Download or read book Construction of Photofunctional Materials by Organizing Photoactive Species on Silicas and Silicates with Low Dimensionally Ordered Structures written by 掛川法重 and published by . This book was released on 2004 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Amine Catalyzed Silica Polymerization written by and published by . This book was released on 2007 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current state-of-the-art biomimetic methodologies employed worldwide for the realization of self-assembled nanomaterials are adequate for certain unique applications, but a major breakthrough is needed if these nanomaterials are to obtain their true promise and potential. These routes typically utilize a 'top-down' approach in terms of controlling the nucleation, growth, and deposition of structured nanomaterials. Most of these techniques are inherently limited to primarily 2D and simple 3D structures, and are therefore limited in their ultimate functionality and field of use. Zeolites, one of the best-known and understood synthetic silica structures, typically possess highly ordered silica domains over very small length scales. The development of truly organized and hierarchical zeolites over several length scales remains an intense area of research world wide. Zeolites typically require high-temperature and complex synthesis routes that negatively impact certain economic parameters and, therefore, the ultimate utility of these materials. Nonetheless, zeolite usage is in the tons per year worldwide and is quickly becoming ubiquitous in its applications. In addition to these more mature aspects of current practices in materials science, one of the most promising fields of nanotechnology lies in the advent and control of biologically self-assembled materials, especially those involved with silica and other ceramics such as hydroxyapatite. Nature has derived, through billions of years of evolutionary steps, numerous methods by which fault-tolerant and mechanically robust structures can be created with exquisite control and precision at relatively low temperature ranges and pressures. Diatoms are one of the best known examples that exhibit this degree of structure and control known that is involved with the biomineralization of silica. Diatoms are eukaryotic algae that are ubiquitous in marine and freshwater environments. They are a dominant form of phytoplankton critical to global carbon fixation. The silicified cell wall of the diatom is called the frustule, and the intricate silica structure characteristic of a given species is known as the valve. There are two general classes of diatoms, based on their overall morphologies, the pennate and centric. Diatoms achieve their silicified structures in exact fashion through genetically inspired design rules coupled with precisely directed biochemistry occurring at temperatures ranging from a few degrees Celsius (polar species) to temperatures just over room temperature (tropical species). Different species of diatoms produce markedly different structures. To start with, there are two basic types of frustule macromorphologies: pennate diatoms display bilateral symmetry and centric diatoms show radial symmetry. There are thousands of permutations of these two basic forms and the micromorphology of the valve can be quite complex with all types of pore arrangements and morphologies (Figure 1.1). The detailed morphology of the cell wall of a given diatom species is reproduced with exactness, because the process is genetically encoded. Three types of cell wall proteins have been identified in diatoms; the frustulins, pleuralins, and silaffins. Frustulins are cell wall proteins that form an organic coat to protect the silica structures from dissolution into the aqueous environment. Pleuralins are associated with a specific subcomponent of the frustule during cell division, and play a role in hypotheca-epitheca development. Silaffins from Cylindrotheca fusiformis are short chain-length peptides that play a direct role in the silica polymerization process, and possess unique biochemical post-translation functionalization. Larger proteins with silaffin activity have recently been described in Thalassiosira pseudonana. Frustulins and pleuralins play no role in silica polymerization or structure formation in diatoms, whereas the silaffins are one of the primary polymerization determinants. In addition to the silaffins, a class of long-chain polyamines associated with diatom silica has been identified, and shown to also be involved in the silica polymerization process. The silaffins and polyamines are likely to be the two major determinants of silica polymerization in diatoms. Their involvement in the formation of higher order structure is unclear; there have been suggestions that they self-assemble in various combinations to form the final frustule structure but these are highly speculative as there is no substantial data to support this. It is clear from a long history of electron microscopic observations that a major determinant of silica structure in diatoms is generated by growth and molding of the silica deposition vesicle (SDV), the specialized intracellular compartment were the frustule is made. Diatoms are the focus of research activity on several fronts, including the processes by which their distinct silica frustules are formed.
Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.
Download or read book Hybrid Organic Inorganic Interfaces written by Marie Helene Delville and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das erste Handbuch und gut zugängliche Referenzwerk zu diesem zunehmend wichtigen Thema erläutert in einem anwendungsorientierten Ansatz Synthese, Design, Charakterisierung und Simulation von Grenzflächen bei hybriden organisch-anorganischen Materialien.
Download or read book Functional Polymer Coatings written by Limin Wu and published by John Wiley & Sons. This book was released on 2015-06-15 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on a variety of coatings, this book provides detailed discussion on preparation, novel techniques, recent developments, and design theories to present the advantages of each function and provide the tools for better product performance and properties. • Presents advantages and benefits of properties and applications of the novel coating types • Includes chapters on specific and novel coatings, like nanocomposite, surface wettability tunable, stimuli-responsive, anti-fouling, antibacterial, self-healing, and structural coloring • Provides detailed discussion on recent developments in the field as well as current and future perspectives • Acts as a guide for polymer and materials researchers in optimizing polymer coating properties and increasing product performance
Download or read book Magnetic Functions Beyond the Spin Hamiltonian written by R. Boca and published by Springer Science & Business Media. This book was released on 2006-01-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the spin-Hamiltonian formalism, this work introduces the magnetic parameters through the components of the Lambda-tensor involving only the matrix elements of the angular momentum operator. It presents theoretical formulae necessary in performing the energy level calculations for a multi-term system.
Download or read book Photocatalysis written by Dionysios D Dionysiou and published by Royal Society of Chemistry. This book was released on 2016-03-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: From environmental remediation to alternative fuels, this book explores the numerous important applications of photocatalysis. The book covers topics such as the photocatalytic processes in the treatment of water and air; the fundamentals of solar photocatalysis; the challenges involved in developing self-cleaning photocatalytic materials; photocatalytic hydrogen generation; photocatalysts in the synthesis of chemicals; and photocatalysis in food packaging and biomedical and medical applications. The book also critically discusses concepts for the future of photocatalysis, providing a fascinating insight for researchers. Together with Photocatalysis: Fundamentals and Perspectives, these volumes provide a complete overview to photocatalysis.
Download or read book Membrane Gas Separation written by Benny Freeman and published by John Wiley & Sons. This book was released on 2011-06-20 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas separation membranes offer a number of benefits over other separation technologies, and they play an increasingly important role in reducing the environmental impacts and costs of many industrial processes. This book describes recent and emerging results in membrane gas separation, including highlights of nanoscience and technology, novel polymeric and inorganic membrane materials, new membrane approaches to solve environmental problems e.g. greenhouse gases, aspects of membrane engineering, and recent achievements in industrial gas separation. It includes: Hyperbranched polyimides, amorphous glassy polymers and perfluorinated copolymers Nanocomposite (mixed matrix) membranes Polymeric magnetic membranes Sequestration of CO2 to reduce global warming Industrial applications of gas separation Developed from sessions of the most recent International Congress on Membranes and Membrane Processes, Membrane Gas Separation gives a snapshot of the current situation, and presents both fundamental results and applied achievements.
Download or read book Dynamics of Soft Matter written by VICTORIA GARCIA SAKAI and published by Springer Science & Business Media. This book was released on 2011-12-19 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Soft Matter: Neutron Applications provides an overview of neutron scattering techniques that measure temporal and spatial correlations simultaneously, at the microscopic and/or mesoscopic scale. These techniques offer answers to new questions arising at the interface of physics, chemistry, and biology. Knowledge of the dynamics at these levels is crucial to understanding the soft matter field, which includes colloids, polymers, membranes, biological macromolecules, foams, emulsions towards biological & biomimetic systems, and phenomena involving wetting, friction, adhesion, or microfluidics. Emphasizing the complementarities of scattering techniques with other spectroscopic ones, this volume also highlights the potential gain in combining techniques such as rheology, NMR, light scattering, dielectric spectroscopy, as well as synchrotron radiation experiments. Key areas covered include polymer science, biological materials, complex fluids and surface science.
