Download or read book Constrained Kalman Filtering Via Density Function Truncation for Turbofan Engine Health Estimation written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-29 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This paper develops an analytic method of incorporating state variable inequality constraints in the Kalman filter. The resultant filter truncates the PDF (probability density function) of the Kalman filter estimate at the known constraints and then computes the constrained filter estimate as the mean of the truncated PDF. The incorporation of state variable constraints increases the computational effort of the filter but significantly improves its estimation accuracy. The improvement is demonstrated via simulation results obtained from a turbofan engine model. The turbofan engine model contains 3 state variables, 11 measurements, and 10 component health parameters. It is also shown that the truncated Kalman filter may be a more accurate way of incorporating inequality constraints than other constrained filters (e.g., the projection approach to constrained filtering).Simon, Dan and Simon, Donald L.Glenn Research CenterTURBOFAN ENGINES; PROBABILITY THEORY; KALMAN FILTERS; AIRCRAFT ENGINES; FLIGHT SAFETY; INEQUALITIES; SIMULATION

Download or read book Optimal State Estimation written by Dan Simon and published by John Wiley & Sons. This book was released on 2006-06-19 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bottom-up approach that enables readers to master and apply the latest techniques in state estimation This book offers the best mathematical approaches to estimating the state of a general system. The author presents state estimation theory clearly and rigorously, providing the right amount of advanced material, recent research results, and references to enable the reader to apply state estimation techniques confidently across a variety of fields in science and engineering. While there are other textbooks that treat state estimation, this one offers special features and a unique perspective and pedagogical approach that speed learning: * Straightforward, bottom-up approach begins with basic concepts and then builds step by step to more advanced topics for a clear understanding of state estimation * Simple examples and problems that require only paper and pen to solve lead to an intuitive understanding of how theory works in practice * MATLAB(r)-based source code that corresponds to examples in the book, available on the author's Web site, enables readers to recreate results and experiment with other simulation setups and parameters Armed with a solid foundation in the basics, readers are presented with a careful treatment of advanced topics, including unscented filtering, high order nonlinear filtering, particle filtering, constrained state estimation, reduced order filtering, robust Kalman filtering, and mixed Kalman/H? filtering. Problems at the end of each chapter include both written exercises and computer exercises. Written exercises focus on improving the reader's understanding of theory and key concepts, whereas computer exercises help readers apply theory to problems similar to ones they are likely to encounter in industry. With its expert blend of theory and practice, coupled with its presentation of recent research results, Optimal State Estimation is strongly recommended for undergraduate and graduate-level courses in optimal control and state estimation theory. It also serves as a reference for engineers and science professionals across a wide array of industries.

Download or read book Advanced Control of Turbofan Engines written by Hanz Richter and published by Springer Science & Business Media. This book was released on 2011-10-20 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control of Turbofan Engines describes the operational performance requirements of turbofan (commercial) engines from a controls systems perspective, covering industry-standard methods and research-edge advances. This book allows the reader to design controllers and produce realistic simulations using public-domain software like CMAPSS: Commercial Modular Aero-Propulsion System Simulation, whose versions are released to the public by NASA. The scope of the book is centered on the design of thrust controllers for both steady flight and transient maneuvers. Classical control theory is not dwelled on, but instead an introduction to general undergraduate control techniques is provided. Advanced Control of Turbofan Engines is ideal for graduate students doing research in aircraft engine control and non-aerospace oriented control engineers who need an introduction to the field.

Download or read book Issues in Mechanical Engineering 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 3933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Mechanical Engineering / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Mechanical Engineering. The editors have built Issues in Mechanical Engineering: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Mechanical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Mechanical Engineering: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Optimization for Control Observation and Safety written by Guillermo Valencia-Palomo and published by MDPI. This book was released on 2020-04-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most used tools in control theory to compute control laws, adjust parameters (tuning), estimate states, fit model parameters, find conditions in order to fulfill a given closed-loop property, among others. Optimization also plays an important role in the design of fault detection and isolation systems to prevent safety hazards and production losses that require the detection and identification of faults, as early as possible to minimize their impacts by implementing real-time fault detection and fault-tolerant systems. Recently, it has been proven that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved easily and efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This book offers an overview of the state-of-the-art of the most advanced optimization techniques and their applications in control engineering.

