Download or read book Software Configuration Management Handbook Third Edition written by Alexis Leon and published by Artech House. This book was released on 2015-02-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software configuration management (SCM) is one of the scientific tools that is aimed to bring control to the software development process. This new resource is a complete guide to implementing, operating, and maintaining a successful SCM system for software development. Project managers, system designers, and software developers are presented with not only the basics of SCM, but also the different phases in the software development lifecycle and how SCM plays a role in each phase. The factors that should be considered and the pitfalls that should be avoided while designing the SCM system and SCM plan are also discussed. In addition, this third edition is updated to include cloud computing and on-demand systems. This book does not rely on one specific tool or standard for explaining the SCM concepts and techniques; In fact, it gives readers enough information about SCM, the mechanics of SCM, and SCM implementation, so that they can successfully implement a SCM system.
Download or read book Engineering Documentation Control Handbook written by Frank B. Watts and published by William Andrew. This book was released on 2011-10-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank B. Watts
Download or read book Configuration Management Handbook written by W. V. Eggerman and published by Tab Professional & Reference. This book was released on 1990 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Configuration Management Metrics written by Frank B. Watts and published by William Andrew. This book was released on 2009-08-26 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management Metrics: Product Lifecycle and Engineering Documentation Control Process Measurement and Improvement provides a comprehensive discussion of measurements for configuration management/product lifecycle processes. Each chapter outlines one of the most important measures of merit – the need for written policy and procedures. The best of the best practices as to the optimum standards are listed with an opportunity for the reader to check off those that their company has and those they do not. The book first defines the concept of configuration management (CM) and explains its importance. It then discusses the important metrics in the major CM and related processes. These include: new item release; order entry/fulfillment; request for change; bill of material change cost; and field change. Ancillary processes which may or may not be thought of as part of these major processes are also addressed, including deviations, service parts, publications and field failure reporting. - Provides detailed guidance on developing and implementing measurement systems and reports - Demonstrates methods of graphing and charting data, with benchmarks - A practical resource for the development of Engineering Documentation Control processes - Includes basic principles of Product Lifecycle processes and their measurement
Download or read book Practical Software Configuration Management written by Tim Mikkelsen and published by Prentice Hall. This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basics of configuration management; An introduction to configuration management; Basic configuration management concepts; what next?; What tool do I use to get started?; Configuration management for the individual; Introduction to configuration management for the individual; Nightly development operations with RCS; Release operations; Maintenance operations; Beyond the basics; Choosing a tool for yourself; Recommendations for projects and problems; Next steps for the individual...; Configuration management for the team; Introduction to configuration management for the team; Getting the rest of the team involved with the process; Daily individual development operations with RCS; Daily team interactions; Group activities - pulling it all together; Group activities - getting something out the door again; Beyond the basics; Choosing a tool for your team; Recommendation for teams and team projects; Next steps for a team; Tools; What software is available for configuration management; Tool comparisons; Free, public domain, and shareware tools; Commercial tools; Appendices; Index.
Download or read book Practice Standard for Project Configuration Management written by Project Management Institute and published by Project Management Institute. This book was released on 2007-04-01 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most projects present teams with challenges relating to time, cost and scope. Careful management of these project elements allows projects to be completed successfully. In order to guide a project's direction, project managers utilize the process of configuration management. Project configuration management is the collective body of processes, activities, tools, and methods used to manage certain items during the project lifecycle. Configuration management is implemented to actively guide the direction of the project and support communication that will facilitate successful completion. Due to the increasing complexity of projects and greater competition among companies, the knowledge of configuration management techniques is more important than ever.
Download or read book Configuration Management written by Jon M. Quigley and published by CRC Press. This book was released on 2015-04-16 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management: Theory, Practice, and Application details a comprehensive approach to configuration management from a variety of product development perspectives, including embedded and IT. It provides authoritative advice on how to extend products for a variety of markets due to configuration options.The book also describes the importanc
Download or read book Software Configuration Management Handbook written by Alexis Leon and published by Artech House Publishers. This book was released on 2005 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised edition of an Artech House bestseller goes far beyond other SCM books as the only complete guide that integrates SCM principles, advanced topics, and implementation procedures in one easy-access resource. The second edition has been greatly expanded with new chapters on documentation control, product data management, SCM standards and software process improvement models like CMM, CMMI, BOOTSTRAP, ISO SPICE, and Trillium. Moreover, it explores the latest advances in SCM tools, tool selection and implementation, level of automation needed, SCM organization, implementation, operation and maintenance of the SCM system. In addition to the traditional software development models, this edition discusses the role of SCM in new software development methodologies such as XP, Adaptive Software Development (ASD), and the Dynamic Systems Development Method (DSDM).
Download or read book Software Configuration Management written by Jessica Keyes and published by CRC Press. This book was released on 2004-02-24 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: An effective systems development and design process is far easier to explain than it is to implement. A framework is needed that organizes the life cycle activities that form the process. This framework is Configuration Management (CM). Software Configuration Management discusses the framework from a standards viewpoint, using the original
Download or read book Configuration Management for Senior Managers written by Frank B. Watts and published by Butterworth-Heinemann. This book was released on 2015-04-21 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management for Senior Managers is written to help managers in product manufacturing and engineering environments identify the ways in which they can streamline their products and processes through proactive documentation control and product lifecycle management. Experienced consultant Frank Watts gives a practitioner’s view tailored to the needs of management, without the textbook theory that can be hard to translate into real-world change. Unlike competing books that focus on CM within software and IT environments, this engineering-focused resource is packed with examples and lessons learned from leading product development and manufacturing companies, making it easy to apply the approach to your business. Developed to help you identify key policies and practices needing attention in your organization to establish and maintain consistency of processes and products, and to reduce operational costs Focused on configuration management (CM) within manufacturing and engineering settings, with relevant examples from leading companies Written by an experienced consultant and practitioner with the knowledge to provide real-world insights and solutions, not just textbook theory
Download or read book Configuration Management Second Edition written by Jon M. Quigley and published by CRC Press. This book was released on 2019-07-11 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive approach to configuration management from a variety of product development perspectives, including embedded and IT. It provides authoritative advice on how to extend products for a variety of markets due to configuration options. The book also describes the importance of configuration management to other parts of the organization. It supplies an overview of configuration management and its process elements to provide readers with a contextual understanding of the theory, practice, and application of CM. The book illustrates the interplay of configuration and data management with all enterprise resources during each phase of a product lifecycle.