Download or read book Advances in Chemical Conversions for Mitigating Carbon Dioxide written by T. Inui and published by Elsevier. This book was released on 1998-03-12 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global environmental problems, especially global warming caused by the accelerative accumulation of carbon dioxide in the atmosphere, are of great importance for humans. The world's population is now approaching 6 billion, and is still increasing. Developments in communication systems and transportation tools have made the circulation of information, technologies and materials easier, which results in rapid economic growth, particularly in the East and Southeastern Asian countries. Increased affluence leads to an increased consumption of fossil fuels. Inevitably, this leads to an increase in carbon dioxide emission and environmentally hazardous materials which in turn precipitates climatic changes on a global scale. Recent studies showed that the increase in carbon dioxide emission for last year was the highest in the past seven years, and the total amount of carbon dioxide emission from all over the world reached 6.5 billion tons. Furthermore, one cannot overlook the report which appeared recently in Nature, that the floor-area of the iceberg in the South Pole has already decreased by 25% in the past five decades. Over 260 scientists and engineers from 21 countries who had a strong interest and wished to contribute to solve the carbon dioxide problem attended this conference. The papers presented in this volume cover most of the possibilities of the chemical conversion of carbon dioxide.
Download or read book Flash Chemistry written by Jun-ichi Yoshida and published by John Wiley & Sons. This book was released on 2008-10-13 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Have you ever wished you could speed up your organic syntheses without losing control of the reaction? Flash Chemistry is a new concept which offers an integrated scheme for fast, controlled organic synthesis. It brings together the generation of highly reactive species and their reactions in Microsystems to enable highly controlled organic syntheses on a preparative scale in timescales of a few seconds or less. Flash Chemistry: Fast Organic Synthesis in microsystems is the first book to describe this exciting new technique, with chapters covering: an introduction to flash chemistry reaction dynamics: how fast is the act of chemical transformation, what is the rate of reaction, and what determines the selectivity of a reaction? examples of why flash chemistry is needed: the rapid construction of chemical libraries, rapid synthesis of radioactive PET probes, and on-demand rapid synthesis in industry the generation of highly reactive species through thermal, microwave, chemical, photochemical, and electrochemical activation microsystems: What are microsystems and how are they made? Why is size so important? What are the characteristic features of microsystems? conduction and control of extremely fast reactions using microsystems applications of flash chemistry in organic synthesis polymer synthesis based on flash chemistry industrial applications of flash chemistry Flash Chemistry: Fast Organic Synthesis in Microsystems is an essential introduction to anyone working in organic synthesis, process chemistry, chemical engineering and physical organic chemistry concerned with fundamental aspects of chemical reactions an d synthesis and the production of organic compounds.
Download or read book Surface Photochemistry written by Masakazu Anpo and published by John Wiley & Sons. This book was released on 1996-10-21 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume in the series brings together the latest developments in solid surface photochemistry, providing insights into the most up to date research activities on light-initiated chemical reactions. The book offers a comprehensive study of the photochemical and photophysical properties of molecules on various surfaces like zeolites, metals and metal oxides. Chapter 1 discusses the nature of the photochemical and photophysical reactions occurring on solid surfaces. Subsequent chapters deal with a description of the dynamical aspects of surface photohemistry, a study of the specific nature of photochemistry of molecules included within zeolite cavities and a comprehensive study of the reactivities of photo-generated electron-hole pair states involved in photo-induced and photocatalytic reactions. The book also investigates many possible and actual key applications of solid surface photochemistry, such as molecular photo-devices, photo-chemical vapour deposition of thin layered semiconductors, sensitive optical media and control of photochemical reaction paths as well as efficient photocatalytic reaction processes which will be indispensable for ecologically clean and safe chemical systems. Surface Photochemistry will be of interest to researchers in surface science and also to graduate students interested in catalysis or photo-chemistry. It will be valuable as a reference book for academics in many aspects of materials science.
