Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact Mechanics in Tribology written by I.G. Goryacheva and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is the science of friction, lubrication and wear of moving components. Results obtained from tribology are used to reduce energy losses in friction pro cesses, to reduce material losses due to wear, and to increase the service life of components. Contact Mechanics plays an important role in Tribology. Contact Mechanics studies the stress and strain states of bodies in contact; it is contact that leads to friction interaction and wear. This book investigates a variety of contact problems: discrete contact of rough surfaces, the effect of imperfect elasticity and mechanical inhomogeneity of contacting bodies, models of friction and wear, changes in contact characteristics during the wear process, etc. The results presented in this book were obtained during my work at the Insti tute for Problems in Mechanics of the Russian Academy of Sciences. The first steps of this research were carried out under the supervision of Professor L. A. Galin who taught me and showed me the beauty of scientific research and solutions. Some of the problems included in the book were investigated together with my col leagues Dr. M. N. Dobychin, Dr. O. G. Chekina, Dr. I. A. Soldatenkov, and Dr. E. V. Tor skaya from the Laboratory of Friction and Wear (IPM RAS) and Prof. F. Sadeghi from Purdue University (West Lafayette, USA). I would like to express my thanks to them. I am very grateful to Professor G. M. L.
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2018-07-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.
Download or read book Contact Mechanics friction written by and published by . This book was released on 2003 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The English edition of “Contact Mechanics and Friction” lying before you is, for st the most part, the text of the 1 German edition (Springer Publishing, 2009). The book was expanded by the addition of a chapter on frictional problems in ear- quake research. Additionally, Chapter 15 was supplemented by a section on elasto-hydrodynamics. The problem sections of several chapters were enriched by the addition of new examples. This book would not have been possible without the active support of J. Gray, who translated it from the German edition. I would like to thank Prof. G. G. - charyan and Prof. S. Sobolev for discussions and critical comments on the chapter over earthquake dynamics. Dr. R. Heise made significant contributions to the - velopment and correction of new problems. I would like to convey my affecti- ate thanks to Dr. J. Starcevic for her complete support during the composition of this book. I want to thank Ms. Ch. Koll for her patience in creating figures and Dr. R. Heise, M. Popov, M. Heß, S. Kürscher, and B. Grzemba for their help in pro- reading. Berlin, November 2009 V.L. Popov Preface to the German Edition
Download or read book Handbook of Contact Mechanics written by Valentin L. Popov and published by Springer. This book was released on 2019-04-26 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.
Download or read book Contact Mechanics written by K. L. Johnson and published by Cambridge University Press. This book was released on 1987-08-28 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This treatise is concerned with the stresses and deformation of solid bodies in contact with each other, along curved surfaces which touch initially at a point or along a line. Examples are a railway wheel and rail, or a pair of gear wheel teeth. Professor Johnson first reviews the development of the theory of contact stresses since the problem was originally addressed by H. Hertz in 1882. Next he discusses the influence of friction and the topographical roughness of surfaces, and this is incorporated into the theory of contact mechanics. An important feature is the treatment of bodies which deform plastically or viscoelastically. In addition to stationary contact, an appreciable section of the book is concerned with bodies which are in sliding or rolling contact, or which collide.
Download or read book Rough Surfaces written by T. R. Thomas and published by World Scientific Publishing Company. This book was released on 1999 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text addreseses the topic of surface roughness, how to measure and describe it, and what practical problems it might cause. Updated to include advances in measurement and characterization, this second edition introduces modern instruments, including laser interferometers and AFMs, and there are sections on fractals and motif analysis. Problems of 3D surface measurement and description are extensively treated. Manufacturing and production engineers, optical and QC engineers, tribologists and many other applied scientists should find this book useful.
