Download or read book Connections for Fluid Power and General Use Hydraulic Couplings Diagnostic written by Hydraulic Tube Fittings Committee and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAE J1502 specifies dimensions, performance requirements, and test procedures for the male half of a diagnostic coupler with either a metric M141.5 or an inch 9/16-18 straight thread stud end. The coupler is designed for use with a mineral based hydraulic fluid. It is used on machines specified in SAE J1116. It does not apply to the mating hydraulic quick action couplings not on the machine.Diagnostic couplings in accordance with SAE J1502 may be used at a working pressure of 42 MPa. The permissible working pressure depends upon the materials, design, working conditions, application, etc.Conformance to the dimensional information in this part of SAE J1502 does not guarantee rated performance. Each manufacturer should perform testing according to the specification contained in this document to ensure that components comply with the performance rating. This SAE Project, S1-J1502-05-01 is intended to rationalize this standard with ISO 15171-1 (Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure) and to accommodate the withdrawal of SAE J2244 and also add O-ring call-outs in accordance with SAE J515. The reinstatement of ISO 725 has also been included.

Download or read book Connections for Fluid Power and General Use Hydraulic Couplings for Diagnostic Purposes Coupling Not for Connection Under Pressure written by British Standards Institute Staff and published by . This book was released on 1999-10-15 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic transmission systems, Hydraulic couplings, Hydraulic equipment, Fluid equipment, Joints, Diagnostic testing, Service pressure, Environment (working), Temperature, Working range, Performance, Burst tests, Endurance testing, Low-pressure tests, Dimensions, Dimensional tolerances, Design, Designations, Marking, External threads, Mineral oils

Download or read book Connections for Fluid Power and General Use Hydraulic Couplings Diagnostic Port Sizes and Locations written by Hydraulic Tube Fittings Committee and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAE J1298 covers the recommended diagnotic port sizes for use in measuring hydraulic fluid temperature, pressure, flow, and for obtaining fluid samples. See SAE J1502 for the detailed coupling specifications.Reviewed the document and updated it. Reference to SAE J2244-2 are removed because that document is beingwithdrawn and replaced by ISO 6149-2. All references to the year of publication of ISO documents are removed as theusers are urged to used the latest edition of the document.

Download or read book Connections for Fluid Power and General Use Hydraulic Couplings for Diagnostic Purposes Coupling with M16 X 2 End for Connection Under Pressure written by British Standards Institute Staff and published by . This book was released on 1916-02-29 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic transmission systems, Hydraulic couplings, Hydraulic equipment, Fluid equipment, Joints, Diagnostic testing, Performance, Dimensions

Download or read book Connections for Fluid Power and General Use Hydrualic Couplings Diagnostic Port Sizes and Locations written by Hydraulic Tube Fittings Committee and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAE J1298 covers the recommended diagnotic port sizes for use in measuring hydraulic fluid temperature, pressure, flow, and for obtaining fluid samples. See SAE J1502 for the detailed coupling specifications.

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings Hose Fittings with ISO 8434 6 60 0D Cone Ends written by British Standards Institute Staff and published by . This book was released on 2009-12-31 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hose connectors, Flexible pipes, Pipe connections, Hydraulic equipment, Hydraulic transmission systems, Pipe couplings, Unalloyed steels, Dimensions, Performance, Designations, Screwed fittings, Threads

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings written by British Standards Institution and published by . This book was released on 2017 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Connections for hydraulic fluid power and general use hose fittings Part 2 Hose fittings with ISO 8434 1 24 cone connector ends with O rings ISO 12151 2 2022 written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings Hose Fittings with ISO 8434 1 and ISO 8434 4 24 0d Cone Connector Ends with O Rings written by British Standards Institute Staff and published by . This book was released on 2003-07-16 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hose connectors, Flexible pipes, Pipe connections, Hydraulic equipment, Hydraulic transmission systems, Fluid equipment, Steels, Dimensions, Design, Toroidal sealing rings, Pipe fittings

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings Hose Fittings with ISO 8434 2 37 0D Flared Ends written by British Standards Institute Staff and published by . This book was released on 2007-08-31 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hose connectors, Flexible pipes, Pipe connections, Hydraulic equipment, Hydraulic transmission systems, Pipe couplings, Bend couplings, Swivel pipe connectors, Unalloyed steels, Dimensions, Performance, Designations, Screwed fittings, Threads

Download or read book Metallic Tube Connections for Fluid Power and General Use Test Methods for Threaded Hydraulic Fluid Power Connectors written by Hydraulic Tube Fittings Committee and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard specifies uniform methods for the testing and performance evaluation of threaded metallic tube connections and stud ends of ports for hydraulic fluid power. Tests outlined within this document are independent of each other and document the method to follow for each test; see the appropriate component SAE or ISO standard for the test(s) requirements and the performance criteria. Appendix A of SAE J1644 is normative; Appendix B is informative.

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings Hose Fittings with ISO 6149 Metric Stud Ends written by British Standards Institute Staff and published by . This book was released on 2007-08-31 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hose connectors, Flexible pipes, Pipe connections, Hydraulic equipment, Hydraulic transmission systems, Stud couplings, Pipe couplings, Bend couplings, Unalloyed steels, Dimensions, Performance, Designations, Screwed fittings, Threads, Assembling

Download or read book Hydraulic Fluid Power Dimensions and Requirements for Screw to Connect Quick Action Couplings for General Purpose written by British Standards Institute Staff and published by . This book was released on 1913-04-30 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic transmission systems, Hydraulic couplings, Dimensions, Performance, Pressure, Size, Ratings, Hydraulic equipment, Pipe connections, Pipe fittings

Download or read book Connections for Hydraulic Fluid Power and General Use Hose Fittings Hose Fittings with ISO 8434 3 O Ring Face Seal Ends written by British Standards Institute Staff and published by . This book was released on 1910-07-31 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipe fittings, Marking, Diameter, Fluid equipment, Hose connectors, Elbows (pipes), Design, Surface treatment, Performance, Dimensions, Production, Pipe connections, Ordering, Hydraulic equipment, Toroidal sealing rings, Flexible pipes, Size, Threads, Finishes, Unalloyed steels, Hydraulic transmission systems

Download or read book Metallic Tube Connections for Fluid Power and General Use Test Methods for Hydraulic Fluid Power Connections written by British Standards Institute Staff and published by . This book was released on 2006-01 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic transmission systems, Hydraulic equipment, Pneumatic transmission systems, Pneumatic equipment, Metals, Pipe connections, Unions, Hose connectors, Stud couplings, Pipe fittings, Mechanical testing, Performance testing

Download or read book Connections for Hydraulic Fluid Power and Genral Use written by British Standards Institution and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallic Tube Connections for Fluid Power and General Use Test Methods for Threaded Hydraulic Fluid Power Connectors HS 150 2000 written by Hydraulic Tube Fittings Committee and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard specifies uniform methods for the testing and performance evaluation of threaded metallic tube connections and stud ends of ports for hydraulic fluid power. Tests outlined within this document are independent of each other and document the method to follow for each test; see the appropriate component SAE or ISO standard for the test(s) requirements and the performance criteria. Appendix A of SAE J1644 is normative; Appendix B is informative.