Download or read book Production Methods and Workability of Concrete written by P.J.M. Bartos and published by CRC Press. This book was released on 2004-06-02 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical production of ordinary and special, high performance concretes and their behaviour and properties when fresh are the main themes of this book. It derives from the International RILEM Conference held in Paisley, Scotland in June 1996, and represents the culmination of the work of two RILEM Technical Committees (145 WSM Workability of Special Mixes, and 150 ECM Efficiency of Concrete Mixers). Very significant advances have been made recently in the development of concrete with outstanding properties. Such advances in research must be matched by progress in the technology of concrete production. This book focuses on production methods and on workability and handling, two fundamental and closely linked stages of the concrete construction process. It has a strongly practical emphasis, with many contributions showing how to build effectively using the many high performance concretes which have progressed from research into construction in recent years. The main themes covered are: production mixers and mixing processes; production methods; sprayed and very dry precasting mixes; fibre reinforced concrete; flowing and superfluid mixes; rheology; test methods; mix design and models; special cements and concretes.
Download or read book Concrete Workability written by Mohamadreza Moini and published by AuthorHouse. This book was released on 2011 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is trying to help expand the knowledge of fresh concrete workability. Concrete workability depends on lots of parameters and varies significantly with conditional alteration. The temperature is of great importance determining the workability. This book presents theoretical information and experimental discussions investigating the influence of fresh concrete temperature and ingredients on the workability. Programming and different statistical programs are applied to include the most appropriate results. Artificial neural network prediction of workability is investigated in two situations; with and without concrete temperature. The most relevant cutting edge studies on this issue are cited and discussed to support the readers for the future studies. Ce livre essaie de faire progresser la connaissance de la fluidité du béton frais. La fluidité du béton dépend de beaucoup de paramètres et varie de manière significative avec le changement des conditions (température, humidité, souffle du vent, lumière du soleil). La température a beaucoup d'importances pour déterminer la fluidité. Ce livre présente des informations théoriques et des discussions expérimentales pour examiner l'influence de la température du béton frais et les ingrédients sur la fluidité. La programmation et les différents programmes statistiques ont été appliqués afin d'obtenir les résultats les plus appropriés. La prédiction de fluidité de RNA (le réseau de neurones artificiels) a été étudié dans deux situations: avec et sans température du béton frais. Les plus pertinentes recherches, concernant ce sujet, ont été faites pour appuyer les lecteurs aux études futures.
Download or read book Workability and Quality Control of Concrete written by G H Tattersall and published by CRC Press. This book was released on 2003-09-02 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete must be produced with the properties required for its intended applications, for example, it must be workable enough to flow into formwork, and to be compacted. This book deals with the measurement of the flow properties of fresh concrete and the factors which affect its workability. Aspects of concrete mixes and control of manufacture to produce optimum properties which relate to workability are covered.
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Joseph F. Lamond and published by ASTM International. This book was released on 2006 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Portlandcement concrete rheology and workability final report written by and published by DIANE Publishing. This book was released on with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Construction Engineering Handbook written by Edward G. Nawy and published by CRC Press. This book was released on 2008-06-24 with total page 1586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Construction Engineering Handbook, Second Edition provides in depth coverage of concrete construction engineering and technology. It features state-of-the-art discussions on what design engineers and constructors need to know about concrete, focusing on - The latest advances in engineered concrete materials Reinforced concrete construction Specialized construction techniques Design recommendations for high performance With the newly revised edition of this essential handbook, designers, constructors, educators, and field personnel will learn how to produce the best and most durably engineered constructed facilities.
Download or read book Guidelines for Concrete Mixtures Containing Supplementary Cementitious Materials to Enhance Durability of Bridge Decks written by John S. Lawler and published by Transportation Research Board. This book was released on 2007 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP Report 566 is designed to help facilitate the use of supplementary cementitious materials to enhance durability of concrete used in highway construction, especially bridge decks. The report includes a methodology for selecting optimum concrete mixture proportions that focuses on durability aspects of concrete and the performance requirements for specific environmental conditions. The methodology is presented in a text format and as a computational tool, in the form of a Visual Basic?driven Microsoft Excel spreadsheet. Background information and a hypothetical case study was published as NCHRP Web-Only Document 110: Supplementary Cementitious Materials to Enhance Durability of Concrete Bridge Decks. The Statistical Experimental Design for Optimizing Concrete (SEDOC), the computational tool for the concrete mixture optimization methodology, and the user?s guide are available in a ZIP format for download.
