Download or read book Mechanics of Geomaterial Interfaces written by A.P.S. Selvadurai and published by Elsevier. This book was released on 1995-01-30 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of geomaterial interfaces recognizes the important influences of the interface behaviour on the performance of interfaces involving cementaceous materials such as concrete and steel, ice-structure interfaces, concrete-rock interfaces and interfaces encountered in soil reinforcement. During the past two decades, the subject of geomaterial interfaces has attracted the concerted attention of scientists and engineers both in geomechanics and applied mechanics. These efforts have been largely due to the observation that the conventional idealizations of the behaviour of interfaces between materials by frictionless contact, bonded contact, Coulomb friction or finite friction tend to omit many interesting and important influences of special relevance to geomaterials. The significant manner in which non-linear effects, dilatancy, contact degradation, hardening and softening, etc., can influence the behaviour of the interface is borne out by experimental evidence. As a result, in many instances, the response of the interface can be the governing criterion in the performance of a geomechanics problem.The primary objective of this volume is to provide a documentation of recent advances in the area of geomaterial interfaces. The volume consists of subject groupings which cover ice-structure, soil-structure and steel-concrete interfaces, mechanics of rock and concrete joints and interfaces in discrete systems.

Download or read book Particles at Fluid Interfaces written by Erica Wanless and published by Frontiers Media SA. This book was released on 2019-05-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particles at Fluid Interfaces encompasses the processes and formulations that involve the stabilisation of fluid interfaces by adsorbed particles. The prevalence of these multiphase materials underpins their use in a broad range of industries from personal care and food technology to oil and mineral processing. The stabilisation conferred by the adsorbed particles can be transient as found in froth flotation or long-lived as occurs within Pickering Emulsions. The particles can range in size from nanoparticles to millimetre-sized particles, and cover a spectrum from collapsed proteins, polymeric colloids of controlled size and shape to high dispersity mineral particles.

Download or read book Interfaces and Interface Conditions written by Andreas Späth and published by Walter de Gruyter. This book was released on 2012-02-14 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains articles that focus on the interface between linguistic and conceptual knowledge. The issues addressed in the volume include the preconditions of every level of the language system that are required for the transformation of linguistic information into conceptual representations. In accordance with Chomsky’s Minimalist language model, the language system is embedded into the performative systems where language is a part of the cognitive competence of human beings, i.e. system of articulation and perception (A/P) and the conceptual-intentional system (C/I). During the formation of linguistic structures, every performative system obtains well-formed representations as its input information. The articles of the volume show how interface conditions determine the linguistic representations on each level of the linguistic system. Interface conditions result in requirements for the ordering of linguistic elements. The syntactic transformation achieves a point, where the linguistic structure formation branches to two distinct representational levels. Both levels deliver instructions for the systems of performance A/P and C/I. Linearization takes place on the syntactic surface of a sentence. The linearization of linguistic elements is manifest at the derivational point of Spell-out and also on the level of the phonological form (PF). This means that on the one hand, linearization is relevant to the phonetic aspect of linguistic expressions, and on the other hand, the interpretation of linguistic utterances is based on hierarchical structures. On the level of Logical Form (LF) all operations apply which don’t have any influence on the linear order in overt syntax. In addition they affect the generation of hierarchical structures. The structure obtained on LF is the representational format of the semantic form of a sentence.