Download or read book Discrete Contact Mechanics with Applications in Tribology written by Irina Goryacheva and published by Elsevier. This book was released on 2022-05-03 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Contact Mechanics with Applications in Tribology presents new solutions to contact problems for elastic and viscoelastic bodies in normal, sliding, and rolling contact, taking into account effects such as surface microgeometry, adhesion, fluid films, and viscous hysteresis in bulk material or surface layers. These solutions are applied to problems in tribology for modeling contact and friction of bodies with surface microgeometry (rough or textured). The book provides exact mathematical formulations for cases of discrete contact based on classical approaches of contact mechanics, allowing readers to study the influence of different parameters of surface microgeometry on contact characteristics and friction force.The book will help solve problems in modeling contact and friction interaction in cases of discrete character of contact interaction, mutual influence of individual contact spots in contact interaction of elastic and viscoelastic solids, calculating sliding and rolling friction forces as a result of adhesive and viscoelastic mechanisms of dissipation, and more. Provides a raft of solutions to contact problems for elastic and viscoelastic materials in normal, sliding, and rolling contact Provides solutions and formulations that consider surface microgeometry, adhesion, fluid films, viscous hysteresis in bulk material or surface layers, and other common material effects Features applied methods based on classical contact mechanics approaches, allowing for analytic and half-analytic treatment of problems
Download or read book Contact Mechanics written by J.R. Barber and published by Springer. This book was released on 2018-02-09 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the solution of contact problems with an emphasis on idealized (mainly linear) elastic problems that can be treated with elementary analytical methods. General physical and mathematical features of these solutions are highlighted. Topics covered include the contact of rough surfaces and problems involving adhesive (e.g. van der Waals) forces. The author is a well-known researcher in the subject with hands-on experience of the topics covered and a reputation for lucid explanations. The target readership for the book includes researchers who encounter contact problems but whose primary focus is not contact mechanics. Coverage is also suitable for a graduate course in contact mechanics and end-of-chapter problems are included.
Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford Graduate Texts. This book was released on 2019 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book explains how these tribological phenomena originate from atomistic and microscale physical phenomena and shows how this understanding can be used to solve macroscale tribology problems.
Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Download or read book Interfacial Mechanics written by Jane Wang and published by CRC Press. This book was released on 2019-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the characteristics of material contact and lubrication at tribological interfaces is of great importance to engineering researchers and machine designers. Traditionally, contact and lubrication are separately studied due to technical difficulties, although they often coexist in reality and they are actually on the same physical ground. Fast research advancements in recent years have enabled the development and application of unified models and numerical approaches to simulate contact and lubrication, merging their studies into the domain of Interfacial Mechanics. This book provides updated information based on recent research progresses in related areas, which includes new concepts, theories, methods, and results for contact and lubrication problems involving elastic or inelastic materials, homogeneous or inhomogeneous contacting bodies, using stochastic or deterministic models for dealing with rough surfaces. It also contains unified models and numerical methods for mixed lubrication studies, analyses of interfacial frictional and thermal behaviors, as well as theories for studying the effects of multiple fields on interfacial characteristics. The book intends to reflect the recent trends of research by focusing on numerical simulation and problem solving techniques for practical interfaces of engineered surfaces and materials. This book is written primarily for graduate and senior undergraduate students, engineers, and researchers in the fields of tribology, lubrication, surface engineering, materials science and engineering, and mechanical engineering.
Download or read book Fundamentals of Tribology written by Rahnejat Homer and published by World Scientific. This book was released on 1998-10-20 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings -- journal bearings, thrust bearings and externally pressurised bearings -- are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons. The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions. This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.
Download or read book Computational Contact Mechanics written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2008-04-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics of this book span the range from spatial and temporal discretization techniques for contact and impact problems with small and finite deformations over investigations on the reliability of micromechanical contact models over emerging techniques for rolling contact mechanics to homogenization methods and multi-scale approaches in contact problems.
Download or read book Numerical Methods in Contact Mechanics written by Vladislav A. Yastrebov and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational contact mechanics is a broad topic which brings together algorithmic, geometrical, optimization and numerical aspects for a robust, fast and accurate treatment of contact problems. This book covers all the basic ingredients of contact and computational contact mechanics: from efficient contact detection algorithms and classical optimization methods to new developments in contact kinematics and resolution schemes for both sequential and parallel computer architectures. The book is self-contained and intended for people working on the implementation and improvement of contact algorithms in a finite element software. Using a new tensor algebra, the authors introduce some original notions in contact kinematics and extend the classical formulation of contact elements. Some classical and new resolution methods for contact problems and associated ready-to-implement expressions are provided. Contents: 1. Introduction to Computational Contact. 2. Geometry in Contact Mechanics. 3. Contact Detection. 4. Formulation of Contact Problems. 5. Numerical Procedures. 6. Numerical Examples. About the Authors Vladislav A. Yastrebov is a postdoctoral-fellow in Computational Solid Mechanics at MINES ParisTech in France. His work in computational contact mechanics was recognized by the CSMA award and by the Prix Paul Caseau of the French Academy of Technology and Electricité de France.
Download or read book Surface Effects and Contact Mechanics including Tribology XII written by J.Th.M. De Hossen and published by WIT Press. This book was released on 2015-04-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.
