Download or read book Contact Adhesion and Rupture of Elastic Solids written by D. Maugis and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the analogy between contact mechanics and fracture mechanics proposed by the author twenty years ago, starts with a treatment of the surface energy and tension of solids and surface thermodynamics. The essential concepts of fracture mechanics are presented with emphasis on the thermodynamic aspects. Readers will find complete analytical results and detailed calculations for cracks submitted to pressure distributions and the Dugdale model. Contact mechanics and the contact and adherence of rough solids are also covered.
Download or read book Method of Dimensionality Reduction in Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2014-08-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for the first time a simulation method for the fast calculation of contact properties and friction between rough surfaces in a complete form. In contrast to existing simulation methods, the method of dimensionality reduction (MDR) is based on the exact mapping of various types of three-dimensional contact problems onto contacts of one-dimensional foundations. Within the confines of MDR, not only are three dimensional systems reduced to one-dimensional, but also the resulting degrees of freedom are independent from another. Therefore, MDR results in an enormous reduction of the development time for the numerical implementation of contact problems as well as the direct computation time and can ultimately assume a similar role in tribology as FEM has in structure mechanics or CFD methods, in hydrodynamics. Furthermore, it substantially simplifies analytical calculation and presents a sort of “pocket book edition” of the entirety contact mechanics. Measurements of the rheology of bodies in contact as well as their surface topography and adhesive properties are the inputs of the calculations. In particular, it is possible to capture the entire dynamics of a system – beginning with the macroscopic, dynamic contact calculation all the way down to the influence of roughness – in a single numerical simulation model. Accordingly, MDR allows for the unification of the methods of solving contact problems on different scales. The goals of this book are on the one hand, to prove the applicability and reliability of the method and on the other hand, to explain its extremely simple application to those interested.
Download or read book Indentation Testing of Biological Materials written by Ivan Argatov and published by Springer. This book was released on 2018-03-27 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive and unifying approach to analytical identification of material properties of biological materials. Focusing on depth-sensing indentation testing, pipette aspiration testing, and torsion of soft tissues, it discusses the following important aspects in detail: damping, adhesion, thickness effect, substrate effect, elastic inhomogeneity effect, and biphasic effect. This book is intended for advanced undergraduate and graduate students, researchers in the area of biomechanics as well as for biomedical engineers interested in contact problems and involved in inverse materials parameters prediction analysis.
Download or read book Contact Problems for Soft Biological and Bioinspired Materials written by Feodor M. Borodich and published by Springer Nature. This book was released on 2022-04-22 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions from leading researchers in biomechanics, nanomechanics, tribology, contact mechanics, materials science and applications on various experimental techniques including atomic force microscopy (AFM) for studying soft, biomimetic and biological materials and objects. Biologists, physicists, researchers applying methods of contact mechanics and researchers testing materials using indentation techniques along with many other applied scientists will find this book a useful addition to their libraries. Moreover, several reviews in this book are written as introductions to several important and rather sophisticated research areas such as depth-sensing indentation, studying of biological cells by AFM probes, mechanics of adhesive contact and contact between viscoelastic (hereditary elastic) solids. The book containing new theoretical models, results of experimental studies and numerical simulations, along with reviews of above mentioned areas of contact mechanics in application to biological systems, would be beneficial for researchers in many areas of biology, medicine, engineering, mechanics and biomimetics.
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2017-03-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.
Download or read book Mechanics of Hysteretic Adhesive Elastic Mechanical Contact Between Rough Surfaces written by Haneesh Kesari and published by Stanford University. This book was released on 2011 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In experiments that involve contact with adhesion between two surfaces, as found in atomic force microscopy or nanoindentation, two distinct contact force (P ) vs. indentation-depth (h) curves are often measured depending on whether the indenter moves towards or away from the sample. The origin of this hysteresis is not well understood and is often attributed to moisture, plasticity or viscoelasticity. We present experiments, atomistic simulations and continuum mechanics models that will show that hysteresis can exist without these effects, and that its magnitude depends on surface roughness. We explain the observed hysteresis as the result of a series of surface instabilities, where the contact area grows or recedes by a finite amount. We also demonstrate that when this is the case material properties can be estimated uniquely from contact experiments even when the measured P -h curves are not unique. The hysteresis energy loss during contact is also a measure of the adhesive toughness of the contact interface. We show experimentally that roughness can both increase and decrease the adhesive toughness of the contact interface. We show through numerical simulation of continuum adhesive contact models that the contact interface is optimally tough at conditions at which the contact region is at the cusp of the transition through which it turns form being mostly simply connected to being predominantly multiply connected.