Download or read book Fresh Concrete written by P. Bartos and published by Elsevier. This book was released on 2013-10-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.
Download or read book The Rheology of Fresh Concrete written by G. H. Tattersall and published by Pitman Advanced Publishing Program. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Significance of Tests and Properties of Concrete and Concrete Aggregates written by and published by ASTM International. This book was released on 1956 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide for Concrete Floor and Slab Construction written by ACI Committee 302 and published by American Concrete Institute. This book was released on 2004 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICE Handbook of Concrete Durability written by Marios Soutsos and published by Emerald Group Publishing. This book was released on 2023-10-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Handbook of Concrete Durability, second edition is a comprehensive practical reference for professionals involved in design and maintenance of concrete structures of all types. It is an invaluable guide for construction professionals, including design engineers, consultants and contractors, as well as postgraduate students.
Download or read book Construction Estimating Reference Data written by Ed Sarviel and published by Craftsman Book Company. This book was released on 1993 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the 300 most useful manhour tables for practically every item of construction. Labor requirements are listed for sitework, concrete work, masonry, steel, carpentry, thermal and moisture protection, doors and windows, finishes, mechanical, and electrical. Each section details the work being estimated and gives appropriate crew size and equipment needed. This new revised edition contains National Estimator, a computer estimating program. This fast, powerful program and complete instructions are yours free on high-density 3 1/2" disk when you buy the book.
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Paul Klieger and published by ASTM International. This book was released on 1994 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Concrete Mix Design written by Avijit Chaubey and published by CRC Press. This book was released on 2020-03-17 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Concrete Mix Design has been compiled to help readers understand the concrete mix design methodology, including formulas and tables involved in the pertinent steps. This book helps engineers understand the mix design procedure, through illuminating every possible explanation for each step of mix design, limitations given by standards, and practical guides on tailor-making concrete to meet specific requirements. The construction industry needs engineers/experts who can reduce the costs of concrete, and thereby increase their profitability. This book shows effective methods for optimizing concrete and simultaneously achieving the desired properties of concrete. It covers why, how, and when with respect to concrete proportioning and optimization. It further provides the necessary skills for engineers to hone their skills in doing so, understanding the risks involved, and troubleshooting related problems.
Download or read book High strength concrete joint FIP CEB state of the art report written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1990-08-01 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Punching of Structural Concrete Slabs written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Punching is considered to be one of the most difficult problems in structural concrete design and mechanical models or theoretical analyses were developed rather late in the history of concrete research attempts. This fib Bulletin reviews the development of design models and theoretical analyses since the CEB Bulletin 168 Punching Shear in Reinforced Concrete - State-of-the-Art Report published in 1985. The role of the concrete tensile strength was specially addressed. In this respect the present bulletin is also following-up the CEB Bulletin 237 Concrete Tension and Size Effects - Utilisation of concrete tension in structural concrete design and relevance of size effect - Contributions from CEB Task Group 2.7 published in 1997. Apart from new theoretical developments a comprehensive databank for comparisons with experimental evidence is included. About 400 punching tests were critically reviewed and evaluated in a consistent manner. This is thought to be the first step towards a generally agreed selection of reliable tests. The evident value of such a data bank is illustrated by comparisons carried out between the data and some of the analytical proposals as well as empirical code formulas. List of contents : (1) Introduction, (2) Code equations, (3) Mechanical models for punching, (4) New developments for mechanical models, (5) Numerical investigations, (7) Comparison of mechanical models and test results of slabs without shear reinforcement, (8) Comparison of code rules and tests of flat slabs without shear reinforcement, (9) Comparison of codes, models and tests of flat slabs with shear reinforcement, (10) Experimental investigations, (11) Summary and conclusions, References, Appendices : (I) Databank on slabs without shear reinforcement, (II) Databank on slabs with shear reinforcement, (III) Comparison of test data with code rules, (IV) Comparison of test data with selected models, (V) Notations.
