m.f., n.q.f., e.s.r. and Mbssbauer spectroscopy.

Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Advanced Green Composites written by Anil N. Netravali and published by John Wiley & Sons. This book was released on 2018-10-04 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most composites, particularly those made using thermoset resins, cannot be recycled or reused. As a result, most of them end up in landfills at the end of their useful life which is neither sustainable nor environment-friendly. Various laws enacted by Governments around the world and heightened global awareness about sustainability and global warming is changing this situation. Significant research is being conducted in developing and utilizing sustainable fibers and resins, mostly derived from plant, to fabricate 'Green' composites. The significant progress in the past 20 or so years in this field has led to the development of green composites with high strength or so called Advanced Green Composites. More interestingly, green composites have also acquired various different properties such as fire resistance, transparency, barrier to gases and others. The term 'advanced' which only included high strength and stiffness now includes all these special properties. The world is on the cusp of a major change, and once fully developed, such composites could be used in applications ranging from automobiles to sporting goods, from circuit boards to housing and from furniture to packaging. This book, by presenting the state-of-the-art developments in many aspects of advanced green composites adds significantly to the knowledge base that is critical for their success of expanding their use in applications never seen before. The chapters are written by world’s leading researchers and present in-depth information in a simple way. This provides readers and researchers the latest developments in the field of 'Green' resins (with ways of strengthening them), High Strength Green Fibers (including micro and nano-cellulose fibrils/fibers) and Green Composites in the first few chapters. The introductory chapter summarizes the consequences of using conventional, petroleum-based materials and the need for green composites as well as the progress being made in this field. After that the book delves in to Advanced Green Composites in a broader sense and includes chapters on High Strength Green Composites, Self-healing Green Composites, Transparent Green Composites, All-cellulose composites, Toughened Green Composites, Green Biofoams, Bioinspired Shape Memory Composites, etc. The chapters are written by the experts who are highly respected in their fields.

Download or read book The Radiation Chemistry of Polysaccharides written by International Atomic Energy Agency and published by . This book was released on 2017-05 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides the background and compiles the most recent research findings as well as detailing development activities relating to the development of radiation processed products made of natural polymers. Successes clearly indicate that the radiation processing of natural polymers has emerged as an exciting area where the unique characteristics of these polymeric materials can be exploited for a variety of practical applications in agriculture, healthcare, industry and the environment.

Download or read book Contribution to the Physics of Cellulose Fibres written by Petrus Hendrik Hermans and published by . This book was released on 1946 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: General theoretical background of the research. Survey of the fibre material used. Studies in sorption. Studies in density. Studies in refractive power and double refraction. X-ray studies on orientation.

Download or read book Mechanical and Thermophysical Properties of Polymer Liquid Crystals written by Witold Brostow and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: may never overcome the effects of hysteresis and stress (see Chapters 6 and 12). The first sentence of the reference work, Handbook of Liquid Crystals, reads: The terms liquid crystals, crystalline liquid, mesophase, and mesomorphous state are used synonymously to describe a state of aggregation that exhibits a molecular order in a size range similar to that of a crystal but acts more or less as a viscous liquid: [2] In other words, molecules within a liquid crystalline phase possess some orientational order and lack positional order; furthermore, the shape of a liquid crystalline sample is determined by the vessel in which it is contained rather than by the orientational order of its aggregated molecules. The authors recognized the limitations and imprecision of this definition but, like others preceding them, could not devise a simple and generally applicable one that is better. Regardless, the terms 'liquid crystal' and 'mesophase' should not be used interchangeably. As mentioned above, all liquid crystals are mesophases, but all mesophases are not liquid crystals. Recent studies, employing elaborate and sophisticated analytical techniques, have permitted finer distinctions between classical crystals and mesophases. At the same time, they have made definitions like that from the Handbook of Liquid Crystals somewhat obsolete for reasons other than terminology. One part of the problem arises from the use of a combination of bulk properties (like flow) and microscopic properties (like molecular ordering) within the same definition.

Download or read book Basic Concepts for Simple and Complex Liquids written by Jean-Louis Barrat and published by Cambridge University Press. This book was released on 2003-03-27 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a unified approach, this book focusses on the concepts and theoretical methods that are necessary for an understanding of the physics and chemistry of the fluid state. The authors do not attempt to cover the whole field in an encyclopedic manner. Instead, important ideas are presented in a concise and rigorous style, and illustrated with examples from both simple molecular liquids and more complex soft condensed matter systems such as polymers, colloids, and liquid crystals.