Download or read book American Environmentalism written by J. Michael Martinez and published by CRC Press. This book was released on 2013-06-20 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting the natural environment and promoting sustainability have become important objectives, but achieving such goals presents myriad challenges for even the most committed environmentalist. American Environmentalism: Philosophy, History, and Public Policy examines whether competing interests can be reconciled while developing consistent, coherent, effective public policy to regulate uses and protection of the natural environment without destroying the national economy. It then reviews a range of possible solutions. The book delves into key normative concepts that undergird American perspectives on nature by providing an overview of philosophical concepts found in the western intellectual tradition, the presuppositions inherent in neoclassical economics, and anthropocentric (human-centered) and biocentric (earth-centered) positions on sustainability. It traces the evolution of attitudes about nature from the time of the Ancient Greeks through Europeans in the Middle Ages and the Renaissance, the Enlightenment and the American Founders, the nineteenth and twentieth centuries, and up to the present. Building on this foundation, the author examines the political landscape as non-governmental organizations (NGOs), industry leaders, and government officials struggle to balance industrial development with environmental concerns. Outrageous claims, silly misrepresentations, bogus arguments, absurd contentions, and overblown prophesies of impending calamities are bandied about by many parties on all sides of the debate—industry spokespeople, elected representatives, unelected regulators, concerned citizens, and environmental NGOs alike. In lieu of descending into this morass, the author circumvents the silliness to explore the crucial issues through a more focused, disciplined approach. Rather than engage in acrimonious debate over minutiae, as so often occurs in the context of "green" claims, he recasts the issue in a way that provides a cohesive look at all sides. This effort may be quixotic, but how else to cut the Gordian knot?

Download or read book Moving Interfaces in Crystalline Solids written by Franz D. Fischer and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moving Interfaces in Solids are typically phase boundaries and grain or subgrain boundaries. Continuum thermodynamics and continuum mechanics are applied to explain the motion process. Related numerical and experimental concepts are dealt with. Experts from material physics and mechanics bridge the gap between these fields. The reader is offered a common view of interface mtion in a unique representation. Examples are presented for various material systems.

Download or read book Innovations in Wave Processes Modelling and Decision Making written by Alena V. Favorskaya and published by Springer. This book was released on 2018-02-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents methods for full-wave computer simulation that can be used in various applications and contexts, e.g. seismic prospecting, earthquake stability, global seismic patterns on Earth and Mars, medicine, traumatology, ultrasound investigation of the human body, ultrasound and laser operations, ultrasonic non-destructive railway testing, modelling aircraft composites, modelling composite material delamination, etc. The key innovation of this approach is the ability to study spatial dynamical wave processes, which is made possible by cutting-edge numerical finite-difference grid-characteristic methods. The book will benefit all students, researchers, practitioners and professors interested in numerical mathematics, computer science, computer simulation, high-performance computer systems, unstructured meshes, interpolation, seismic prospecting, geophysics, medicine, non-destructive testing and composite materials.

Download or read book Journal of Rehabilitation Research and Development written by and published by . This book was released on 1998 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Rehabilitation Research Development written by and published by . This book was released on 1998 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Rehabilitation R D written by and published by . This book was released on 1998 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Thermal Stress Analysis of Smart Materials and Structures written by Zengtao Chen and published by Springer Nature. This book was released on 2019-09-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first single volume monograph that systematically summarizes the recent progress in using non-Fourier heat conduction theories to deal with the multiphysical behaviour of smart materials and structures. The book contains six chapters and starts with a brief introduction to Fourier and non-Fourier heat conduction theories. Non-Fourier heat conduction theories include Cattaneo-Vernotte, dual-phase-lag (DPL), three-phase-lag (TPL), fractional phase-lag, and nonlocal phase-lag heat theories. Then, the fundamentals of thermal wave characteristics are introduced through reviewing the methods for solving non-Fourier heat conduction theories and by presenting transient heat transport in representative homogeneous and advanced heterogeneous materials. The book provides the fundamentals of smart materials and structures, including the background, application, and governing equations. In particular, functionally-graded smart structures made of piezoelectric, piezomagnetic, and magnetoelectroelastic materials are introduced as they represent the recent development in the industry. A series of uncoupled thermal stress analyses on one-dimensional structures are also included. The volume ends with coupled thermal stress analyses of one-dimensional homogenous and heterogeneous smart piezoelectric structures considering different coupled thermopiezoelectric theories. Last but not least, fracture behavior of smart structures under thermal disturbance is investigated and the authors propose directions for future research on the topic of multiphysical analysis of smart materials.