Download or read book Engineering Documentation Control Handbook written by Frank B. Watts and published by William Andrew. This book was released on 2011-10-11 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of his widely-used Handbook, Frank Watts, widely recognized for his significant contributions to engineering change control processes, provides a thoroughly practical guide to the implementation and improvement of Engineering Documentation Control (EDC), Product Lifecycle Management and Product Configuration Management (CM). Successful and error-free implementation of EDC/CM is critical to world-class manufacturing. Huge amounts of time are wasted in most product manufacturing environments over EDC/CM issues such as interchangeability, document release and change control – resulting in faults, product release delays and overspends. The book is packed with specific methods that can be applied quickly and accurately to almost any industry and any product to control documentation, request changes to the product, implement changes and develop bills of material. The result is a powerful communications bridge between the engineering function and 'the rest of the world' that makes rapid changes in products and documentation possible. With the help of the simple techniques in the handbook, companies can gain and hold their competitive advantages in a world that demands flexibility and quick reflexes – and has no sympathy for delays. The new edition sets EDC/CM in the context of Product Lifecycle Management (PLM), providing guidance on choosing, purchasing and implementing PLM software systems. Watts guides the reader to harness these tools and techniques for business objectives including Process Improvement and time-to-market. - Solid, pragmatic ideas for real product and process cost reduction. According to one reviewer: 'most books focus on the basics without examining all facets of each process area or functional area. This may be good for quickly learning, but it will only take the reader so far. Mr. Watts imparts the same information, but invites the reader to think and to consider strengths and weaknesses of processes and procedures. The copious examples, illustrations and breadth of topics covered make this book "the" reference on EDC and CM.' - Strategic emphasis shows how processes may be integrated and tears down the 'wall' between Engineering and Operations - Thorough description of Product Lifecycle Management software tools
Download or read book Engineering Documentation Control Configuration Management Standards Manual written by Frank B. Watts and published by John Wiley & Sons. This book was released on 2018-04-16 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get to know a key ingredient to world-class product manufacturing With this manual, you have the best of the best management practices for the configuration management processes. It goes a long way toward satisfying Total Quality Management, FDA, GMP, Lean CM and ISO/QS/AS 9XXX process documentation requirements. The one requirement common to all those standards is to document the processes and to do what you document.
Download or read book Handbook of Manufacturing Control written by Hermann Lödding and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unternehmen mit kurzen Lieferzeiten, hoher Liefertreue und niedrigen Beständen wachsen schnell und erzielen hohe Gewinne. Wie Unternehmen diese logistische Herausforderung meistern können, zeigt das Buch anhand von aktuellen Forschungsergebnissen der Leibniz Universität Hannover. Der Band gibt einen umfassenden Überblick über die Aufgaben und Verfahren der Fertigungssteuerung und befähigt Leser dazu, Schwächen in diesem Bereich zu erkennen und zu korrigieren. Ein fundiertes Nachschlagewerk für Studierende, Dozenten, Ingenieure und Wissenschaftler.
Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use
Download or read book Software Configuration Management written by Wayne A. Babich and published by Addison-Wesley Longman. This book was released on 1986 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Configuration Management Best Practices written by Bob Aiello and published by Pearson Education. This book was released on 2010-08-10 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully Implement High-Value Configuration Management Processes in Any Development Environment As IT systems have grown increasingly complex and mission-critical, effective configuration management (CM) has become critical to an organization’s success. Using CM best practices, IT professionals can systematically manage change, avoiding unexpected problems introduced by changes to hardware, software, or networks. Now, today’s best CM practices have been gathered in one indispensable resource showing you how to implement them throughout any agile or traditional development organization. Configuration Management Best Practices is practical, easy to understand and apply, and fully reflects the day-to-day realities faced by practitioners. Bob Aiello and Leslie Sachs thoroughly address all six “pillars” of CM: source code management, build engineering, environment configuration, change control, release engineering, and deployment. They demonstrate how to implement CM in ways that support software and systems development, meet compliance rules such as SOX and SAS-70, anticipate emerging standards such as IEEE/ISO 12207, and integrate with modern frameworks such as ITIL, COBIT, and CMMI. Coverage includes Using CM to meet business objectives, contractual requirements, and compliance rules Enhancing quality and productivity through lean processes and “just-in-time” process improvement Getting off to a good start in organizations without effective CM Implementing a Core CM Best Practices Framework that supports the entire development lifecycle Mastering the “people” side of CM: rightsizing processes, overcoming resistance, and understanding workplace psychology Architecting applications to take full advantage of CM best practices Establishing effective IT controls and compliance Managing tradeoffs and costs and avoiding expensive pitfalls Configuration Management Best Practices is the essential resource for everyone concerned with CM: from CTOs and CIOs to development, QA, and project managers and software engineers to analysts, testers, and compliance professionals.
