Download or read book Computerized Generation and Simulation of Meshing of Modified Spur and Helical Gears Manufactured by Shaving written by and published by . This book was released on 2001 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of geometry of spur and helical gears with parallel axes and helical gears with crossed axes is proposed. The finishing process of gear generation is shaving. The purposes of modification of the gear geometry are to localize and stabilize the bearing contact, and to reduce noise and vibration. The goals mentioned above are achieved by using profile crowning and plunging the shaver by a prescribed motion during pinion generation. The pinion becomes double crowned. The gear member is generated as a conventional involute gear. A tooth contact analysis (TCA) program for simulation of meshing and contact was developed and the analysis is illustrated with TCA results for spur and helical gears.
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded, edition covers the theory, design, geometry and manufacture of all types of gears and gear drives. This is an invaluable reference for designers, theoreticians, students, and manufacturers. This edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: 1. New geometry for modified spur and helical gears, face-gear drives, and cycloidal pumps. 2. New design approaches for one stage planetary gear trains and spiral bevel gear drives. 3. An enhanced approach for stress analysis of gear drives with FEM. 4. New methods of grinding face gear drives, generating double crowned pinions, and improved helical gear shaving. 5. Broad application of simulation of meshing and TCA. 6. New theories on the simulation of meshing for multi-body systems, detection of cases wherein the contact line on generating surfaces may have its own envelope, and detection and avoidance of singularities of generated surfaces.
Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Mechanical Design written by and published by . This book was released on 2007 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4
Download or read book Noncircular Gears written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2014-03-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noncircular Gears: Design and Generation represents the extension of the modern theory of gearing applied to the design and manufacture of the main types of noncircular gears: conventional and modified elliptical gears, eccentric gears, oval gears, gears with lobes, and twisted gears. This book is enhanced by updated theoretical description of the methods of generation of noncircular gears by enveloping methods similar to those applied to the generation of circular gears. Noncircular Gears: Design and Generation also offers new developments directed to extend the application of noncircular gears for output speed variation and generation of functions. Numerous numerical examples show the application of the developed theory. This book aims to extend the application of noncircular gear drives in mechanisms and industry.
Download or read book Gear Materials Properties and Manufacture written by Joseph R. Davis and published by ASM International. This book was released on 2005 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: All of the critical technical aspects of gear materials technology are addressed in this new reference work. Gear Materials, Properties, and Manufacture is intended for gear metallurgists and materials specialists, manufacturing engineers, lubrication technologists, and analysts concerned with gear failures who seek a better understanding of gear performance and gear life. This volume complements other gear texts that emphasize the design, geometry, and theory of gears. The coverage begins with an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear. This is followed by in-depth treatment of metallic (ferrous and nonferrous alloys) and plastic gear materials. Emphasis is on the properties of carburized steels, the material of choice for high-performance power transmission gearing.
Download or read book Face Gear Drive with Spur Involute Pinion Geometry Generation by a Worm Stress Analysis written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach for determination of: (1) the worm thread surface, (2) avoidance of singularities of the worm thread surface, (3) dressing of the worm, and (4) determination of stresses of the face-gear drive, is proposed. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.
Download or read book Gear Noise and Vibration written by J. Derek Smith and published by CRC Press. This book was released on 2003-04-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on over 40 years of consultation and teaching experience, Gear Noise and Vibration demonstrates logical gear noise and vibration approaches without the use of complex mathematics or lengthy computation methods. The second edition offers new and extended discussions on high- and low-contact ratio gears, lightly loaded gears, planetary and spli
Download or read book Development of Gear Technology and Theory of Gearing written by Faydor L. Litvin and published by . This book was released on 1997 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent developments in the theory of gearing and the modifications in gear geometry necessary to improve the conditions of meshing. Highlighted are low-noise gear drives that have a stable contact during meshing and a predesigned parabolic transmission error function that can handle misalignment during operation without sacrificing the low-noise aspects of operation. This book also provides a comprehensive history of the develoment of the theory of gearing through biographies of major contributors to this field. The author's unique historical perspective was achieved by assiduous research into the lives of courageous, talented, and creative men who made significant contributions to the field of gearing.
Download or read book Gears and Gear Drives written by Damir T. Jelaska and published by John Wiley & Sons. This book was released on 2012-08-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding how gears are formed and how they interact or ‘mesh’ with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book. Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to their classification, geometry, kinematics, accuracy control, load capacity and manufacturing. Cylindrical gear geometry is the basis for dealing with any gear drives, so this is covered in detail. Key features: Contains hundreds of 2D and 3D figures to illustrate all types of gears and gear drives, including planetary and worm gears Includes fundamental derivations and explanations of formulae Enables the reader to know how to carry out accuracy control and load capacity checks for any gear drive Includes directions for the practical design of gears and gear drives Covers DIN and ISO standards in the area Gears and Gear Drives is a comprehensive reference for gears and gear drive professionals and graduate students in mechanical engineering departments and covers everything important to know how to design, control and manufacture gear drives.
Download or read book Automotive Transmissions written by Yong Chen and published by Springer Nature. This book was released on 2020-07-30 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the theory, design and applications of automotive transmissions. It covers multiple categories, e.g. AT, AMT, CVT, DCT and transmissions for electric vehicles, each of which has its own configuration and characteristics. In turn, the book addresses the effective design of transmission gear ratios, structures and control strategies, and other topics that will be of particular interest to graduate students, researchers and engineers. Moreover, it includes real-world solutions, simulation methods and testing procedures. Based on the author’s extensive first-hand experience in the field, the book allows readers to gain a deeper understanding of vehicle transmissions.
Download or read book Gear Motor Handbook written by Bonfiglioli Riduttori S.p.A. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: In these years of constant growth and further development for our company, research and development has become more and more important, and has allowed us to be at the forefront in our business sector, where innovation is the obvious and decisive factor. It has therefore been consistent with our everyday business philosophy to involve ourselves deeply in writing and printing this handbook, which is designed to recognize the capacity and hard work of all employees working successfully in the Bonfiglioli Group. The book is intended to be a concrete contribution by Bonfiglioli Riduttori S.p.A. to the development and application of power transmissions. The book is addressed to all who have technical dealings with power transmissions, from university students to engineers active in the workplace. For this reason we have invited the cooperation of four prestigious professionals - Darle W. Dudley, Jacques Sprengers, Dierk SchrOder, and Hajime Yamashina - in the knowledge that only through the cooperation of the leading specialists in the field of power transmissions could we develop a truly useful and helpful handbook. It has been hard work, but we are sure the reader's appreciation will amply reward our efforts.
Download or read book Gleason Bevel Gear Technology written by Hermann J. Stadtfeld and published by . This book was released on 2014-05-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Cutting Tools written by Stephen P. Radzevich and published by CRC Press. This book was released on 2017-10-16 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gear Cutting Tools: Fundamentals of Design and Computation, Second Edition, presents the DG/K-based method of surface generation, a practical mathematical method for designing gear cutting tools with optimal parameters. The text addresss gear cutting tool evolution, and proceeds to scientific classification for all types of gear machining meshes before discussing optimal cutting tool designs. Designs currently used and those being planned are covered, and the approach allows for development of scientific predictions and optimal designs. Solutions appear in analytical form and/or graphical form, with a wealth of new figures added, and new appendices offer additional data for readers.