Download or read book IUTAM Symposium on Advances in Micro and Nanofluidics written by Marco Ellero and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nano-fluidics concerns fluid dynamics occurring in devices or flow configurations with minimum design length measured in micrometers or smaller. The behavior of fluids at these scales is quite different from that at the macroscopic level due to the presence of surface tension effects, wetting phenomena, Brownian diffusion and hydrodynamic interactions with immersed particles and microstructures. These effects cannot be generally represented in a classical homogeneous continuum framework. However, this triggers the development of new tools to investigate and simulate problems at the meso-scopic level. This book contains a collection of works presented at the IUTAM Symposium on Advances on Micro and Nano-fluidics held in Dresden in 2007. It covers several subjects of wide interest for micro and nano-fluidics applications focusing on both, analytical and numerical approaches. Topics covered in particular include multi-scale particle methods for numerical simulations, liquid-wall interactions and modeling approaches, modeling of immersed nano-scale structures, organized flow behavior at micro and nano-scales, and methods for control of micro- and nano-scale flows.

Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world

Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.

Download or read book Multiphysics Modeling Numerical Methods and Engineering Applications written by Qun Zhang and published by Elsevier. This book was released on 2015-12-15 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Modeling: Numerical Methods and Engineering Applications: Tsinghua University Press Computational Mechanics Series describes the basic principles and methods for multiphysics modeling, covering related areas of physics such as structure mechanics, fluid dynamics, heat transfer, electromagnetic field, and noise. The book provides the latest information on basic numerical methods, also considering coupled problems spanning fluid-solid interaction, thermal-stress coupling, fluid-solid-thermal coupling, electromagnetic solid thermal fluid coupling, and structure-noise coupling. Users will find a comprehensive book that covers background theory, algorithms, key technologies, and applications for each coupling method. - Presents a wealth of multiphysics modeling methods, issues, and worked examples in a single volume - Provides a go-to resource for coupling and multiphysics problems - Covers the multiphysics details not touched upon in broader numerical methods references, including load transfer between physics, element level strong coupling, and interface strong coupling, amongst others - Discusses practical applications throughout and tackles real-life multiphysics problems across areas such as automotive, aerospace, and biomedical engineering

Download or read book Modeling Methods for Process Induced Distortions of CFRP Parts produced in the Prepreg Autoclave Process written by Tim Frerich and published by Logos Verlag Berlin GmbH. This book was released on 2023-06-20 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process induced distortions are a challenge in the production of high-performance components made of carbon fiber reinforced plastics. In order to prevent the distortions, a prediction is of great utility. For components manufactured in the prepreg autoclave process, which is often used in the aerospace industry, prediction methods are investigated within this work. First, the state of the art is discussed and, based on this, two promising approaches are identified, which are further investigated and implemented: A rapid simulation approach and a complex one, which requires more effort but allows further investigations of the distortions. For the latter approach, new material models and rules of mixture are developed that take into account modern material architectures with interleaf layers. Using these material models, the observed material behavior can be represented more accurately than with material models from the literature. The results obtained by both approaches are compared with experimental results. A good agreement can be shown between the measurements and the simulation.

Download or read book Contact Problems in Elasticity written by N. Kikuchi and published by SIAM. This book was released on 1988-01-01 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contact of one deformable body with another lies at the heart of almost every mechanical structure. Here, in a comprehensive treatment, two of the field's leading researchers present a systematic approach to contact problems. Using variational formulations, Kikuchi and Oden derive a multitude of new results, both for classical problems and for nonlinear problems involving large deflections and buckling of thin plates with unilateral supports, dry friction with nonclassical laws, large elastic and elastoplastic deformations with frictional contact, dynamic contacts with dynamic frictional effects, and rolling contacts. This method exposes properties of solutions obscured by classical methods, and it provides a basis for the development of powerful numerical schemes.

Download or read book Nonlinear Dynamics Volume 1 written by Gaetan Kerschen and published by Springer. This book was released on 2018-06-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Dynamics, Volume 1: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, 2018, the first volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Nonlinear Dynamics, including papers on: Nonlinear System Identification Nonlinear Modeling & Simulation Nonlinear Reduced-order Modeling Nonlinearity in PracticeNonlinearity in Aerospace Systems Nonlinearity in Multi-Physics Systems Nonlinear Modes and Modal Interactions Experimental Nonlinear Dynamics