Download or read book Handbook of Lubrication and Tribology written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental protection. This second edition provides a thorough treatment of established knowledge and practices, along with detailed references for further study. Written by the foremost experts in the field, the book is divided into four sections. The first reviews the basic principles of tribology, wear mechanisms, and modes of lubrication. The second section covers the full range of lubricants/coolants, including mineral oil, synthetic fluids, and water-based fluids. In the third section, the contributors describe many wear- and friction-reducing materials and treatments, which are currently the fastest growing areas of tribology, with announcements of new coatings, better performance, and new vendors being made every month. The final section presents components, equipment, and designs commonly found in tribological systems. It also examines specific industrial areas and their processes. Sponsored by the Society of Tribologists and Lubrication Engineers, this handbook incorporates up-to-date, peer-reviewed information for tackling tribological problems and improving lubricants and tribological systems. The book shows how the proper use of generally accepted tribological practices can save money, conserve energy, and protect the environment.
Download or read book Handbook of Lubrication and Tribology Volume II written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental pr
Download or read book Linear and Non Linear Deformations of Elastic Solids written by Arabinda Roy and published by CRC Press. This book was released on 2019-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear and Non-Linear Deformations of Elastic Solids aims to compile the advances in the field of linear and non-linear elasticity through discussion of advanced topics. Broadly classified into two parts, it includes crack, contact, scattering and wave propagation in linear elastic solids and bending vibration, stability in non-linear elastic solids supported by MATLAB examples. This book is aimed at graduate students and researchers in applied mathematics, solid mechanics, applied mechanics, structural mechanics and includes comprehensive discussion of related analytical/numerical methods.
Download or read book Engineering Biomaterials for Regenerative Medicine written by Sujata K. Bhatia and published by Springer Science & Business Media. This book was released on 2011-11-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regeneration of tissues and organs remains one of the great challenges of clinical medicine, and physicians are constantly seeking better methods for tissue repair and replacement. Tissue engineering and regenerative medicine have been investigated for virtually every organ system in the human body, and progress is made possible by advances in materials science, polymer chemistry, and molecular biology. This book reviews the current status of biomaterials for regenerative medicine, and highlights advances in both basic science and clinical practice. The latest methods for regulating the biological and chemical composition of biomaterials are described, together with techniques for modulating mechanical properties of engineered constructs. Contributors delineate methods for guiding the host response to implantable materials, and explain the use of biologically-inspired materials for optimal biological functionality and compatibility. The book culminates in a discussion of the clinical applications of regenerative medicine. By integrating engineering and clinical medicine, Engineering Biomaterials for Regenerative Medicine examines how tissue engineering and regenerative medicine can be translated into successful therapies to bridge the gap between laboratory and clinic. The book will aid materials scientists and engineers in identifying research priorities to fulfill clinical needs, and will also enable physicians to understand novel biomaterials that are emerging in the clinic. This integrated approach also gives engineering students a sense of the excitement and relevance of materials science in the development of novel therapeutic strategies.
Download or read book The Mechanics of Solids written by Michael H. Santare and published by Associated University Presse. This book was released on 2008 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring a biography and publications list of Arnold D Kerr, this work includes papers on various topics including contact mechanics, nondestructive evaluation of structures, ice mechanics, stability of structures, engineering of railway tracks and concrete pavements, sandwich structures, biomechanics and biomaterials, and applied mathematics.