Download or read book Aspects of Computational Intelligence Theory and Applications written by Ladislav Madarász and published by Springer Science & Business Media. This book was released on 2012-08-11 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the state-of-the art of the research and development in various aspects of computational intelligence and gives some perspective directions of development. Except the traditional engineering areas that contain theoretical knowledge, applications, designs and projects, the book includes the area of use of computational intelligence in biomedical engineering. „Aspects of Computational Intelligence: Theory and Applications” is a compilation of carefully selected extended papers written on the basis of original contributions presented at the 15th IEEE International Conference on Intelligence Engineering Systems 2011, INES 2011 held at June 23.-26. 2011 in AquaCity Poprad, Slovakia.

Download or read book Nonparametric identification of nonlinear dynamic systems written by Kenderi, Gábor and published by KIT Scientific Publishing. This book was released on 2018-11-11 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: A nonparametric identification method for highly nonlinear systems is presented that is able to reconstruct the underlying nonlinearities without a priori knowledge of the describing nonlinear functions. The approach is based on nonlinear Kalman Filter algorithms using the well-known state augmentation technique that turns the filter into a dual state and parameter estimator, of which an extension towards nonparametric identification is proposed in the present work.

Download or read book Context Enhanced Information Fusion written by Lauro Snidaro and published by Springer. This book was released on 2016-05-25 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text reviews the fundamental theory and latest methods for including contextual information in fusion process design and implementation. Chapters are contributed by the foremost international experts, spanning numerous developments and applications. The book highlights high- and low-level information fusion problems, performance evaluation under highly demanding conditions, and design principles. A particular focus is placed on approaches that integrate research from different communities, emphasizing the benefit of combining different techniques to overcome the limitations of a single perspective. Features: introduces the terminology and core elements in information fusion and context; presents key themes for context-enhanced information fusion; discusses design issues in developing context-aware fusion systems; provides mathematical grounds for modeling the contextual influences in representative fusion problems; describes the fusion of hard and soft data; reviews a diverse range of applications.

Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2020-12-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest endeavors relating researches and developments conducted in fields of control, robotics and automation. Through more than ten revised and extended articles, the present book aims to provide the most up-to-date state of the art of the aforementioned fields allowing researcher, Ph.D. students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in the same volume a factual and well-balanced prospect of nowadays research in those topics. Special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.

Download or read book Reliability and Statistics in Transportation and Communication written by Igor Kabashkin and published by Springer Nature. This book was released on 2022-02-22 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge theories and methods for analyzing complex systems, such as transportation and communication networks and discusses multi-disciplinary approaches to dependability problems encountered when dealing with complex systems in practice. The book presents the most noteworthy methods and results discussed at the 21st International Multidisciplinary Conference on Reliability and Statistics in Transportation and Communication (RelStat), which took place remotely from Riga, Latvia, on October 14 – 15, 2021. It spans a broad spectrum of topics, from mathematical models and design methodologies, to software engineering, data security and financial issues, as well as practical problems in technical systems, such as transportation and telecommunications, and in engineering education.

Download or read book Distributed Autonomous Robotic Systems written by Fumitoshi Matsuno and published by Springer Nature. This book was released on 2022-01-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in distributed autonomous systems composed of multiple robots, robotic modules, or robotic agents. Swarms in nature can not only adapt to their environments, but can also construct suitable habitats to their own advantage. Distributed autonomous robotic systems can do many things that its individuals cannot do alone. As the global pandemic was still ongoing, the 15th International Symposium on Distributed Autonomous Robotic Systems (DARS2021) was held on June 1–4, 2021, as an online meeting. The scope of DARS201 was to create a bridge between biologists and engineers interested in the distributed intelligence of living things and to establish a new academic field by integrating knowledge from both disciplines. Topics of DARS2021 were swarm intelligence, swarm robotics, multi-agent system, modular robotics, decentralized control, distributed system, etc. The papers in this book provide a very good overview of the state of the art in distributed autonomous robotic systems (DARS). They reflect current research themes in DARS with important contributions. We hope that this book helps to sustain the interest in DARS and triggers new research.