Download or read book Biopolymer Nanocomposites written by Alain Dufresne and published by John Wiley & Sons. This book was released on 2013-07-18 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets forth the techniques needed to create a vast array of useful biopolymer nanocomposites Interest in biopolymer nanocomposites is soaring. Not only are they green and sustainable materials, they can also be used to develop a broad range of useful products with special properties, from therapeutics to coatings to packaging materials. With contributions from an international team of leading nanoscientists and materials researchers, this book draws together and reviews the most recent developments and techniques in biopolymer nano-composites. It describes the preparation, processing, properties, and applications of bio- polymer nanocomposites developed from chitin, starch, and cellulose, three renewable resources. Biopolymer Nanocomposites features a logical organization and approach that make it easy for readers to take full advantage of the latest science and technology in designing these materials and developing new products and applications. It begins with a chapter reviewing our current understanding of bionanocomposites. Next, the book covers such topics as: Morphological and thermal investigations of chitin-based nanocomposites Applications of starch nanoparticle and starch-based bionanocomposites Spectroscopic characterization of renewable nanoparticles and their composites Nanocellulosic products and their applications Protein-based nanocomposites for food packaging Throughout the book, detailed case studies of industrial applications underscore the unique challenges and opportunities in developing and working with biopolymer nanocomposites. There are also plenty of figures to help readers fully grasp key concepts and techniques. Exploring the full range of applications, Biopolymer Nanocomposites is recommended for researchers in a broad range of industries and disciplines, including biomedical engineering, materials science, physical chemistry, chemical engineering, and polymer science. All readers will learn how to create green, sustainable products and applications using these tremendously versatile materials.
Download or read book Polyurethanes written by Mark F. Sonnenschein and published by John Wiley & Sons. This book was released on 2020-12-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, cohesively written by an expert author with supreme breadth and depth of perspective on polyurethanes, provides a comprehensive overview of all aspects of the science and technology on one of the most commonly produced plastics. Covers the applications, manufacture, and markets for polyurethanes, and discusses analytical methods, reaction mechanisms, morphology, and synthetic routes Provides an up-to-date view of the current markets and trend analysis based on patent activity and updates chapters to include new research Includes two new chapters on PU recycling and PU hybrids, covering the opportunities and challenges in both
Download or read book Introduction to Photocatalysis written by Yoshio Nosaka and published by Royal Society of Chemistry. This book was released on 2019-03-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the basic science of semiconductor photocatalysis together with the various practical applications, this textbook is ideal for graduate students. It covers fundamental principles and applicable techniques of light, solid state physics, electrochemistry, reaction kinetics, and materials processing. A solid understanding of semiconductor photoelectrochemistry is developed through discussing the basic properties of a representative photocatalytic material, TiO2; the basic science of the light absorption phenomenon and the application to the powder suspension useful for the photocatalytic research; and the electronic state of semiconductors. Following this, the textbook moves on to explore photoelectrochemistry; the mechanism and kinetic analysis of photocatalytic reactions; typical fabrication methods of common photocatalysts and the factors for improving photocatalytic activity; and evaluation methods of photocatalytic activity. The textbook concludes by looking at the future prospects of the applications of photocatalysis. This introductory textbook provides a foundation in photocatalysis to supplement graduate courses in catalysis, environmental science, materials science and chemical engineering.
Download or read book Organic Phosphorus Compounds written by G. M. Kosolapoff and published by John Wiley & Sons. This book was released on 1972-12-29 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcellular Injection Molding written by Jingyi Xu and published by John Wiley & Sons. This book was released on 2011-01-06 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important aspects of microcellular injection molding with applications for science and industry. The book includes: experimental rheology and pressure-volume-temperature (PVT) data for different gas materials at real injection molding conditions, new mathematical models, micrographs of rheological and thermodynamic phenomena, and the morphologies of microcellular foam made by injection molding. Further, the author proposes two stages of processing for microcellular injection molding, along with a methodology of systematic analysis for process optimization. This gives critical guidelines for quality and quantity analyses for processing and equipment design.
