Download or read book Contactless System for Measurement and Evaluation of Machined Surfaces written by Juraj Ružbarský and published by Springer Nature. This book was released on 2022-07-20 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a contactless system for the measurement and evaluation of selected characteristics of machined surfaces. It describes the design and construction of new equipment designed for contactless characterization of surface geometry working based on laser profilometry by triangulation principle. The book focuses on the quality assessment of surfaces produced by the technology of abrasive waterjet cutting (AWJ) and by laser. The author analyses the performed experiment of measurement of machined surfaces of samples of aluminum, stainless steel, and constructional steel using the contactless method with the LPM system and contact method using Mitutoyo SJ 400 surface roughness tester.
Download or read book Contactless System for Measurement and Evaluation of Machined Surfaces written by Juraj Ružbarský and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a contactless system for the measurement and evaluation of selected characteristics of machined surfaces. It describes the design and construction of new equipment designed for contactless characterization of surface geometry working based on laser profilometry by triangulation principle. The book focuses on the quality assessment of surfaces produced by the technology of abrasive waterjet cutting (AWJ) and by laser. The author analyses the performed experiment of measurement of machined surfaces of samples of aluminum, stainless steel, and constructional steel using the contactless method with the LPM system and contact method using Mitutoyo SJ 400 surface roughness tester.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1965 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Learning and IoT Applications for Health Informatics written by Pijush Samui and published by CRC Press. This book was released on 2024-10-31 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together leading experts from around the world to explore the transformative potential of Machine Learning (ML) and the Internet of Things (IoT) in healthcare. It provides a platform for studying a future where healthcare becomes more precise, personalized, and accessible for all. The book covers recent advancements that will shape the future of healthcare and how artificial intelligence is revolutionizing disease detection, from analyzing chest X-rays for pneumonia to solving the secrets of our genes. It investigates the transformative potential of smart devices, real-time analysis of heart data, and personalized treatment plan creation. It shows how ML and IoT work and presents real-world examples of how they are leading to earlier and more accurate diagnoses and personalized treatments. Therefore, this edited book will be an invaluable resource for researchers, healthcare professionals, data scientists, or simply someone passionate about the future of healthcare. Readers will discover the exciting possibilities that lie ahead at the crossroads of ML, IoT, and health informatics.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Micro Metal Forming written by Frank Vollertsen and published by Springer Nature. This book was released on 2019-09-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.
Download or read book Validation of Numerical Simulations by Digital Scanning of 3D Sheet Metal Objects written by Samir Lemeš and published by Univerza v Ljubljani, Fakulteta za strojništvo. This book was released on 2010-06-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation is the subjective process that determines the accuracy with which the mathematical model describes the actual physical phenomenon. This research was conducted in order to validate the use of finite element analysis for springback compensation in 3D scanning of sheet metal objects. The measurement uncertainty analysis was used to compare the digitized 3D model of deformed sheet metal product with the 3D model obtained by simulated deformation. The influence factors onto 3D scanning and numerical simulation processes are identified and analysed. It is shown that major contribution to measurement uncertainty comes from scanning method and deviations of parts due to manufacturing technology. The analysis results showed that numerical methods, such as finite element method, can successfully be used in computer aided quality control and automated inspection of manufactured parts.
Download or read book Polymeric Systems as Antimicrobial or Antifouling Agents written by Antonella Piozzi and published by MDPI. This book was released on 2020-05-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase in the emergence of antibiotic-resistant bacterial strains, combined with a dwindling rate of discovery of novel antibiotic molecules, has created an alarming issue worldwide. Although the occurrence of resistance in microbes is a natural process, the overuse of antibiotics is known to increase the rate of resistance evolution. Under antibiotic treatment, susceptible bacteria inevitably die, while resistant microorganisms proliferate under reduced competition. Therefore, the out-of-control use of antibiotics eliminates drug-susceptible species that would naturally limit the expansion of resistant species. In addition, the ability of many microbial species to grow as a biofilm has further complicated the treatment of infections with conventional antibiotics. A number of corrective measures are currently being explored to reverse or slow antibiotic resistance evolution, Among which one of the most promising solutions is the development of polymer-based antimicrobial compounds. In this Special Issue, different polymer systems able to prevent or treat biofilm formation, including cationic polymers, antibacterial peptide-mimetic polymers, polymers or composites able to load and release bioactive molecules, and antifouling polymers able to repel microbes by physical or chemical mechanisms are reported. Their applications in the design and fabrication of medical devices, in food packaging, and as drug carriers is investigated.
Download or read book Tribology of Machine Elements written by Giuseppe Pintaude and published by BoD – Books on Demand. This book was released on 2022-06-28 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a branch of science that deals with machine elements and their friction, wear, and lubrication. Tribology of Machine Elements - Fundamentals and Applications presents the fundamentals of tribology, with chapters on its applications in engines, metal forming, seals, blasting, sintering, laser texture, biomaterials, and grinding.
Download or read book Proceedings of the CIRP Seminars on Manufacturing Systems fertigungssysteme syst mes de Fabrication written by and published by . This book was released on 1998 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Local Strain and Temperature Measurement written by J Ziebs and published by Woodhead Publishing. This book was released on 1999-03-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a symposium held in Berlin in March 1996, drawing together practical expertise in measurement techniques, with typical applications ranging from in situ measurements of strain and rotation on small specimens through notched specimens and single crystal up to turbine blade shaped samples and full scale component testing. The symposium also highlighted new techniques such as speckle interferometry and image analysis.
Download or read book Reliability and Risk Assessment in Engineering written by Vijay Kumar Gupta and published by Springer Nature. This book was released on 2020-05-08 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of articles on reliability and safety engineering presented during INCRS 2018. The articles cover a variety of topics such as big data analytics and their applications in reliability assessment and condition monitoring, health monitoring, management, diagnostics and prognostics of mechanical systems, design for reliability and optimization, and machine learning for industrial applications. A special aspect of this volume is the coverage of performance, failure and reliability issues in electrical distribution systems. This book will be a useful reference for graduate students, researchers and professionals working in the area of reliability assessment, condition monitoring and predictive maintenance.
Download or read book CIRP Annals written by International Institution for Production Engineering Research and published by . This book was released on 1994 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book New Industry 4 0 Advances in Industrial IoT and Visual Computing for Manufacturing Processes written by Luis Norberto López de Lacalle and published by MDPI. This book was released on 2020-03-18 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern factories are experiencing rapid digital transformation supported by emerging technologies, such as the Industrial Internet of things (IIOT), industrial big data and cloud technologies, deep learning and deep analytics, AI, intelligent robotics, cyber-physical systems and digital twins, complemented by visual computing (including new forms of artificial vision with machine learning, novel HMI, simulation, and visualization). This is evident in the global trend of Industry 4.0. The impact of these technologies is clear in the context of high-performance manufacturing. Important improvements can be achieved in productivity, systems reliability, quality verification, etc. Manufacturing processes, based on advanced mechanical principles, are enhanced by big data analytics on industrial sensor data. In current machine tools and systems, complex sensors gather useful data, which is captured, stored, and processed with edge, fog, or cloud computing. These processes improve with digital monitoring, visual data analytics, AI, and computer vision to achieve a more productive and reliable smart factory. New value chains are also emerging from these technological changes. This book addresses these topics, including contributions deployed in production, as well as general aspects of Industry 4.0.