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book Discrete Contact Mechanics with Applications in Tribology written by Irina Goryacheva and published by Elsevier. This book was released on 2022-05-03 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Contact Mechanics with Applications in Tribology presents new solutions to contact problems for elastic and viscoelastic bodies in normal, sliding, and rolling contact, taking into account effects such as surface microgeometry, adhesion, fluid films, and viscous hysteresis in bulk material or surface layers. These solutions are applied to problems in tribology for modeling contact and friction of bodies with surface microgeometry (rough or textured). The book provides exact mathematical formulations for cases of discrete contact based on classical approaches of contact mechanics, allowing readers to study the influence of different parameters of surface microgeometry on contact characteristics and friction force.The book will help solve problems in modeling contact and friction interaction in cases of discrete character of contact interaction, mutual influence of individual contact spots in contact interaction of elastic and viscoelastic solids, calculating sliding and rolling friction forces as a result of adhesive and viscoelastic mechanisms of dissipation, and more. Provides a raft of solutions to contact problems for elastic and viscoelastic materials in normal, sliding, and rolling contact Provides solutions and formulations that consider surface microgeometry, adhesion, fluid films, viscous hysteresis in bulk material or surface layers, and other common material effects Features applied methods based on classical contact mechanics approaches, allowing for analytic and half-analytic treatment of problems
Download or read book Adhesion of Cells Viruses and Nanoparticles written by Kevin Kendall and published by Springer Science & Business Media. This book was released on 2010-11-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Adhesion of Cells, Viruses and Nanoparticles" describes the adhesion of cells, viruses and nanoparticles starting from the basic principles of adhesion science, familiar to postgraduates, and leading on to recent research results. The underlying theory is that of van der Waals forces acting between cells and substrates, embodied in the molecules lying at the surfaces, together with the geometry and elasticity of the materials involved. The first part describes the fundamental background to adhesion principles, including the phenomenology, the important equations and the modeling ideas. Then the mechanisms of adhesion are explored in the second part, including the elastic deformations of spheres and the importance of the energy of adhesion as measured in various tests. It is demonstrated that adhesion of cells is statistical and depends on Brownian movement and on the complex multiple contacts that can form as cells move around. Then, detailed chapters on cell adhesion, contact of viruses and aggregation of nanoparticles follow in Part 3. Finally, the last chapter looks to the future understanding of cell adhesion and points out some interesting directions of research, development and treatment of diseases related to these phenomena. This book is an ideal resource for researchers on adhesion molecules, receptors, cell and tissue culturing, virus infection, toxicity of nanoparticles and bioreactor fouling. It can also be used to support undergraduate and Masters level teaching courses. "This is a fascinating book and it is an invaluable resource for understanding particle-particle/surface adhesion at micro- and nano- scales. I intend to keep one for my future reference and highly recommend it to my students." (Prof. Zhibing Zhang, School of Chemical Engineering, University of Birmingham, UK)
Download or read book Atomic Force Microscopy written by Greg Haugstad and published by John Wiley & Sons. This book was released on 2012-09-04 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enlightens readers on the basic surface properties and distance-dependent intersurface forces one must understand to obtain even simple data from an atomic force microscope (AFM). The material becomes progressively more complex throughout the book, explaining details of calibration, physical origin of artifacts, and signal/noise limitations. Coverage spans imaging, materials property characterization, in-liquid interfacial analysis, tribology, and electromagnetic interactions. “Supplementary material for this book can be found by entering ISBN 9780470638828 on booksupport.wiley.com”
Download or read book Analysis and Approximation of Contact Problems with Adhesion or Damage written by Mircea Sofonea and published by CRC Press. This book was released on 2005-09-26 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into contact problems continues to produce a rapidly growing body of knowledge. Recognizing the need for a single, concise source of information on models and analysis of contact problems, accomplished experts Sofonea, Han, and Shillor carefully selected several models and thoroughly study them in Analysis and Approximation of Contact P
Download or read book Contact Problems written by L. A. Galin and published by Springer Science & Business Media. This book was released on 2008-12-31 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: L.A. Galin’s book on contact problems is a remarkable work. Actually there are two books: the first, published in 1953 deals with contact problems in the classical theory of elasticity; this is the one that was translated into English in 1961. The second book, published in 1980, included the first, and then had new sections on contact problems for viscoelastic materials, and rough contact problems; this section has not previously been translated into English. In this new translation, the original text and the mathematical analysis have been completely revised, new material has been added, and the material appearing in the 1980 Russian translation has been completely rewritten. In addition there are three essays by students of Galin, bringing the analysis up to date.