Download or read book Kalman Filtering With Inequality Constraints for Turbofan Engine Health Estimation written by and published by . This book was released on 2003 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This paper develops two analytic methods of incorporating state variable inequality constraints in the Kalman filter. The first method is a general technique of using hard constraints to enforce inequalities on the state variable estimates. The resultant filter is a combination of a standard Kalman filter and a quadratic programming problem. The second method uses soft constraints to estimate state variables that are known to vary slowly with time. (Soft constraints are constraints that are required to be approximately satis- fied rather than exactly satisfied.) The incorporation of state variable constraints increases the computational effort of the filter but significantly improves its estima- tion accuracy. The improvement is proven theoretically and shown via simulation results. The use of the algorithm is demonstrated on a linearized simulation of a turbofan engine to estimate health parameters. The turbofan engine model con- tains 16 state variables, 12 measurements, and 8 component health parameters. It is shown that the new algorithms provide improved performance in this example over unconstrained Kalman filtering.

Download or read book Time Series Analysis by State Space Methods written by James Durbin and published by OUP Oxford. This book was released on 2012-05-03 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition updates Durbin & Koopman's important text on the state space approach to time series analysis. The distinguishing feature of state space time series models is that observations are regarded as made up of distinct components such as trend, seasonal, regression elements and disturbance terms, each of which is modelled separately. The techniques that emerge from this approach are very flexible and are capable of handling a much wider range of problems than the main analytical system currently in use for time series analysis, the Box-Jenkins ARIMA system. Additions to this second edition include the filtering of nonlinear and non-Gaussian series. Part I of the book obtains the mean and variance of the state, of a variable intended to measure the effect of an interaction and of regression coefficients, in terms of the observations. Part II extends the treatment to nonlinear and non-normal models. For these, analytical solutions are not available so methods are based on simulation.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1983-02 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Information Theoretic Learning written by Jose C. Principe and published by Springer Science & Business Media. This book was released on 2010-04-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first cohesive treatment of ITL algorithms to adapt linear or nonlinear learning machines both in supervised and unsupervised paradigms. It compares the performance of ITL algorithms with the second order counterparts in many applications.

Download or read book Kalman Filtering with Inequality Constraints for Turbofan Engine Health Estimation written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-15 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This paper develops two analytic methods of incorporating state variable inequality constraints in the Kalman filter. The first method is a general technique of using hard constraints to enforce inequalities on the state variable estimates. The resultant filter is a combination of a standard Kalman filter and a quadratic programming problem. The second method uses soft constraints to estimate state variables that are known to vary slowly with time. (Soft constraints are constraints that are required to be approximately satisfied rather than exactly satisfied.) The incorporation of state variable constraints increases the computational effort of the filter but significantly improves its estimation accuracy. The improvement is proven theoretically and shown via simulation results. The use of the algorithm is demonstrated on a linearized simulation of a turbofan engine to estimate health parameters. The turbofan engine model contains 16 state variables, 12 measurements, and 8 component health parameters. It is shown that the new algorithms provide improved performance in this example over unconstrained Kalman filtering.Simon, Dan and Simon, Donald L.Glenn Research CenterTURBOFAN ENGINES; AIRCRAFT ENGINES; KALMAN FILTERS; QUADRATIC PROGRAMMING; SYSTEMS HEALTH MONITORING; GAS TURBINE ENGINES; ALGORITHMS; ESTIMATES; INEQUALITIES; SIMULATION

Download or read book Semi Markov Chains and Hidden Semi Markov Models toward Applications written by Vlad Stefan Barbu and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a work that adds much to the sum of our knowledge in a key area of science today. It is concerned with the estimation of discrete-time semi-Markov and hidden semi-Markov processes. A unique feature of the book is the use of discrete time, especially useful in some specific applications where the time scale is intrinsically discrete. The models presented in the book are specifically adapted to reliability studies and DNA analysis. The book is mainly intended for applied probabilists and statisticians interested in semi-Markov chains theory, reliability and DNA analysis, and for theoretical oriented reliability and bioinformatics engineers.